[RFC PATCH v1 3/7] clk: k210: Move soc_clk_dump function

[Igor Prusov]

Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.

Signed-off-by: Igor Prusov <ivprusov at sberdevices.ru>
---
 drivers/clk/clk_k210.c | 92 +++++++++++++++++++++---------------------
 1 file changed, 46 insertions(+), 46 deletions(-)

diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
index c534cc07e0..2f17152021 100644
--- a/drivers/clk/clk_k210.c
+++ b/drivers/clk/clk_k210.c
@@ -1238,52 +1238,6 @@ static int k210_clk_request(struct clk *clk)
 	return 0;
 }
 
-static const struct clk_ops k210_clk_ops = {
-	.request = k210_clk_request,
-	.set_rate = k210_clk_set_rate,
-	.get_rate = k210_clk_get_rate,
-	.set_parent = k210_clk_set_parent,
-	.enable = k210_clk_enable,
-	.disable = k210_clk_disable,
-};
-
-static int k210_clk_probe(struct udevice *dev)
-{
-	int ret;
-	struct k210_clk_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr_ptr(dev_get_parent(dev));
-	if (!priv->base)
-		return -EINVAL;
-
-	ret = clk_get_by_index(dev, 0, &priv->in0);
-	if (ret)
-		return ret;
-
-	/*
-	 * Force setting defaults, even before relocation. This is so we can
-	 * set the clock rate for PLL1 before we relocate into aisram.
-	 */
-	if (!(gd->flags & GD_FLG_RELOC))
-		clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
-
-	return 0;
-}
-
-static const struct udevice_id k210_clk_ids[] = {
-	{ .compatible = "canaan,k210-clk" },
-	{ },
-};
-
-U_BOOT_DRIVER(k210_clk) = {
-	.name = "k210_clk",
-	.id = UCLASS_CLK,
-	.of_match = k210_clk_ids,
-	.ops = &k210_clk_ops,
-	.probe = k210_clk_probe,
-	.priv_auto = sizeof(struct k210_clk_priv),
-};
-
 #if IS_ENABLED(CONFIG_CMD_CLK)
 static char show_enabled(struct k210_clk_priv *priv, int id)
 {
@@ -1342,3 +1296,49 @@ int soc_clk_dump(void)
 	return 0;
 }
 #endif
+
+static const struct clk_ops k210_clk_ops = {
+	.request = k210_clk_request,
+	.set_rate = k210_clk_set_rate,
+	.get_rate = k210_clk_get_rate,
+	.set_parent = k210_clk_set_parent,
+	.enable = k210_clk_enable,
+	.disable = k210_clk_disable,
+};
+
+static int k210_clk_probe(struct udevice *dev)
+{
+	int ret;
+	struct k210_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr_ptr(dev_get_parent(dev));
+	if (!priv->base)
+		return -EINVAL;
+
+	ret = clk_get_by_index(dev, 0, &priv->in0);
+	if (ret)
+		return ret;
+
+	/*
+	 * Force setting defaults, even before relocation. This is so we can
+	 * set the clock rate for PLL1 before we relocate into aisram.
+	 */
+	if (!(gd->flags & GD_FLG_RELOC))
+		clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
+
+	return 0;
+}
+
+static const struct udevice_id k210_clk_ids[] = {
+	{ .compatible = "canaan,k210-clk" },
+	{ },
+};
+
+U_BOOT_DRIVER(k210_clk) = {
+	.name = "k210_clk",
+	.id = UCLASS_CLK,
+	.of_match = k210_clk_ids,
+	.ops = &k210_clk_ops,
+	.probe = k210_clk_probe,
+	.priv_auto = sizeof(struct k210_clk_priv),
+};
-- 
2.34.1