[PATCH v2 2/7] pci: pcie_dw_rockchip: Support max_link_speed dts property

[Eugen Hristev]

From: Jon Lin <jon.lin at rock-chips.com>

Add support for max_link_speed specified in the PCI DT binding.

Signed-off-by: Jon Lin <jon.lin at rock-chips.com>
[eugen.hristev at collabora.com: port to latest API, set default correctly,
align to 80 chars]
Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
[jonas at kwiboo.se: switch to dev_read_u32_default]
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
Changes in v2:
 - move to dev_read_u32_default

 drivers/pci/pcie_dw_rockchip.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie_dw_rockchip.c b/drivers/pci/pcie_dw_rockchip.c
index ff121046604a..60c74bea24b2 100644
--- a/drivers/pci/pcie_dw_rockchip.c
+++ b/drivers/pci/pcie_dw_rockchip.c
@@ -42,6 +42,7 @@ struct rk_pcie {
 	struct clk_bulk	clks;
 	struct reset_ctl_bulk	rsts;
 	struct gpio_desc	rst_gpio;
+	u32		gen;
 };
 
 /* Parameters for the waiting for iATU enabled routine */
@@ -331,7 +332,7 @@ static int rockchip_pcie_init_port(struct udevice *dev)
 	rk_pcie_writel_apb(priv, 0x0, 0xf00040);
 	pcie_dw_setup_host(&priv->dw);
 
-	ret = rk_pcie_link_up(priv, LINK_SPEED_GEN_3);
+	ret = rk_pcie_link_up(priv, priv->gen);
 	if (ret < 0)
 		goto err_link_up;
 
@@ -397,6 +398,9 @@ static int rockchip_pcie_parse_dt(struct udevice *dev)
 		goto rockchip_pcie_parse_dt_err_phy_get_by_index;
 	}
 
+	priv->gen = dev_read_u32_default(dev, "max-link-speed",
+					 LINK_SPEED_GEN_3);
+
 	return 0;
 
 rockchip_pcie_parse_dt_err_phy_get_by_index:
-- 
2.34.1