[PATCH 2/3] arm: dts: imx8mn: Sync with Linux 6.3
Fabio Estevam
festevam at gmail.com
Thu Apr 27 20:08:44 CEST 2023
From: Fabio Estevam <festevam at denx.de>
Sync imx8mn.dtsi with Linux 6.3.
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
arch/arm/dts/imx8mn.dtsi | 46 ++++++++++++++++++++++++++++++----------
1 file changed, 35 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx8mn.dtsi b/arch/arm/dts/imx8mn.dtsi
index cb2836bfbd95..9e0ddd6b7a32 100644
--- a/arch/arm/dts/imx8mn.dtsi
+++ b/arch/arm/dts/imx8mn.dtsi
@@ -139,6 +139,7 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
@@ -295,6 +296,7 @@
sai2: sai at 30020000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
+ #sound-dai-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@@ -309,6 +311,7 @@
sai3: sai at 30030000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
+ #sound-dai-cells = <0>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@@ -323,6 +326,7 @@
sai5: sai at 30050000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
+ #sound-dai-cells = <0>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@@ -339,6 +343,7 @@
sai6: sai at 30060000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
+ #sound-dai-cells = <0>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@@ -396,6 +401,7 @@
sai7: sai at 300b0000 {
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x300b0000 0x10000>;
+ #sound-dai-cells = <0>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
<&clk IMX8MN_CLK_DUMMY>,
@@ -497,6 +503,8 @@
compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
reg = <0x30260000 0x10000>;
clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+ nvmem-cells = <&tmu_calib>;
+ nvmem-cell-names = "calib";
#thermal-sensor-cells = <0>;
};
@@ -551,7 +559,7 @@
reg = <0x30330000 0x10000>;
};
- gpr: iomuxc-gpr at 30340000 {
+ gpr: syscon at 30340000 {
compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
@@ -563,23 +571,40 @@
#address-cells = <1>;
#size-cells = <1>;
- imx8mn_uid: unique-id at 410 {
+ /*
+ * The register address below maps to the MX8M
+ * Fusemap Description Table entries this way.
+ * Assuming
+ * reg = <ADDR SIZE>;
+ * then
+ * Fuse Address = (ADDR * 4) + 0x400
+ * Note that if SIZE is greater than 4, then
+ * each subsequent fuse is located at offset
+ * +0x10 in Fusemap Description Table (e.g.
+ * reg = <0x4 0x8> describes fuses 0x410 and
+ * 0x420).
+ */
+ imx8mn_uid: unique-id at 4 { /* 0x410-0x420 */
reg = <0x4 0x8>;
};
- cpu_speed_grade: speed-grade at 10 {
+ cpu_speed_grade: speed-grade at 10 { /* 0x440 */
reg = <0x10 4>;
};
- fec_mac_address: mac-address at 90 {
+ tmu_calib: calib at 3c { /* 0x4f0 */
+ reg = <0x3c 4>;
+ };
+
+ fec_mac_address: mac-address at 90 { /* 0x640 */
reg = <0x90 6>;
};
};
- anatop: anatop at 30360000 {
- compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
- "syscon";
+ anatop: clock-controller at 30360000 {
+ compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
reg = <0x30360000 0x10000>;
+ #clock-cells = <1>;
};
snvs: snvs at 30370000 {
@@ -662,7 +687,6 @@
pgc_otg1: power-domain at 1 {
#power-domain-cells = <0>;
reg = <IMX8MN_POWER_DOMAIN_OTG1>;
- power-domains = <&pgc_hsiomix>;
};
pgc_gpumix: power-domain at 2 {
@@ -1076,7 +1100,7 @@
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
- power-domains = <&pgc_otg1>;
+ power-domains = <&pgc_hsiomix>;
status = "disabled";
};
@@ -1094,7 +1118,6 @@
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
@@ -1103,7 +1126,7 @@
gpmi: nand-controller at 33002000 {
compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -1175,5 +1198,6 @@
assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
clock-names = "main_clk";
+ power-domains = <&pgc_otg1>;
};
};
--
2.34.1
More information about the U-Boot
mailing list