[PATCH v2 2/2] arm: dts: k3-am64: Sync DT with Linux v6.5-rc1

Nishanth Menon nm at ti.com
Tue Aug 1 14:36:58 CEST 2023


On 15:27-20230731, Roger Quadros wrote:
> Sync all am642-evm/am642-sk related DT files
> with Linux v6.5-rc1.
> 
> - drop timer1 in favor of main_timer0 in am64-main.dtsi.
> Need to delete clock & power domain properties of
> main_timer1 in -r5.dts else won't boot.

As we discussed in IRC, we should document the rationale

> - drop cpsw3g custom DT property 'mac_efuse' and custom
> DT node cpsw-phy-sel as driver picks these from standard
> property/node.
> 
> Signed-off-by: Roger Quadros <rogerq at kernel.org>
> ---
[...]

> diff --git a/arch/arm/dts/k3-am642-r5-evm.dts b/arch/arm/dts/k3-am642-r5-evm.dts
> index b49064181a..fd9e9a6489 100644
> --- a/arch/arm/dts/k3-am642-r5-evm.dts
> +++ b/arch/arm/dts/k3-am642-r5-evm.dts

Same with the evm and sk dts files.

> @@ -13,12 +13,17 @@
>  / {
>  	chosen {
>  		stdout-path = "serial2:115200n8";
> -		tick-timer = &timer1;
>  	};
>  
>  	aliases {
>  		remoteproc0 = &sysctrler;
>  		remoteproc1 = &a53_0;
> +		serial1 = &main_uart1;
> +		serial2 = &main_uart0;
> +		i2c0 = &main_i2c0;
> +		mmc0 = &sdhci0;
> +		mmc1 = &sdhci1;
> +		ethernet0 = &cpsw_port1;

Why do we need any of these?
>  	};
>  
>  	memory at 80000000 {

	We dont need this either.
> @@ -210,6 +215,13 @@
>  			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
>  		>;
>  	};
> +
> +	main_i2c0_pins_default: main-i2c0-default-pins {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
> +			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
> +		>;
> +	};

we should drop all the pinmuxes - they come in from board.dts.

>  };
>  
>  &dmsc {
> @@ -227,6 +239,7 @@
>  	/delete-property/ clock-names;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_uart0_pins_default>;
> +	current-speed = <115200>;
>  	status = "okay";
>  };
>  
> @@ -267,6 +280,10 @@
>  
>  /* EEPROM might be read before SYSFW is available */
>  &main_i2c0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_i2c0_pins_default>;
> +	clock-frequency = <400000>;
>  	/delete-property/ power-domains;
>  };


We should be inheriting stuff from board.dts.
>  
> @@ -282,4 +299,11 @@
>  	pinctrl-0 = <&main_usb0_pins_default>;
>  };
>  
> +&main_timer0 {
> +	/delete-property/ clocks;
> +	/delete-property/ assigned-clocks;
> +	/delete-property/ assigned-clock-parents;
> +	/delete-property/ power-domains;

This needs documentation.

> +};
> +
>  #include "k3-am642-evm-u-boot.dtsi"
> diff --git a/arch/arm/dts/k3-am642-r5-sk.dts b/arch/arm/dts/k3-am642-r5-sk.dts
> index 32d4c31728..5487973e6e 100644
> --- a/arch/arm/dts/k3-am642-r5-sk.dts
> +++ b/arch/arm/dts/k3-am642-r5-sk.dts
> @@ -15,12 +15,17 @@
>  / {
>  	chosen {
>  		stdout-path = "serial2:115200n8";
> -		tick-timer = &timer1;
>  	};
>  
>  	aliases {
>  		remoteproc0 = &sysctrler;
>  		remoteproc1 = &a53_0;
> +		serial1 = &main_uart1;
> +		serial2 = &main_uart0;
> +		i2c0 = &main_i2c0;
> +		mmc1 = &sdhci1;
> +		ethernet0 = &cpsw_port1;
> +		ethernet1 = &cpsw_port2;
>  	};
>  
>  	memory at 80000000 {
> @@ -178,6 +183,13 @@
>  			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
>  		>;
>  	};
> +
> +	main_i2c0_pins_default: main-i2c0-default-pins {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
> +			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
> +		>;
> +	};
>  };
>  
>  &dmsc {
> @@ -189,12 +201,22 @@
>  	ti,secure-host;
>  };
>  
> +/* EEPROM might be read before SYSFW is available */
> +&main_i2c0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_i2c0_pins_default>;
> +	clock-frequency = <400000>;
> +	/delete-property/ power-domains;
> +};
> +
>  &main_uart0 {
>  	/delete-property/ power-domains;
>  	/delete-property/ clocks;
>  	/delete-property/ clock-names;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_uart0_pins_default>;
> +	current-speed = <115200>;
>  	status = "okay";
>  };
>  
> @@ -264,4 +286,11 @@
>  	};
>  };
>  
> +&main_timer0 {
> +	/delete-property/ clocks;
> +	/delete-property/ assigned-clocks;
> +	/delete-property/ assigned-clock-parents;
> +	/delete-property/ power-domains;
> +};
> +
>  #include "k3-am642-sk-u-boot.dtsi"

Move the u-boot.dtsi include to the very top after board.dts is
included. - Same with the evm dts.


-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D


More information about the U-Boot mailing list