[PATCH 2/2] ARM: dts: stm32mp: alignment with v6.3-rc3

[Patrick DELAUNAY]

Hi,

On 4/18/23 21:14, Marek Vasut wrote:
> On 4/18/23 15:59, Patrick Delaunay wrote:
>> Device tree alignment with Linux kernel v6.3-rc3:
>> - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
>> - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
>> - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
>> - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk
>> - ARM: dts: stm32: Create separate pinmux for qspi cs pin in
>>    stm32mp15-pinctrl.dtsi
>> - ARM: dts: stm32: Rename mdio0 to mdio
>> - ARM: dts: stm32: Replace SAI format with dai-format DT property
>> - ARM: dts: stm32: add adc support to stm32mp13
>> - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
>> - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
>> - ARM: dts: stm32: add adc support on stm32mp135f-dk
>> - ARM: dts: stm32: add PWR fixed regulators on stm32mp131
>> - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
>> - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
>> - ARM: dts: stm32: add USB OTG HS support on stm32mp131
>> - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
>> - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
>> - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
>> - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
>> - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
>> - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
>> - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk
>> - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
>> - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
>> - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
>> - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx
>> - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx
>> - ARM: dts: stm32: Remove the pins-are-numbered property
>> - ARM: dts: stm32: add i2s nodes on stm32mp131
>> - ARM: dts: stm32: add sai nodes on stm32mp131
>> - ARM: dts: stm32: add spdifrx node on stm32mp131
>> - ARM: dts: stm32: add dfsdm node on stm32mp131
>> - ARM: dts: stm32: add timers support on stm32mp131
>> - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk
>> - ARM: dts: stm32: add timers support on stm32mp135f-dk
>> - ARM: dts: stm32: Fix User button on stm32mp135f-dk
>> - ARM: dts: stm32: Use new media bus type macros
>> - ARM: dts: stm32: Update part number NVMEM description on stm32mp131
>
> Please either include commit IDs for all those commits too, or just 
> include commit ID of the kernel version to which these DTs are synced 
> to. I would prefer the later.


OK, I note it


> Also note, Linux 6.3-rc6 is out, so why sync to 6.3-rc3 ?


no reason:  It was the version available when I start the 
synchronization....

and I don't see new patches on the  stm32mp device trees since v6.3-rc1

and the pull request stm32-dt-for-v6.3-1.


I can update the commit message if it is needed.


Patrick