[PATCH 00/42] imx: i.MX9 update
Stefan Roese
sr at denx.de
Fri Apr 28 07:46:34 CEST 2023
On 4/28/23 06:08, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> This patchset includes updates mainly for i.MX9, such as Clock, Memory,
> Parts, Low drive mode, DDR, cpu driver, Variants
>
> The first patch is not about i.MX9, just include it here since it is a simple
> one for i.MX8ULP.
>
> For the watchdog reset_cpu, I will move it out from watchdog driver in future
> patches which would includes other changes. I include it here mainly for
> sysreset support.
Good to hear, thanks for working on this.
Thanks,
Stefan
> This patchset depends on two patches from Marek:
> https://patchwork.ozlabs.org/project/uboot/patch/20230404192510.160819-1-marex@denx.de/
> https://patchwork.ozlabs.org/project/uboot/patch/20230404192510.160819-2-marex@denx.de/
>
> Jacky Bai (4):
> ddr: imx9: Change the saved ddr data base to 0x2051c000
> ddr: imx93: Add 625M bypass clock support
> ddr: imx93: update the ddr init to support mult setpoints
> ddr: imx9: update the rank setting for multi fsp support
>
> Peng Fan (33):
> imx8ulp: build ahab
> imx: spl_imx_romapi: typo fix
> imx: move imx8 sci header file to include/firmware/imx
> imx: firmware: sci: add inline functions when IMX8 not enabled
> imx: imx8_cpu: use static for local functions
> imx: imx8_cpu: support i.MX9
> imx: imx8_cpu: support get temperature for i.MX9
> imx: imx8_cpu: print cpu grade temperature
> imx9: configure M33 systick to 24M
> imx9: add more PLL settings
> imx9: use parameter freq when set_arm_clk
> imx9: correct getting LPI2C clk
> imx9: simplify clk settings
> imx9: cut off OPTEE memory region from U-Boot
> imx9: imx93_evk: enable CPU_IMX
> imx9: imx93_evk: drop unused macro
> imx9: imx93_evk: select IMX_TMU
> imx9: imx93_evk: enable CONFIG_WDT
> watchdog: ulp_wdog: guard reset_cpu with condition check
> imx9: soc: support reset cause
> imx9: Get market segment and speed grading
> imx9: clock: clear HW_CTRL_SEL
> imx9: clock: add CONFIG_IMX9_LOW_DRIVE_MODE support
> imx9: clock: config arm alt root to 500mhz
> imx9: add i.MX93 variants support
> imx9: correct coding style
> imx9: use i.MX generic rom api function
> imx9: imx93_evk: add low drive mode support on 11x11 EVK
> arm: dts: imx93: sync device tree with Linux
> arm: dts: imx93: add tmu
> imx9: imx93_evk: Update spl stack & bss base address
> imx9: imx93_evk: update ddr timing file
> imx9: imx93_evk: enable sysreset
>
> Ye Li (5):
> thermal: imx_tmu: Update TMU driver to support iMX93
> imx9: Change hard coded MAC to read from fuse
> imx9: allow to bootaux Mcore with input address
> ddr: imx9: Add workaround for DDRPHY rank-to-rank errata
> imx9: Calculate DDR size from DDRC setting
>
> arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 29 -
> arch/arm/dts/imx93-11x11-evk.dts | 385 +-
> arch/arm/dts/imx93-pinfunc.h | 194 +-
> arch/arm/dts/imx93.dtsi | 618 +--
> arch/arm/include/asm/arch-imx/cpu.h | 7 +
> arch/arm/include/asm/arch-imx8/power-domain.h | 2 +-
> arch/arm/include/asm/arch-imx8/sci/sci.h | 138 -
> arch/arm/include/asm/arch-imx8/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-imx8m/ddr.h | 2 +-
> arch/arm/include/asm/arch-imx9/clock.h | 6 +
> arch/arm/include/asm/arch-imx9/ddr.h | 23 +-
> arch/arm/include/asm/arch-imx9/imx-regs.h | 3 +
> arch/arm/include/asm/mach-imx/sys_proto.h | 12 +-
> arch/arm/mach-imx/cmd_dek.c | 2 +-
> arch/arm/mach-imx/imx8/ahab.c | 2 +-
> arch/arm/mach-imx/imx8/cpu.c | 2 +-
> arch/arm/mach-imx/imx8/fdt.c | 2 +-
> arch/arm/mach-imx/imx8/iomux.c | 2 +-
> arch/arm/mach-imx/imx8/misc.c | 2 +-
> arch/arm/mach-imx/imx8/snvs_security_sc.c | 2 +-
> arch/arm/mach-imx/imx8ulp/Kconfig | 5 +
> arch/arm/mach-imx/imx8ulp/Makefile | 1 +
> arch/arm/mach-imx/imx9/Kconfig | 5 +
> arch/arm/mach-imx/imx9/clock.c | 113 +-
> arch/arm/mach-imx/imx9/imx_bootaux.c | 10 +-
> arch/arm/mach-imx/imx9/soc.c | 384 +-
> arch/arm/mach-imx/parse-container.c | 2 +-
> arch/arm/mach-imx/spl_imx_romapi.c | 2 +-
> .../imx8qm_rom7720_a1/imx8qm_rom7720_a1.c | 2 +-
> board/advantech/imx8qm_rom7720_a1/spl.c | 2 +-
> board/congatec/cgtqmx8/cgtqmx8.c | 2 +-
> board/freescale/imx8qm_mek/imx8qm_mek.c | 2 +-
> board/freescale/imx8qxp_mek/imx8qxp_mek.c | 2 +-
> board/freescale/imx8qxp_mek/spl.c | 2 +-
> board/freescale/imx93_evk/MAINTAINERS | 1 +
> board/freescale/imx93_evk/Makefile | 4 +
> board/freescale/imx93_evk/lpddr4x_timing.c | 3361 ++++++++++-------
> board/freescale/imx93_evk/lpddr4x_timing_ld.c | 1496 ++++++++
> board/freescale/imx93_evk/spl.c | 26 +-
> board/siemens/capricorn/board.c | 2 +-
> board/toradex/apalis-imx8/apalis-imx8.c | 2 +-
> board/toradex/colibri-imx8x/colibri-imx8x.c | 2 +-
> configs/imx93_11x11_evk_defconfig | 12 +-
> configs/imx93_11x11_evk_ld_defconfig | 125 +
> drivers/clk/imx/clk-imx8.c | 2 +-
> drivers/clk/imx/clk-imx8qm.c | 2 +-
> drivers/clk/imx/clk-imx8qxp.c | 2 +-
> drivers/cpu/Kconfig | 6 +
> drivers/cpu/Makefile | 1 +
> drivers/cpu/imx8_cpu.c | 142 +-
> drivers/cpu/imx9_cpu.c | 224 ++
> drivers/ddr/imx/imx9/Kconfig | 2 +-
> drivers/ddr/imx/imx9/ddr_init.c | 289 +-
> drivers/ddr/imx/phy/ddrphy_utils.c | 3 +
> drivers/ddr/imx/phy/helper.c | 5 +-
> drivers/misc/imx8/fuse.c | 2 +-
> drivers/misc/imx8/scu.c | 2 +-
> drivers/misc/imx8/scu_api.c | 2 +-
> drivers/pinctrl/nxp/pinctrl-scu.c | 2 +-
> .../power/domain/imx8-power-domain-legacy.c | 2 +-
> drivers/power/domain/imx8-power-domain.c | 2 +-
> drivers/thermal/Kconfig | 6 +-
> drivers/thermal/imx_scu_thermal.c | 2 +-
> drivers/thermal/imx_tmu.c | 101 +
> drivers/watchdog/ulp_wdog.c | 2 +
> include/configs/imx93_evk.h | 2 -
> include/dt-bindings/clock/imx93-clock.h | 17 +-
> include/dt-bindings/power/fsl,imx93-power.h | 15 +
> include/dt-bindings/power/imx93-power.h | 12 -
> .../firmware/imx}/sci/rpc.h | 0
> include/firmware/imx/sci/sci.h | 379 ++
> .../firmware/imx}/sci/svc/misc/api.h | 0
> .../firmware/imx}/sci/svc/pad/api.h | 0
> .../firmware/imx}/sci/svc/pm/api.h | 0
> .../firmware/imx}/sci/svc/rm/api.h | 2 +-
> .../firmware/imx}/sci/svc/seco/api.h | 2 +-
> .../firmware/imx}/sci/types.h | 0
> 77 files changed, 5864 insertions(+), 2366 deletions(-)
> delete mode 100644 arch/arm/include/asm/arch-imx8/sci/sci.h
> create mode 100644 board/freescale/imx93_evk/lpddr4x_timing_ld.c
> create mode 100644 configs/imx93_11x11_evk_ld_defconfig
> create mode 100644 drivers/cpu/imx9_cpu.c
> create mode 100644 include/dt-bindings/power/fsl,imx93-power.h
> delete mode 100644 include/dt-bindings/power/imx93-power.h
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/rpc.h (100%)
> create mode 100644 include/firmware/imx/sci/sci.h
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/misc/api.h (100%)
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/pad/api.h (100%)
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/pm/api.h (100%)
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/rm/api.h (98%)
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/svc/seco/api.h (96%)
> rename {arch/arm/include/asm/arch-imx8 => include/firmware/imx}/sci/types.h (100%)
>
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list