[PATCH v3 10/13] smegw01: Add lockdown U-Boot env support
Fabio Estevam
festevam at gmail.com
Mon Apr 24 13:12:03 CEST 2023
From: Eduard Strehlau <eduard at lionizers.com>
Add lockdown U-Boot env support so that only certain U-Boot environment
variables are allowed to be modified.
Signed-off-by: Eduard Strehlau <eduard at lionizers.com>
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
Changes since v2:
- None
board/storopack/smegw01/Kconfig | 7 +++++
board/storopack/smegw01/smegw01.c | 17 +++++++++++
configs/smegw01_defconfig | 11 ++++++-
include/configs/smegw01.h | 48 +++++++++++++++++++++++++++++--
4 files changed, 79 insertions(+), 4 deletions(-)
diff --git a/board/storopack/smegw01/Kconfig b/board/storopack/smegw01/Kconfig
index d8f24695d0..390214c285 100644
--- a/board/storopack/smegw01/Kconfig
+++ b/board/storopack/smegw01/Kconfig
@@ -12,4 +12,11 @@ config SYS_CONFIG_NAME
config IMX_CONFIG
default "board/storopack/smegw01/imximage.cfg"
+config SYS_BOOT_LOCKED
+ bool "Lock boot process to EMMC"
+ default y
+ help
+ Say N here if you want to boot from eMMC and SD.
+ Say Y to boot from eMMC.
+
endif
diff --git a/board/storopack/smegw01/smegw01.c b/board/storopack/smegw01/smegw01.c
index 9482f88773..e786429476 100644
--- a/board/storopack/smegw01/smegw01.c
+++ b/board/storopack/smegw01/smegw01.c
@@ -14,6 +14,7 @@
#include <asm/io.h>
#include <common.h>
#include <env.h>
+#include <env_internal.h>
#include <asm/arch/crm_regs.h>
#include <asm/setup.h>
#include <asm/bootm.h>
@@ -113,3 +114,19 @@ uint mmc_get_env_part(struct mmc *mmc)
return part;
}
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+ if (op == ENVOP_SAVE || op == ENVOP_ERASE)
+ return ENVL_MMC;
+
+ switch (prio) {
+ case 0:
+ return ENVL_NOWHERE;
+
+ case 1:
+ return ENVL_MMC;
+ }
+
+ return ENVL_UNKNOWN;
+}
diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig
index 54cf1cfc1f..ea25b3b87c 100644
--- a/configs/smegw01_defconfig
+++ b/configs/smegw01_defconfig
@@ -7,6 +7,7 @@ CONFIG_ENV_OFFSET=0x100000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7d-smegw01"
CONFIG_TARGET_SMEGW01=y
+# CONFIG_SYS_BOOT_LOCKED is not set
CONFIG_ENV_OFFSET_REDUND=0x110000
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
# CONFIG_ARMV7_VIRT is not set
@@ -17,13 +18,18 @@ CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0xa0000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_BOOTMENU_DISABLE_UBOOT_CONSOLE=y
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if test \"${ustate}\" = 1; then setenv upgrade_available 1; saveenv; fi; if run loadimage; then run mmcboot; else run altbootcmd; fi; "
+CONFIG_BOOTCOMMAND="if test \"${ustate}\" = 1; then setenv upgrade_available 1; saveenv; fi; run mmcboot; "
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run setup_boot_menu;"
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_PBSIZE=532
# CONFIG_CMD_BOOTD is not set
CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MEMTEST=y
@@ -43,9 +49,12 @@ CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ENV_WRITEABLE_LIST=y
+CONFIG_ENV_ACCESS_IGNORE_FORCE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOOTCOUNT_LIMIT=y
diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h
index 8521883277..6f373973ab 100644
--- a/include/configs/smegw01.h
+++ b/include/configs/smegw01.h
@@ -22,6 +22,32 @@
#define EXTRA_BOOTPARAMS
#endif
+#ifdef CONFIG_SYS_BOOT_LOCKED
+#define EXTRA_ENV_FLAGS
+#define SETUP_BOOT_MENU "setup_boot_menu=setenv bootmenu_0 eMMC=run bootcmd\0"
+#else
+#define EXTRA_ENV_FLAGS "mmcdev:dw,"
+#define SETUP_BOOT_MENU "setup_boot_menu=" \
+ "if test \"${mmcdev}\" = 1; then " \
+ "setenv emmc_priority 0;" \
+ "setenv sd_priority 1;" \
+ "else " \
+ "setenv emmc_priority 1;" \
+ "setenv sd_priority 0;" \
+ "fi;" \
+ "setenv bootmenu_${emmc_priority} eMMC=run boot_emmc;" \
+ "setenv bootmenu_${sd_priority} SD=run boot_sd;\0"
+#endif
+
+#define CFG_ENV_FLAGS_LIST_STATIC \
+ "mmcpart:dw," \
+ "mmcpart_committed:dw," \
+ "ustate:dw," \
+ "bootcount:dw," \
+ "bootlimit:dw," \
+ "upgrade_available:dw," \
+ EXTRA_ENV_FLAGS
+
#define CFG_EXTRA_ENV_SETTINGS \
"image=fitImage\0" \
"console=ttymxc0\0" \
@@ -40,13 +66,28 @@
"fi;\0" \
"bootlimit=3\0" \
"fit_addr=0x88000000\0" \
- "loadimage=load mmc ${mmcdev}#rootfs-${mmcpart_committed} ${fit_addr} boot/${image}\0" \
+ "loadimage=load mmc ${mmcdev}:${gpt_partition_entry} ${fit_addr} boot/${image}\0" \
"loadpart=gpt setenv mmc ${mmcdev} rootfs-${mmcpart_committed}\0" \
"loadbootpart=mmc partconf 1 boot_part\0" \
- "mmcboot=echo Booting from mmc ...; " \
+ "boot_sd=setenv mmcdev_wanted 0; run persist_mmcdev; run bootcmd;\0" \
+ "boot_emmc=setenv mmcdev_wanted 1; run persist_mmcdev; run bootcmd;\0" \
+ "persist_mmcdev=" \
+ "if test \"${mmcdev}\" != \"${mmcdev_wanted}\"; then " \
+ "setenv mmcdev \"${mmcdev_wanted}\";" \
+ "saveenv;" \
+ "fi;\0" \
+ "mmcboot=echo Booting...; " \
+ "echo mmcdev: ${mmcdev}; " \
"run commit_mmc; " \
+ "echo mmcpart: ${mmcpart_committed}; " \
"run loadpart; " \
+ "echo gptpart: ${gpt_partition_entry}; " \
"run loadbootpart; " \
+ "if run loadimage; then " \
+ "; " \
+ "else " \
+ "run altbootcmd; " \
+ "fi; " \
"run mmcargs; " \
"if bootm ${fit_addr}; then " \
"; " \
@@ -61,7 +102,8 @@
"setenv mmcpart 1; " \
"setenv mmcpart_committed 1;" \
"fi; setenv bootcount 0; setenv upgrade_available; setenv ustate 3; saveenv; " \
- "run bootcmd;\0"
+ "run bootcmd;\0" \
+ SETUP_BOOT_MENU
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
--
2.38.1
More information about the U-Boot
mailing list