[PATCH v2 10/10] configs: rockchip: rock5b-rk3588: enable DFU and related configs

Eugen Hristev eugen.hristev at collabora.com
Tue Aug 1 09:28:11 CEST 2023


Enable DFU and related configs, expand stack and buffers to hold
downloaded image.

Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
---
Changes in v2:
- added # CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
because with the configs enabled here, this is automatically set as =y
and this causes a build failure.

 configs/rock5b-rk3588_defconfig | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
index 3976a6c0f05c..ca70073f3ccc 100644
--- a/configs/rock5b-rk3588_defconfig
+++ b/configs/rock5b-rk3588_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SYS_MALLOC_F_LEN=0x500000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -16,9 +17,9 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK_R_ADDR=0x1000000
 CONFIG_TARGET_ROCK5B_RK3588=y
-CONFIG_SPL_STACK=0x400000
+CONFIG_SPL_STACK=0x1000000
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -30,6 +31,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x50000000
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5b.dtb"
@@ -41,12 +43,17 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x4000000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
 CONFIG_SPL_ATF=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -59,10 +66,12 @@ CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_CLK=y
+CONFIG_DFU_RAM=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000
 # CONFIG_USB_FUNCTION_FASTBOOT is not set
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
@@ -93,6 +102,7 @@ CONFIG_ROCKCHIP_SFC=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 # CONFIG_USB_XHCI_DWC3_OF_SIMPLE is not set
 CONFIG_USB_EHCI_HCD=y
@@ -111,7 +121,9 @@ CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_USB_GADGET=y
+CONFIG_SPL_USB_GADGET=y
 CONFIG_USB_GADGET_PRODUCT_NUM=0x350b
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_SPL_DFU=y
 CONFIG_ERRNO_STR=y
-- 
2.34.1



More information about the U-Boot mailing list