[PATCH 7/7] configs: rock5b-rk3588: add pci drivers and command

[Kever Yang]

Hi Eugen,

On 2023/4/17 17:19, Eugen Hristev wrote:
> Add drivers for pciE , phy, and command.
>
> Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
> ---
>   configs/rock5b-rk3588_defconfig | 6 +++++-
>   1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
> index 8c097ab3a109..a14fcd2ee924 100644
> --- a/configs/rock5b-rk3588_defconfig
> +++ b/configs/rock5b-rk3588_defconfig
> @@ -47,6 +47,7 @@ CONFIG_SPL_ATF=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_SPI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
> @@ -71,7 +72,10 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
>   CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PCI=y
> +CONFIG_PCIE_DW_ROCKCHIP=y
>   CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
Does this board have pcie2 interface and need to enable in U-Boot?
>   CONFIG_SPL_PINCTRL=y
>   CONFIG_REGULATOR_PWM=y
>   CONFIG_DM_REGULATOR_FIXED=y
> @@ -81,7 +85,6 @@ CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_ROCKCHIP_SFC=y
>   CONFIG_SYSRESET=y
> -# CONFIG_BINMAN_FDT is not set
>   CONFIG_USB=y
>   CONFIG_USB_EHCI_HCD=y
>   CONFIG_USB_EHCI_GENERIC=y
> @@ -95,4 +98,5 @@ CONFIG_USB_ETHER_LAN78XX=y
>   CONFIG_USB_ETHER_MCS7830=y
>   CONFIG_USB_ETHER_RTL8152=y
>   CONFIG_USB_ETHER_SMSC95XX=y
> +# CONFIG_BINMAN_FDT is not set

This should have been removed after [1]

Thanks,

- Kever

[1]https://patchwork.ozlabs.org/project/uboot/patch/20230417190708.1982556-2-jonas@kwiboo.se/

>   CONFIG_ERRNO_STR=y