[PATCH v5 3/3] riscv: dts: starfive: Enable PCIe host controller

Minda Chen minda.chen at starfivetech.com
Sun Apr 23 12:58:59 CEST 2023


From: Mason Huo <mason.huo at starfivetech.com>

Enable and add pinctrl configuration for PCIe host controller.
Also add JH7110 stg syscon configuration.

Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
---
 .../dts/jh7110-starfive-visionfive-2.dtsi     | 11 +++
 arch/riscv/dts/jh7110.dtsi                    | 88 +++++++++++++++++++
 2 files changed, 99 insertions(+)

diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
index c6b6dfa940..12245576ac 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
@@ -7,6 +7,7 @@
 
 #include "jh7110.dtsi"
 #include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
+#include <dt-bindings/gpio/gpio.h>
 / {
 	aliases {
 		serial0 = &uart0;
@@ -300,6 +301,16 @@
 	};
 };
 
+&pcie0 {
+	reset-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pcie1 {
+	reset-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &syscrg {
 	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
 			  <&syscrg JH7110_SYSCLK_BUS_ROOT>,
diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
index bd60879615..f210dfc99c 100644
--- a/arch/riscv/dts/jh7110.dtsi
+++ b/arch/riscv/dts/jh7110.dtsi
@@ -569,5 +569,93 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		pcie0: pcie at 2b000000 {
+			compatible = "starfive,jh7110-pcie";
+			reg = <0x0 0x2b000000 0x0 0x1000000
+			       0x9 0x40000000 0x0 0x10000000>;
+			reg-names = "reg", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
+				 <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
+			interrupts = <56>;
+			interrupt-parent = <&plic>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+			device_type = "pci";
+			starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+			clock-names = "noc", "tl", "axi", "apb";
+			resets = <&stgcrg JH7110_STGRST_PCIE0_MST0>,
+				 <&stgcrg JH7110_STGRST_PCIE0_SLV0>,
+				 <&stgcrg JH7110_STGRST_PCIE0_SLV>,
+				 <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+				 <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+				 <&stgcrg JH7110_STGRST_PCIE0_APB>;
+			reset-names = "mst0", "slv0", "slv", "brg",
+				      "core", "apb";
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie1: pcie at 2c000000 {
+			compatible = "starfive,jh7110-pcie";
+			reg = <0x0 0x2c000000 0x0 0x1000000
+			       0x9 0xc0000000 0x0 0x10000000>;
+			reg-names = "reg", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x82000000  0x0 0x38000000  0x0 0x38000000 0x0 0x08000000>,
+				 <0xc3000000  0x9 0x80000000  0x9 0x80000000 0x0 0x40000000>;
+			interrupts = <57>;
+			interrupt-parent = <&plic>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
+			device_type = "pci";
+			starfive,stg-syscon = <&stg_syscon 0x270 0x274 0x2e0 0x368>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&pcie1>;
+			msi-controller;
+			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+			clock-names = "noc", "tl", "axi", "apb";
+			resets = <&stgcrg JH7110_STGRST_PCIE1_MST0>,
+				 <&stgcrg JH7110_STGRST_PCIE1_SLV0>,
+				 <&stgcrg JH7110_STGRST_PCIE1_SLV>,
+				 <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+				 <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+				 <&stgcrg JH7110_STGRST_PCIE1_APB>;
+			reset-names = "mst0", "slv0", "slv", "brg",
+				      "core", "apb";
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
 	};
 };
-- 
2.17.1



More information about the U-Boot mailing list