[PATCH v2 23/30] ide: Make ide_ident() return an error code
Simon Glass
sjg at chromium.org
Tue Apr 25 18:54:48 CEST 2023
Update ide_ident() to indicate whether it finds a device or not. Use
that to decide whether to create a block device for it, rather than
looking DEV_TYPE_UNKNOWN.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
drivers/block/ide.c | 101 +++++++++++++++++++++++---------------------
1 file changed, 53 insertions(+), 48 deletions(-)
diff --git a/drivers/block/ide.c b/drivers/block/ide.c
index 835e781fccb..16b119ecbe1 100644
--- a/drivers/block/ide.c
+++ b/drivers/block/ide.c
@@ -534,15 +534,21 @@ static void atapi_inquiry(struct blk_desc *desc)
desc->lba48 = false;
}
-static void ide_ident(struct blk_desc *desc)
+/**
+ * ide_ident() - Identify an IDE device
+ *
+ * @device: Device number to use
+ * @desc: Block descriptor to fill in
+ * Returns: 0 if OK, -ENOENT if no device is found
+ */
+static int ide_ident(int device, struct blk_desc *desc)
{
unsigned char c;
hd_driveid_t iop;
bool is_atapi = false;
int tries = 1;
- int device;
- device = desc->devnum;
+ desc->devnum = device;
printf(" Device %d: ", device);
/* Select device
@@ -604,7 +610,7 @@ static void ide_ident(struct blk_desc *desc)
}
if (!tries) /* Not found */
- return;
+ return -ENOENT;
ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
@@ -620,7 +626,7 @@ static void ide_ident(struct blk_desc *desc)
if (IS_ENABLED(CONFIG_ATAPI) && is_atapi) {
desc->atapi = true;
atapi_inquiry(desc);
- return;
+ return 0;
}
iop.lba_capacity[0] = be16_to_cpu(iop.lba_capacity[0]);
@@ -661,6 +667,8 @@ static void ide_ident(struct blk_desc *desc)
udelay(50);
c = ide_wait(device, IDE_TIME_OUT); /* can't take over 500 ms */
#endif
+
+ return 0;
}
/**
@@ -1017,64 +1025,61 @@ static int ide_probe(struct udevice *udev)
schedule();
for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) {
+ struct blk_desc *desc;
+ struct udevice *blk;
+ lbaint_t size;
+ char name[20];
+ int blksz;
+ int ret;
+
if (!bus_ok[IDE_BUS(i)])
continue;
ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
ide_dev_desc[i].uclass_id = UCLASS_IDE;
- ide_dev_desc[i].devnum = i;
ide_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
ide_dev_desc[i].blksz = 0;
ide_dev_desc[i].log2blksz =
LOG2_INVALID(typeof(ide_dev_desc[i].log2blksz));
ide_dev_desc[i].lba = 0;
- ide_ident(&ide_dev_desc[i]);
+ ret = ide_ident(i, &ide_dev_desc[i]);
dev_print(&ide_dev_desc[i]);
- if (ide_dev_desc[i].type != DEV_TYPE_UNKNOWN) {
- struct udevice *blk_dev;
- struct blk_desc *desc;
- lbaint_t size;
- char name[20];
- int blksz;
- int ret;
+ if (ret)
+ continue;
- sprintf(name, "blk#%d", i);
+ sprintf(name, "blk#%d", i);
- blksz = ide_dev_desc[i].blksz;
- size = blksz * ide_dev_desc[i].lba;
+ blksz = ide_dev_desc[i].blksz;
+ size = blksz * ide_dev_desc[i].lba;
- /*
- * With CDROM, if there is no CD inserted, blksz will
- * be zero, don't bother to create IDE block device.
- */
- if (!blksz)
- continue;
- ret = blk_create_devicef(udev, "ide_blk", name,
- UCLASS_IDE, i,
- blksz, size, &blk_dev);
- if (ret)
- return ret;
-
- ret = blk_probe_or_unbind(blk_dev);
- if (ret)
- return ret;
-
- /* fill in device vendor/product/rev strings */
- desc = dev_get_uclass_plat(blk_dev);
- strlcpy(desc->vendor, ide_dev_desc[desc->devnum].vendor,
- BLK_VEN_SIZE);
- strlcpy(desc->product,
- ide_dev_desc[desc->devnum].product,
- BLK_PRD_SIZE);
- strlcpy(desc->revision,
- ide_dev_desc[desc->devnum].revision,
- BLK_REV_SIZE);
-
- ret = bootdev_setup_for_dev(udev, "ide_bootdev");
- if (ret)
- return log_msg_ret("bootdev", ret);
- }
+ /*
+ * With CDROM, if there is no CD inserted, blksz will
+ * be zero, don't bother to create IDE block device.
+ */
+ if (!blksz)
+ continue;
+ ret = blk_create_devicef(udev, "ide_blk", name, UCLASS_IDE, i,
+ blksz, size, &blk);
+ if (ret)
+ return ret;
+
+ ret = blk_probe_or_unbind(blk);
+ if (ret)
+ return ret;
+
+ /* fill in device vendor/product/rev strings */
+ desc = dev_get_uclass_plat(blk);
+ strlcpy(desc->vendor, ide_dev_desc[desc->devnum].vendor,
+ BLK_VEN_SIZE);
+ strlcpy(desc->product, ide_dev_desc[desc->devnum].product,
+ BLK_PRD_SIZE);
+ strlcpy(desc->revision, ide_dev_desc[desc->devnum].revision,
+ BLK_REV_SIZE);
+
+ ret = bootdev_setup_for_dev(udev, "ide_bootdev");
+ if (ret)
+ return log_msg_ret("bootdev", ret);
}
return 0;
--
2.40.0.634.g4ca3ef3211-goog
More information about the U-Boot
mailing list