[PATCH 05/14] rockchip: rk3568-evb: Update defconfig

Jonas Karlman jonas at kwiboo.se
Sat Apr 22 03:23:16 CEST 2023


Update defconfig for rk3568-evb with new defaults.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add config options to include useful gpio, i2c, pmic and regulator cmd.

Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
set based on cpuid read from OTP.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Add config options to enable support for the RK809 PMIC.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 configs/evb-rk3568_defconfig | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
index c929bac509c0..0b4fc52e263d 100644
--- a/configs/evb-rk3568_defconfig
+++ b/configs/evb-rk3568_defconfig
@@ -10,9 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
 CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_EVB_RK3568=y
@@ -23,11 +21,12 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x4000000
@@ -36,13 +35,17 @@ CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_CLK=y
@@ -57,7 +60,9 @@ CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
-CONFIG_REGULATOR_PWM=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_SPL_RAM=y
 CONFIG_BAUDRATE=1500000
-- 
2.40.0



More information about the U-Boot mailing list