[PATCH 1/3] arm: dts: imx8mm: Sync with Linux 6.3
Adam Ford
aford173 at gmail.com
Thu Apr 27 21:23:05 CEST 2023
On Thu, Apr 27, 2023 at 1:08 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> From: Fabio Estevam <festevam at denx.de>
>
> Sync imx8mm.dtsi with Linux 6.3.
>
> The motivation for doing this sync was a bug when doing "ums 0 mmc 1"
> on imx8mm-evk. It worked well for the first time, but after doing
> a CTRL+C and launching the ums again, the command did not work.
>
> Adam Ford suggested to sync imx8mm.dtsi with the Linux dts, as there was
> a recent USB power domain reorganization there.
>
> After syncing the imx8mm.dtsi with Linux, the ums command works without
> problem after a CTRL+C.
>
> Suggested-by: Adam Ford <aford173 at gmail.com>
> Signed-off-by: Fabio Estevam <festevam at denx.de>
Reviewed-by: Adam Ford <aford173 at gmail.com>
> ---
> arch/arm/dts/imx8mm.dtsi | 52 +++++++++++++++++++++++++++++-----------
> 1 file changed, 38 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
> index afb90f59c83c..31f4548f85cf 100644
> --- a/arch/arm/dts/imx8mm.dtsi
> +++ b/arch/arm/dts/imx8mm.dtsi
> @@ -139,6 +139,7 @@
> A53_L2: l2-cache0 {
> compatible = "cache";
> cache-level = <2>;
> + cache-unified;
> cache-size = <0x80000>;
> cache-line-size = <64>;
> cache-sets = <512>;
> @@ -276,6 +277,7 @@
> assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
> assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
> clock-names = "main_clk";
> + power-domains = <&pgc_otg1>;
> };
>
> usbphynop2: usbphynop2 {
> @@ -285,6 +287,7 @@
> assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
> assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
> clock-names = "main_clk";
> + power-domains = <&pgc_otg2>;
> };
>
> soc: soc at 0 {
> @@ -493,6 +496,8 @@
> compatible = "fsl,imx8mm-tmu";
> reg = <0x30260000 0x10000>;
> clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
> + nvmem-cells = <&tmu_calib>;
> + nvmem-cell-names = "calib";
> #thermal-sensor-cells = <0>;
> };
>
> @@ -547,8 +552,8 @@
> reg = <0x30330000 0x10000>;
> };
>
> - gpr: iomuxc-gpr at 30340000 {
> - compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
> + gpr: syscon at 30340000 {
> + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
> reg = <0x30340000 0x10000>;
> };
>
> @@ -560,22 +565,40 @@
> #address-cells = <1>;
> #size-cells = <1>;
>
> - imx8mm_uid: unique-id at 410 {
> + /*
> + * The register address below maps to the MX8M
> + * Fusemap Description Table entries this way.
> + * Assuming
> + * reg = <ADDR SIZE>;
> + * then
> + * Fuse Address = (ADDR * 4) + 0x400
> + * Note that if SIZE is greater than 4, then
> + * each subsequent fuse is located at offset
> + * +0x10 in Fusemap Description Table (e.g.
> + * reg = <0x4 0x8> describes fuses 0x410 and
> + * 0x420).
> + */
> + imx8mm_uid: unique-id at 4 { /* 0x410-0x420 */
> reg = <0x4 0x8>;
> };
>
> - cpu_speed_grade: speed-grade at 10 {
> + cpu_speed_grade: speed-grade at 10 { /* 0x440 */
> reg = <0x10 4>;
> };
>
> - fec_mac_address: mac-address at 90 {
> + tmu_calib: calib at 3c { /* 0x4f0 */
> + reg = <0x3c 4>;
> + };
> +
> + fec_mac_address: mac-address at 90 { /* 0x640 */
> reg = <0x90 6>;
> };
> };
>
> - anatop: anatop at 30360000 {
> - compatible = "fsl,imx8mm-anatop", "syscon";
> + anatop: clock-controller at 30360000 {
> + compatible = "fsl,imx8mm-anatop";
> reg = <0x30360000 0x10000>;
> + #clock-cells = <1>;
> };
>
> snvs: snvs at 30370000 {
> @@ -674,13 +697,11 @@
> pgc_otg1: power-domain at 2 {
> #power-domain-cells = <0>;
> reg = <IMX8MM_POWER_DOMAIN_OTG1>;
> - power-domains = <&pgc_hsiomix>;
> };
>
> pgc_otg2: power-domain at 3 {
> #power-domain-cells = <0>;
> reg = <IMX8MM_POWER_DOMAIN_OTG2>;
> - power-domains = <&pgc_hsiomix>;
> };
>
> pgc_gpumix: power-domain at 4 {
> @@ -1186,7 +1207,7 @@
> assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
> phys = <&usbphynop1>;
> fsl,usbmisc = <&usbmisc1 0>;
> - power-domains = <&pgc_otg1>;
> + power-domains = <&pgc_hsiomix>;
> status = "disabled";
> };
>
> @@ -1206,7 +1227,7 @@
> assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
> phys = <&usbphynop2>;
> fsl,usbmisc = <&usbmisc2 0>;
> - power-domains = <&pgc_otg2>;
> + power-domains = <&pgc_hsiomix>;
> status = "disabled";
> };
>
> @@ -1238,16 +1259,15 @@
> <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
> #dma-cells = <1>;
> dma-channels = <4>;
> clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
> };
>
> - gpmi: nand-controller at 33002000{
> + gpmi: nand-controller at 33002000 {
> compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
> #address-cells = <1>;
> - #size-cells = <1>;
> + #size-cells = <0>;
> reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
> reg-names = "gpmi-nand", "bch";
> interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1282,6 +1302,10 @@
> <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> fsl,max-link-speed = <2>;
> linux,pci-domain = <0>;
> + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
> + <&clk IMX8MM_CLK_PCIE1_PHY>,
> + <&clk IMX8MM_CLK_PCIE1_AUX>;
> + clock-names = "pcie", "pcie_bus", "pcie_aux";
> power-domains = <&pgc_pcie>;
> resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
> <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
> --
> 2.34.1
>
More information about the U-Boot
mailing list