[PATCH 2/3] configs: rockchip: radxa-cm3-io, rock-3a: enable commands for i2c/pmic/regulator

[Kever Yang]

On 2023/4/20 17:56, FUKAUMI Naoki wrote:
> enable commands for i2c/pmic/regulator and relevant configs.
> also drop configs for unused regulators.
>
> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever

> ---
>   configs/radxa-cm3-io-rk3566_defconfig | 8 ++++++--
>   configs/rock-3a-rk3568_defconfig      | 3 ++-
>   2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
> index 2100cf2cb2..9b99181714 100644
> --- a/configs/radxa-cm3-io-rk3566_defconfig
> +++ b/configs/radxa-cm3-io-rk3566_defconfig
> @@ -37,9 +37,12 @@ CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
> @@ -60,8 +63,9 @@ CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
>   CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>   CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
> -CONFIG_REGULATOR_PWM=y
> -CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
>   CONFIG_SPL_RAM=y
>   CONFIG_BAUDRATE=1500000
> diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
> index d24563a504..c03aa2a4c1 100644
> --- a/configs/rock-3a-rk3568_defconfig
> +++ b/configs/rock-3a-rk3568_defconfig
> @@ -41,6 +41,8 @@ CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
> @@ -64,7 +66,6 @@ CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
>   CONFIG_DM_PMIC=y
>   CONFIG_PMIC_RK8XX=y
>   CONFIG_SPL_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
>   CONFIG_SPL_RAM=y