[PATCH v3 09/19] am65: dts: binman: Package tiboot3.bin, sysfw.itb, tispl.bin, u-boot.img

[Simon Glass]

Hi Neha,

On Fri, 21 Apr 2023 at 06:32, Neha Malcom Francis <n-francis at ti.com> wrote:
>
> Support added for HS and GP boot binaries for AM65x.
>
> tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img: For HS devices
> tiboot3.bin_unsigned, sysfw.itb, tispl.bin_unsigned,
> u-boot.img_unsigned: For GP devices
>
> Note that the bootflow followed by AM65x requires:
>
> tiboot3.bin:
>         * R5 SPL
>         * R5 SPL dtbs
> sysfw.itb:
>         * sysfw
>         * board-cfg
>         * pm-cfg
>         * sec-cfg
>         * rm-cfg
>
> tispl.bin:
>         * ATF
>         * OPTEE
>         * A53 SPL
>         * A53 SPL dtbs
>
> u-boot.img:
>         * A53 U-Boot
>         * A53 U-Boot dtbs
>
> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
> ---
>  arch/arm/dts/k3-am654-base-board-u-boot.dtsi  |   1 +
>  .../dts/k3-am654-r5-base-board-u-boot.dtsi    |   1 +
>  arch/arm/dts/k3-am65x-binman.dtsi             | 551 ++++++++++++++++++
>  board/ti/am65x/Kconfig                        |   2 +
>  4 files changed, 555 insertions(+)
>  create mode 100644 arch/arm/dts/k3-am65x-binman.dtsi

Reviewed-by: Simon Glass <sjg at chromium.org>

Is there any way that these boards could share a .dtsi with just the
different bits in each board's dtsi? There seems to be a lot of
duplicate.

Regards,
Simon