[PATCH v2 4/7] phy: rockchip: snps-pcie3: Add bifurcation support for RK3568
Jonas Karlman
jonas at kwiboo.se
Wed Aug 2 21:28:33 CEST 2023
Configure aggregation or bifurcation mode on RK3568 based on the value
of data-lanes property.
Code imported almost 1:1 from mainline linux driver.
Fixes: 6ec62b6ca698 ("phy: rockchip: Add Rockchip Synopsys PCIe 3.0 PHY")
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v2:
- Add fixes tag
.../phy/rockchip/phy-rockchip-snps-pcie3.c | 65 +++++++++++++++++--
1 file changed, 59 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index b76b5386bef0..642819b1f672 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -16,9 +16,16 @@
#include <dm/device_compat.h>
#include <dm/lists.h>
-#define GRF_PCIE30PHY_CON1 0x4
-#define GRF_PCIE30PHY_CON6 0x18
-#define GRF_PCIE30PHY_CON9 0x24
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1 0x4
+#define GRF_PCIE30PHY_CON6 0x18
+#define GRF_PCIE30PHY_CON9 0x24
+#define GRF_PCIE30PHY_DA_OCM (BIT(15) | BIT(31))
+#define GRF_PCIE30PHY_STATUS0 0x80
+#define GRF_PCIE30PHY_WR_EN (0xf << 16)
+#define SRAM_INIT_DONE(reg) (reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1 BIT(0)
/**
* struct rockchip_p3phy_priv - RK DW PCIe PHY state
@@ -27,12 +34,16 @@
* @phy_grf: The regmap for controlling pipe signal
* @p30phy: The reset signal for PHY
* @clks: The clocks for PHY
+ * @num_lanes: The number of lane to controller mappings
+ * @lanes: The lane to controller mapping
*/
struct rockchip_p3phy_priv {
void __iomem *mmio;
struct regmap *phy_grf;
struct reset_ctl p30phy;
struct clk_bulk clks;
+ int num_lanes;
+ u32 lanes[4];
};
struct rockchip_p3phy_ops {
@@ -42,15 +53,40 @@ struct rockchip_p3phy_ops {
static int rockchip_p3phy_rk3568_init(struct phy *phy)
{
struct rockchip_p3phy_priv *priv = dev_get_priv(phy->dev);
+ bool bifurcation = false;
+ int ret;
+ u32 reg;
/* Deassert PCIe PMA output clamp mode */
- regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9,
- (0x1 << 15) | (0x1 << 31));
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, GRF_PCIE30PHY_DA_OCM);
+
+ for (int i = 0; i < priv->num_lanes; i++) {
+ if (priv->lanes[i] > 1)
+ bifurcation = true;
+ }
+
+ /* Set bifurcation if needed, and it doesn't care RC/EP */
+ if (bifurcation) {
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+ GRF_PCIE30PHY_WR_EN | RK3568_BIFURCATION_LANE_0_1);
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+ GRF_PCIE30PHY_DA_OCM);
+ } else {
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+ GRF_PCIE30PHY_WR_EN & ~RK3568_BIFURCATION_LANE_0_1);
+ }
reset_deassert(&priv->p30phy);
udelay(1);
- return 0;
+ ret = regmap_read_poll_timeout(priv->phy_grf,
+ GRF_PCIE30PHY_STATUS0,
+ reg, SRAM_INIT_DONE(reg),
+ 0, 500);
+ if (ret)
+ dev_err(phy->dev, "lock failed 0x%x\n", reg);
+
+ return ret;
}
static const struct rockchip_p3phy_ops rk3568_ops = {
@@ -103,6 +139,23 @@ static int rockchip_p3phy_probe(struct udevice *dev)
return PTR_ERR(priv->phy_grf);
}
+ ret = dev_read_size(dev, "data-lanes");
+ if (ret > 0) {
+ priv->num_lanes = ret / sizeof(u32);
+ if (priv->num_lanes < 2 ||
+ priv->num_lanes > ARRAY_SIZE(priv->lanes)) {
+ dev_err(dev, "unsupported data-lanes property size\n");
+ return -EINVAL;
+ }
+
+ ret = dev_read_u32_array(dev, "data-lanes", priv->lanes,
+ priv->num_lanes);
+ if (ret) {
+ dev_err(dev, "failed to read data-lanes property\n");
+ return ret;
+ }
+ }
+
ret = reset_get_by_name(dev, "phy", &priv->p30phy);
if (ret) {
dev_err(dev, "no phy reset control specified\n");
--
2.41.0
More information about the U-Boot
mailing list