[PATCH v18 4/9] arm_ffa: introduce Arm FF-A support
Abdellatif El Khlifi
abdellatif.elkhlifi at arm.com
Thu Aug 3 18:03:45 CEST 2023
Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0
The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.
This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.
The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.
All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.
Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.
FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.
Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).
The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.
The driver exports its operations to be used by upper layers.
Exported operations:
- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap
Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).
For more details please refer to the driver documentation [2].
[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: Jens Wiklander <jens.wiklander at linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
Changelog:
===============
v13:
* doc minor change: specify in the readme that the user
should call ffa_rxtx_unmap() driver operation to unmap
the RX/TX buffers on demand.
v12:
* remove dscvry_info
* replace dscvry_info.invoke_ffa_fn() with a weak invoke_ffa_fn
(user drivers can override it)
* improve FFA_PARTITION_INFO_GET implementation
(clients no longer need to calloc a buffer)
* address nits
v11:
* move ffa_try_discovery() from the uclass to the Arm FF-A driver
* rename ffa_try_discovery() to arm_ffa_discover()
* pass dev as an argument of arm_ffa_discover()
* add arm_ prefix to the Arm FF-A driver functions
* add emul field in struct ffa_discovery_info
* address nits
v10:
* provide the driver operations through the Uclass
* move the generic FF-A methods to the Uclass
* keep Arm specific methods in the Arm driver (arm-ffa.c)
* rename core.c to arm-ffa.c
* address nits
v9:
* integrate the FF-A bus discovery in the DM and use ARM_SMCCC_FEATURES for binding
v8:
* make ffa_get_partitions_info() second argument to be an SP count in both
modes
* update ffa_bus_prvdata_get() to return a pointer rather than a pointer
address
* remove packing from ffa_partition_info and ffa_send_direct_data structures
* pass the FF-A bus device to the bus operations
v7:
* add support for 32-bit direct messaging
* rename be_uuid_str_to_le_bin() to uuid_str_to_le_bin()
* improve the declaration of error handling mapping
* stating in doc/arch/arm64.ffa.rst that EFI runtime is not supported
v6:
* drop use of EFI runtime support (We decided with Linaro to add this later)
* drop discovery from initcalls (discovery will be on demand by FF-A users)
* set the alignment of the RX/TX buffers to the larger translation granule size
* move FF-A RX/TX buffers unmapping at ExitBootServices() to a separate commit
* update the documentation and move it to doc/arch/arm64.ffa.rst
v4:
* add doc/README.ffa.drv
* moving the FF-A driver work to drivers/firmware/arm-ffa
* use less #ifdefs in lib/efi_loader/efi_boottime.c and replace
#if defined by #if CONFIG_IS_ENABLED
* improving error handling by mapping the FF-A errors to standard errors
and logs
* replacing panics with an error log and returning an error code
* improving features discovery in FFA_FEATURES by introducing
rxtx_min_pages private data field
* add ffa_remove and ffa_unbind functions
* improve how the driver behaves when bus discovery is done more than
once
v3:
* align the interfaces of the U-Boot FF-A driver with those in the linux
FF-A driver
* remove the FF-A helper layer
* make the U-Boot FF-A driver independent from EFI
* provide an optional config that enables copying the driver data to EFI
runtime section at ExitBootServices service
* use 64-bit version of FFA_RXTX_MAP, FFA_MSG_SEND_DIRECT_{REQ, RESP}
v2:
* make FF-A bus discoverable using device_{bind, probe} APIs
* remove device tree support
v1:
* introduce FF-A bus driver with device tree support
MAINTAINERS | 8 +
doc/arch/arm64.ffa.rst | 236 ++++
doc/arch/index.rst | 1 +
drivers/Makefile | 1 +
drivers/firmware/Kconfig | 1 +
drivers/firmware/arm-ffa/Kconfig | 36 +
drivers/firmware/arm-ffa/Makefile | 8 +
drivers/firmware/arm-ffa/arm-ffa-uclass.c | 1065 +++++++++++++++++
drivers/firmware/arm-ffa/arm-ffa.c | 104 ++
.../firmware/arm-ffa/sandbox_arm_ffa_priv.h | 14 +
include/arm_ffa.h | 213 ++++
include/arm_ffa_priv.h | 246 ++++
include/dm/uclass-id.h | 6 +
13 files changed, 1939 insertions(+)
create mode 100644 doc/arch/arm64.ffa.rst
create mode 100644 drivers/firmware/arm-ffa/Kconfig
create mode 100644 drivers/firmware/arm-ffa/Makefile
create mode 100644 drivers/firmware/arm-ffa/arm-ffa-uclass.c
create mode 100644 drivers/firmware/arm-ffa/arm-ffa.c
create mode 100644 drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h
create mode 100644 include/arm_ffa.h
create mode 100644 include/arm_ffa_priv.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4324965d26..4fd5768de0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -266,6 +266,14 @@ F: drivers/net/cortina_ni.h
F: drivers/net/phy/ca_phy.c
F: configs/cortina_presidio-asic-pnand_defconfig
+ARM FF-A
+M: Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+S: Maintained
+F: doc/arch/arm64.ffa.rst
+F: drivers/firmware/arm-ffa/
+F: include/arm_ffa.h
+F: include/sandbox_arm_ffa.h
+
ARM FREESCALE IMX
M: Stefano Babic <sbabic at denx.de>
M: Fabio Estevam <festevam at gmail.com>
diff --git a/doc/arch/arm64.ffa.rst b/doc/arch/arm64.ffa.rst
new file mode 100644
index 0000000000..df18948774
--- /dev/null
+++ b/doc/arch/arm64.ffa.rst
@@ -0,0 +1,236 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Arm FF-A Support
+================
+
+Summary
+-------
+
+FF-A stands for Firmware Framework for Arm A-profile processors.
+
+FF-A specifies interfaces that enable a pair of software execution environments aka partitions to
+communicate with each other. A partition could be a VM in the Normal or Secure world, an
+application in S-EL0, or a Trusted OS in S-EL1.
+
+The U-Boot FF-A support (the bus) implements the interfaces to communicate
+with partitions in the Secure world aka Secure partitions (SPs).
+
+The FF-A support specifically focuses on communicating with SPs that
+isolate portions of EFI runtime services that must run in a protected
+environment which is inaccessible by the Host OS or Hypervisor.
+Examples of such services are set/get variables.
+
+The FF-A support uses the SMC ABIs defined by the FF-A specification to:
+
+- Discover the presence of SPs of interest
+- Access an SP's service through communication protocols
+ e.g. EFI MM communication protocol
+
+At this stage of development only EFI boot-time services are supported.
+Runtime support will be added in future developments.
+
+The U-Boot FF-A support provides the following parts:
+
+- A Uclass driver providing generic FF-A methods.
+- An Arm FF-A device driver providing Arm-specific methods and reusing the Uclass methods.
+
+FF-A and SMC specifications
+-------------------------------------------
+
+The current implementation of the U-Boot FF-A support relies on
+`FF-A v1.0 specification`_ and uses SMC32 calling convention which
+means using the first 32-bit data of the Xn registers.
+
+At this stage we only need the FF-A v1.0 features.
+
+The FF-A support has been tested with OP-TEE which supports SMC32 calling
+convention.
+
+Hypervisors are supported if they are configured to trap SMC calls.
+
+The FF-A support uses 64-bit registers as per `SMC Calling Convention v1.2 specification`_.
+
+Supported hardware
+--------------------------------
+
+Aarch64 plaforms
+
+Configuration
+----------------------
+
+CONFIG_ARM_FFA_TRANSPORT
+ Enables the FF-A support. Turn this on if you want to use FF-A
+ communication.
+ When using an Arm 64-bit platform, the Arm FF-A driver will be used.
+
+FF-A ABIs under the hood
+---------------------------------------
+
+Invoking an FF-A ABI involves providing to the secure world/hypervisor the
+expected arguments from the ABI.
+
+On an Arm 64-bit platform, the ABI arguments are stored in x0 to x7 registers.
+Then, an SMC instruction is executed.
+
+At the secure side level or hypervisor the ABI is handled at a higher exception
+level and the arguments are read and processed.
+
+The response is put back through x0 to x7 registers and control is given back
+to the U-Boot Arm FF-A driver (non-secure world).
+
+The driver reads the response and processes it accordingly.
+
+This methodology applies to all the FF-A ABIs.
+
+FF-A bus discovery on Arm 64-bit platforms
+---------------------------------------------
+
+When CONFIG_ARM_FFA_TRANSPORT is enabled, the FF-A bus is considered as
+an architecture feature and discovered using ARM_SMCCC_FEATURES mechanism.
+This discovery mechanism is performed by the PSCI driver.
+
+The PSCI driver comes with a PSCI device tree node which is the root node for all
+architecture features including FF-A bus.
+
+::
+
+ => dm tree
+
+ Class Index Probed Driver Name
+ -----------------------------------------------------------
+ ...
+ firmware 0 [ + ] psci |-- psci
+ ffa 0 [ ] arm_ffa | `-- arm_ffa
+ ...
+
+The PSCI driver is bound to the PSCI device and when probed it tries to discover
+the architecture features by calling a callback the features drivers provide.
+
+In case of FF-A, the callback is arm_ffa_is_supported() which tries to discover the
+FF-A framework by querying the FF-A framework version from secure world using
+FFA_VERSION ABI. When discovery is successful, the ARM_SMCCC_FEATURES
+mechanism creates a U-Boot device for the FF-A bus and binds the Arm FF-A driver
+with the device using device_bind_driver().
+
+At this stage the FF-A bus is registered with the DM and can be interacted with using
+the DM APIs.
+
+Clients are able to probe then use the FF-A bus by calling uclass_first_device().
+
+When calling uclass_first_device(), the FF-A driver is probed and ends up calling
+ffa_do_probe() provided by the Uclass which does the following:
+
+ - saving the FF-A framework version in uc_priv
+ - querying from secure world the u-boot endpoint ID
+ - querying from secure world the supported features of FFA_RXTX_MAP
+ - mapping the RX/TX buffers
+ - querying from secure world all the partitions information
+
+When one of the above actions fails, probing fails and the driver stays not active
+and can be probed again if needed.
+
+Requirements for clients
+-------------------------------------
+
+When using the FF-A bus with EFI, clients must query the SPs they are looking for
+during EFI boot-time mode using the service UUID.
+
+The RX/TX buffers are only available at EFI boot-time. Querying partitions is
+done at boot time and data is cached for future use.
+
+RX/TX buffers should be unmapped before EFI runtime mode starts.
+The driver provides a bus operation for that called ffa_rxtx_unmap().
+
+The user should call ffa_rxtx_unmap() to unmap the RX/TX buffers when required
+(e.g: at efi_exit_boot_services()).
+
+The Linux kernel allocates its own RX/TX buffers. To be able to register these kernel buffers
+with secure world, the U-Boot's RX/TX buffers should be unmapped before EFI runtime starts.
+
+When invoking FF-A direct messaging, clients should specify which ABI protocol
+they want to use (32-bit vs 64-bit). Selecting the protocol means using
+the 32-bit or 64-bit version of FFA_MSG_SEND_DIRECT_{REQ, RESP}.
+The calling convention between U-Boot and the secure world stays the same: SMC32.
+
+Requirements for user drivers
+-------------------------------------
+
+Users who want to implement their custom FF-A device driver while reusing the FF-A Uclass can do so
+by implementing their own invoke_ffa_fn() in the user driver.
+
+The bus driver layer
+------------------------------
+
+FF-A support comes on top of the SMCCC layer and is implemented by the FF-A Uclass drivers/firmware/arm-ffa/arm-ffa-uclass.c
+
+The following features are provided:
+
+- Support for the 32-bit version of the following ABIs:
+
+ - FFA_VERSION
+ - FFA_ID_GET
+ - FFA_FEATURES
+ - FFA_PARTITION_INFO_GET
+ - FFA_RXTX_UNMAP
+ - FFA_RX_RELEASE
+ - FFA_RUN
+ - FFA_ERROR
+ - FFA_SUCCESS
+ - FFA_INTERRUPT
+ - FFA_MSG_SEND_DIRECT_REQ
+ - FFA_MSG_SEND_DIRECT_RESP
+
+- Support for the 64-bit version of the following ABIs:
+
+ - FFA_RXTX_MAP
+ - FFA_MSG_SEND_DIRECT_REQ
+ - FFA_MSG_SEND_DIRECT_RESP
+
+- Processing the received data from the secure world/hypervisor and caching it
+
+- Hiding from upper layers the FF-A protocol and registers details. Upper
+ layers focus on exchanged data, FF-A support takes care of how to transport
+ that to the secure world/hypervisor using FF-A
+
+- FF-A support provides driver operations to be used by upper layers:
+
+ - ffa_partition_info_get
+ - ffa_sync_send_receive
+ - ffa_rxtx_unmap
+
+- FF-A bus discovery makes sure FF-A framework is responsive and compatible
+ with the driver
+
+- FF-A bus can be compiled and used without EFI
+
+Example of boot logs with FF-A enabled
+--------------------------------------
+
+For example, when using FF-A with Corstone-1000 the logs are as follows:
+
+::
+
+ U-Boot 2023.01 (May 10 2023 - 11:08:07 +0000) corstone1000 aarch64
+
+ DRAM: 2 GiB
+ Arm FF-A framework discovery
+ FF-A driver 1.0
+ FF-A framework 1.0
+ FF-A versions are compatible
+ ...
+ FF-A driver 1.0
+ FF-A framework 1.0
+ FF-A versions are compatible
+ EFI: MM partition ID 0x8003
+ ...
+ EFI stub: Booting Linux Kernel...
+ ...
+ Linux version 6.1.9-yocto-standard (oe-user at oe-host) (aarch64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.202301193
+ Machine model: ARM Corstone1000 FPGA MPS3 board
+
+Contributors
+------------
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+
+.. _`FF-A v1.0 specification`: https://documentation-service.arm.com/static/5fb7e8a6ca04df4095c1d65e
+.. _`SMC Calling Convention v1.2 specification`: https://documentation-service.arm.com/static/5f8edaeff86e16515cdbe4c6
diff --git a/doc/arch/index.rst b/doc/arch/index.rst
index b8da4b8c8e..2f916f4026 100644
--- a/doc/arch/index.rst
+++ b/doc/arch/index.rst
@@ -8,6 +8,7 @@ Architecture-specific doc
arc
arm64
+ arm64.ffa
m68k
mips
nios2
diff --git a/drivers/Makefile b/drivers/Makefile
index 78dcf62f76..5044f45253 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -115,6 +115,7 @@ obj-y += iommu/
obj-y += smem/
obj-y += thermal/
obj-$(CONFIG_TEE) += tee/
+obj-$(CONFIG_ARM_FFA_TRANSPORT) += firmware/arm-ffa/
obj-y += axi/
obj-y += ufs/
obj-$(CONFIG_W1) += w1/
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index eae1c8ddc9..8789b1ea14 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -45,4 +45,5 @@ config ARM_SMCCC_FEATURES
the PSCI driver is always probed and binds dirvers registered to the Arm SMCCC
services if any and reported as supported by the SMCCC firmware.
+source "drivers/firmware/arm-ffa/Kconfig"
source "drivers/firmware/scmi/Kconfig"
diff --git a/drivers/firmware/arm-ffa/Kconfig b/drivers/firmware/arm-ffa/Kconfig
new file mode 100644
index 0000000000..9200c8028b
--- /dev/null
+++ b/drivers/firmware/arm-ffa/Kconfig
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config ARM_FFA_TRANSPORT
+ bool "Enable Arm Firmware Framework for Armv8-A driver"
+ depends on DM && ARM64
+ select ARM_SMCCC
+ select ARM_SMCCC_FEATURES
+ select LIB_UUID
+ select DEVRES
+ help
+ The Firmware Framework for Arm A-profile processors (FF-A)
+ describes interfaces (ABIs) that standardize communication
+ between the Secure World and Normal World leveraging TrustZone
+ technology.
+
+ The FF-A support in U-Boot is based on FF-A specification v1.0 and uses SMC32
+ calling convention.
+
+ FF-A specification:
+
+ https://developer.arm.com/documentation/den0077/a/?lang=en
+
+ In U-Boot FF-A design, FF-A is considered as a discoverable bus.
+ FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
+ by the PSCI driver.
+ The Secure World is considered as one entity to communicate with
+ using the FF-A bus.
+ FF-A communication is handled by one device and one instance (the bus).
+ The FF-A support on U-Boot takes care of all the interactions between Normal
+ world and Secure World.
+
+ Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
+ Arm specific methods are implemented in the Arm driver (arm-ffa.c).
+
+ For more details about the FF-A support, please refer to doc/arch/arm64.ffa.rst
+
diff --git a/drivers/firmware/arm-ffa/Makefile b/drivers/firmware/arm-ffa/Makefile
new file mode 100644
index 0000000000..11b1766285
--- /dev/null
+++ b/drivers/firmware/arm-ffa/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+#
+# Authors:
+# Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+
+obj-y += arm-ffa-uclass.o arm-ffa.o
diff --git a/drivers/firmware/arm-ffa/arm-ffa-uclass.c b/drivers/firmware/arm-ffa/arm-ffa-uclass.c
new file mode 100644
index 0000000000..ffa9d81fa7
--- /dev/null
+++ b/drivers/firmware/arm-ffa/arm-ffa-uclass.c
@@ -0,0 +1,1065 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ */
+#include <common.h>
+#include <arm_ffa.h>
+#include <arm_ffa_priv.h>
+#include <dm.h>
+#include <log.h>
+#include <malloc.h>
+#include <string.h>
+#include <uuid.h>
+#include <asm/global_data.h>
+#include <dm/device-internal.h>
+#include <dm/devres.h>
+#include <dm/root.h>
+#include <linux/errno.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Error mapping declarations */
+
+int ffa_to_std_errmap[MAX_NUMBER_FFA_ERR] = {
+ [NOT_SUPPORTED] = -EOPNOTSUPP,
+ [INVALID_PARAMETERS] = -EINVAL,
+ [NO_MEMORY] = -ENOMEM,
+ [BUSY] = -EBUSY,
+ [INTERRUPTED] = -EINTR,
+ [DENIED] = -EACCES,
+ [RETRY] = -EAGAIN,
+ [ABORTED] = -ECANCELED,
+};
+
+static struct ffa_abi_errmap err_msg_map[FFA_ERRMAP_COUNT] = {
+ [FFA_ID_TO_ERRMAP_ID(FFA_VERSION)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: A Firmware Framework implementation does not exist",
+ },
+ },
+ [FFA_ID_TO_ERRMAP_ID(FFA_ID_GET)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: This function is not implemented at this FF-A instance",
+ },
+ },
+ [FFA_ID_TO_ERRMAP_ID(FFA_FEATURES)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: FFA_RXTX_MAP is not implemented at this FF-A instance",
+ },
+ },
+ [FFA_ID_TO_ERRMAP_ID(FFA_PARTITION_INFO_GET)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: This function is not implemented at this FF-A instance",
+ [INVALID_PARAMETERS] =
+ "INVALID_PARAMETERS: Unrecognized UUID",
+ [NO_MEMORY] =
+ "NO_MEMORY: Results cannot fit in RX buffer of the caller",
+ [BUSY] =
+ "BUSY: RX buffer of the caller is not free",
+ [DENIED] =
+ "DENIED: Callee is not in a state to handle this request",
+ },
+ },
+ [FFA_ID_TO_ERRMAP_ID(FFA_RXTX_UNMAP)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: FFA_RXTX_UNMAP is not implemented at this FF-A instance",
+ [INVALID_PARAMETERS] =
+ "INVALID_PARAMETERS: No buffer pair registered on behalf of the caller",
+ },
+ },
+ [FFA_ID_TO_ERRMAP_ID(FFA_RX_RELEASE)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: FFA_RX_RELEASE is not implemented at this FF-A instance",
+ [DENIED] =
+ "DENIED: Caller did not have ownership of the RX buffer",
+ },
+ },
+ [FFA_ID_TO_ERRMAP_ID(FFA_RXTX_MAP)] = {
+ {
+ [NOT_SUPPORTED] =
+ "NOT_SUPPORTED: This function is not implemented at this FF-A instance",
+ [INVALID_PARAMETERS] =
+ "INVALID_PARAMETERS: Field(s) in input parameters incorrectly encoded",
+ [NO_MEMORY] =
+ "NO_MEMORY: Not enough memory",
+ [DENIED] =
+ "DENIED: Buffer pair already registered",
+ },
+ },
+};
+
+/**
+ * ffa_to_std_errno() - convert FF-A error code to standard error code
+ * @ffa_errno: Error code returned by the FF-A ABI
+ *
+ * Map the given FF-A error code as specified
+ * by the spec to a u-boot standard error code.
+ *
+ * Return:
+ *
+ * The standard error code on success. . Otherwise, failure
+ */
+static int ffa_to_std_errno(int ffa_errno)
+{
+ int err_idx = -ffa_errno;
+
+ /* Map the FF-A error code to the standard u-boot error code */
+ if (err_idx > 0 && err_idx < MAX_NUMBER_FFA_ERR)
+ return ffa_to_std_errmap[err_idx];
+ return -EINVAL;
+}
+
+/**
+ * ffa_print_error_log() - print the error log corresponding to the selected FF-A ABI
+ * @ffa_id: FF-A ABI ID
+ * @ffa_errno: Error code returned by the FF-A ABI
+ *
+ * Map the FF-A error code to the error log relevant to the
+ * selected FF-A ABI. Then the error log is printed.
+ *
+ * Return:
+ *
+ * 0 on success. . Otherwise, failure
+ */
+static int ffa_print_error_log(u32 ffa_id, int ffa_errno)
+{
+ int err_idx = -ffa_errno, abi_idx = 0;
+
+ /* Map the FF-A error code to the corresponding error log */
+
+ if (err_idx <= 0 || err_idx >= MAX_NUMBER_FFA_ERR)
+ return -EINVAL;
+
+ if (ffa_id < FFA_FIRST_ID || ffa_id > FFA_LAST_ID)
+ return -EINVAL;
+
+ abi_idx = FFA_ID_TO_ERRMAP_ID(ffa_id);
+ if (abi_idx < 0 || abi_idx >= FFA_ERRMAP_COUNT)
+ return -EINVAL;
+
+ if (!err_msg_map[abi_idx].err_str[err_idx])
+ return -EINVAL;
+
+ log_err("%s\n", err_msg_map[abi_idx].err_str[err_idx]);
+
+ return 0;
+}
+
+/* FF-A ABIs implementation (U-Boot side) */
+
+/**
+ * invoke_ffa_fn() - SMC wrapper
+ * @args: FF-A ABI arguments to be copied to Xn registers
+ * @res: FF-A ABI return data to be copied from Xn registers
+ *
+ * Calls low level SMC implementation.
+ * This function should be implemented by the user driver.
+ */
+void __weak invoke_ffa_fn(ffa_value_t args, ffa_value_t *res)
+{
+}
+
+/**
+ * ffa_get_version_hdlr() - FFA_VERSION handler function
+ * @dev: The FF-A bus device
+ *
+ * Implement FFA_VERSION FF-A function
+ * to get from the secure world the FF-A framework version
+ * FFA_VERSION is used to discover the FF-A framework.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_get_version_hdlr(struct udevice *dev)
+{
+ u16 major, minor;
+ ffa_value_t res = {0};
+ int ffa_errno;
+ struct ffa_priv *uc_priv;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_VERSION), .a1 = FFA_VERSION_1_0,
+ }, &res);
+
+ ffa_errno = res.a0;
+ if (ffa_errno < 0) {
+ ffa_print_error_log(FFA_VERSION, ffa_errno);
+ return ffa_to_std_errno(ffa_errno);
+ }
+
+ major = GET_FFA_MAJOR_VERSION(res.a0);
+ minor = GET_FFA_MINOR_VERSION(res.a0);
+
+ log_info("FF-A driver %d.%d\nFF-A framework %d.%d\n",
+ FFA_MAJOR_VERSION, FFA_MINOR_VERSION, major, minor);
+
+ if (major == FFA_MAJOR_VERSION && minor >= FFA_MINOR_VERSION) {
+ log_info("FF-A versions are compatible\n");
+
+ if (dev) {
+ uc_priv = dev_get_uclass_priv(dev);
+ if (uc_priv)
+ uc_priv->fwk_version = res.a0;
+ }
+
+ return 0;
+ }
+
+ log_err("versions are incompatible\nExpected: %d.%d , Found: %d.%d\n",
+ FFA_MAJOR_VERSION, FFA_MINOR_VERSION, major, minor);
+
+ return -EPROTONOSUPPORT;
+}
+
+/**
+ * ffa_get_endpoint_id() - FFA_ID_GET handler function
+ * @dev: The FF-A bus device
+ *
+ * Implement FFA_ID_GET FF-A function
+ * to get from the secure world u-boot endpoint ID
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_get_endpoint_id(struct udevice *dev)
+{
+ ffa_value_t res = {0};
+ int ffa_errno;
+ struct ffa_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_ID_GET),
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) {
+ uc_priv->id = GET_SELF_ENDPOINT_ID((u32)res.a2);
+ log_debug("FF-A endpoint ID is %u\n", uc_priv->id);
+
+ return 0;
+ }
+
+ ffa_errno = res.a2;
+
+ ffa_print_error_log(FFA_ID_GET, ffa_errno);
+
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/**
+ * ffa_set_rxtx_buffers_pages_cnt() - set the minimum number of pages in each of the RX/TX buffers
+ * @dev: The FF-A bus device
+ * @prop_field: properties field obtained from FFA_FEATURES ABI
+ *
+ * Set the minimum number of pages in each of the RX/TX buffers in uc_priv
+ *
+ * Return:
+ *
+ * rxtx_min_pages field contains the returned number of pages
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_set_rxtx_buffers_pages_cnt(struct udevice *dev, u32 prop_field)
+{
+ struct ffa_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ switch (prop_field) {
+ case RXTX_4K:
+ uc_priv->pair.rxtx_min_pages = 1;
+ break;
+ case RXTX_16K:
+ uc_priv->pair.rxtx_min_pages = 4;
+ break;
+ case RXTX_64K:
+ uc_priv->pair.rxtx_min_pages = 16;
+ break;
+ default:
+ log_err("RX/TX buffer size not supported\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * ffa_get_rxtx_map_features_hdlr() - FFA_FEATURES handler function with FFA_RXTX_MAP argument
+ * @dev: The FF-A bus device
+ *
+ * Implement FFA_FEATURES FF-A function to retrieve the FFA_RXTX_MAP features
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_get_rxtx_map_features_hdlr(struct udevice *dev)
+{
+ ffa_value_t res = {0};
+ int ffa_errno;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_FEATURES),
+ .a1 = FFA_SMC_64(FFA_RXTX_MAP),
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS))
+ return ffa_set_rxtx_buffers_pages_cnt(dev, res.a2);
+
+ ffa_errno = res.a2;
+ ffa_print_error_log(FFA_FEATURES, ffa_errno);
+
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/**
+ * ffa_free_rxtx_buffers() - free the RX/TX buffers
+ * @dev: The FF-A bus device
+ *
+ * Free the RX/TX buffers
+ */
+static void ffa_free_rxtx_buffers(struct udevice *dev)
+{
+ struct ffa_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ log_debug("Freeing FF-A RX/TX buffers\n");
+
+ if (uc_priv->pair.rxbuf) {
+ free(uc_priv->pair.rxbuf);
+ uc_priv->pair.rxbuf = NULL;
+ }
+
+ if (uc_priv->pair.txbuf) {
+ free(uc_priv->pair.txbuf);
+ uc_priv->pair.txbuf = NULL;
+ }
+}
+
+/**
+ * ffa_alloc_rxtx_buffers() - allocate the RX/TX buffers
+ * @dev: The FF-A bus device
+ *
+ * Used by ffa_map_rxtx_buffers to allocate
+ * the RX/TX buffers before mapping them. The allocated memory is physically
+ * contiguous since memalign ends up calling malloc which allocates
+ * contiguous memory in u-boot.
+ * The size of the memory allocated is the minimum allowed.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_alloc_rxtx_buffers(struct udevice *dev)
+{
+ u64 bytes;
+ struct ffa_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ log_debug("Using %lu 4KB page(s) for FF-A RX/TX buffers size\n",
+ uc_priv->pair.rxtx_min_pages);
+
+ bytes = uc_priv->pair.rxtx_min_pages * SZ_4K;
+
+ /*
+ * The alignment of the RX and TX buffers must be equal
+ * to the larger translation granule size
+ * Assumption: Memory allocated with memalign is always physically contiguous
+ */
+
+ uc_priv->pair.rxbuf = memalign(bytes, bytes);
+ if (!uc_priv->pair.rxbuf) {
+ log_err("failure to allocate RX buffer\n");
+ return -ENOBUFS;
+ }
+
+ log_debug("FF-A RX buffer at virtual address %p\n", uc_priv->pair.rxbuf);
+
+ uc_priv->pair.txbuf = memalign(bytes, bytes);
+ if (!uc_priv->pair.txbuf) {
+ free(uc_priv->pair.rxbuf);
+ uc_priv->pair.rxbuf = NULL;
+ log_err("failure to allocate the TX buffer\n");
+ return -ENOBUFS;
+ }
+
+ log_debug("FF-A TX buffer at virtual address %p\n", uc_priv->pair.txbuf);
+
+ /* Make sure the buffers are cleared before use */
+ memset(uc_priv->pair.rxbuf, 0, bytes);
+ memset(uc_priv->pair.txbuf, 0, bytes);
+
+ return 0;
+}
+
+/**
+ * ffa_map_rxtx_buffers_hdlr() - FFA_RXTX_MAP handler function
+ * @dev: The FF-A bus device
+ *
+ * Implement FFA_RXTX_MAP FF-A function to map the RX/TX buffers
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_map_rxtx_buffers_hdlr(struct udevice *dev)
+{
+ int ret;
+ ffa_value_t res = {0};
+ int ffa_errno;
+ struct ffa_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ ret = ffa_alloc_rxtx_buffers(dev);
+ if (ret)
+ return ret;
+
+ /*
+ * we need to pass the physical addresses of the RX/TX buffers
+ * in u-boot physical/virtual mapping is 1:1
+ * no need to convert from virtual to physical
+ */
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_64(FFA_RXTX_MAP),
+ .a1 = map_to_sysmem(uc_priv->pair.txbuf),
+ .a2 = map_to_sysmem(uc_priv->pair.rxbuf),
+ .a3 = uc_priv->pair.rxtx_min_pages,
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) {
+ log_debug("FF-A RX/TX buffers mapped\n");
+ return 0;
+ }
+
+ ffa_errno = res.a2;
+ ffa_print_error_log(FFA_RXTX_MAP, ffa_errno);
+
+ ffa_free_rxtx_buffers(dev);
+
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/**
+ * ffa_unmap_rxtx_buffers_hdlr() - FFA_RXTX_UNMAP handler function
+ * @dev: The FF-A bus device
+ *
+ * Implement FFA_RXTX_UNMAP FF-A function to unmap the RX/TX buffers
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_unmap_rxtx_buffers_hdlr(struct udevice *dev)
+{
+ ffa_value_t res = {0};
+ int ffa_errno;
+ struct ffa_priv *uc_priv;
+
+ log_debug("unmapping FF-A RX/TX buffers\n");
+
+ uc_priv = dev_get_uclass_priv(dev);
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_RXTX_UNMAP),
+ .a1 = PREP_SELF_ENDPOINT_ID(uc_priv->id),
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) {
+ ffa_free_rxtx_buffers(dev);
+ return 0;
+ }
+
+ ffa_errno = res.a2;
+ ffa_print_error_log(FFA_RXTX_UNMAP, ffa_errno);
+
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/**
+ * ffa_release_rx_buffer_hdlr() - FFA_RX_RELEASE handler function
+ * @dev: The FF-A bus device
+ *
+ * Invoke FFA_RX_RELEASE FF-A function to release the ownership of the RX buffer
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_release_rx_buffer_hdlr(struct udevice *dev)
+{
+ ffa_value_t res = {0};
+ int ffa_errno;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_RX_RELEASE),
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS))
+ return 0;
+
+ ffa_errno = res.a2;
+ ffa_print_error_log(FFA_RX_RELEASE, ffa_errno);
+
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/**
+ * ffa_uuid_are_identical() - check whether two given UUIDs are identical
+ * @uuid1: first UUID
+ * @uuid2: second UUID
+ *
+ * Used by ffa_read_partitions_info to search for a UUID in the partitions descriptors table
+ *
+ * Return:
+ *
+ * 1 when UUIDs match. Otherwise, 0
+ */
+static bool ffa_uuid_are_identical(const struct ffa_partition_uuid *uuid1,
+ const struct ffa_partition_uuid *uuid2)
+{
+ if (!uuid1 || !uuid2)
+ return 0;
+
+ return !memcmp(uuid1, uuid2, sizeof(struct ffa_partition_uuid));
+}
+
+/**
+ * ffa_read_partitions_info() - read queried partition data
+ * @dev: The FF-A bus device
+ * @count: The number of partitions queried
+ * @part_uuid: Pointer to the partition(s) UUID
+ *
+ * Read the partitions information returned by the FFA_PARTITION_INFO_GET and saves it in uc_priv
+ *
+ * Return:
+ *
+ * uc_priv is updated with the partition(s) information
+ * 0 is returned on success. Otherwise, failure
+ */
+static int ffa_read_partitions_info(struct udevice *dev, u32 count,
+ struct ffa_partition_uuid *part_uuid)
+{
+ struct ffa_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ if (!count) {
+ log_err("no partition detected\n");
+ return -ENODATA;
+ }
+
+ log_debug("Reading FF-A partitions data from the RX buffer\n");
+
+ if (!part_uuid) {
+ /* Querying information of all partitions */
+ u64 buf_bytes;
+ u64 data_bytes;
+ u32 desc_idx;
+ struct ffa_partition_info *parts_info;
+
+ data_bytes = count * sizeof(struct ffa_partition_desc);
+
+ buf_bytes = uc_priv->pair.rxtx_min_pages * SZ_4K;
+
+ if (data_bytes > buf_bytes) {
+ log_err("partitions data size exceeds the RX buffer size:\n");
+ log_err(" sizes in bytes: data %llu , RX buffer %llu\n",
+ data_bytes,
+ buf_bytes);
+
+ return -ENOMEM;
+ }
+
+ uc_priv->partitions.descs = devm_kmalloc(dev, data_bytes, __GFP_ZERO);
+ if (!uc_priv->partitions.descs) {
+ log_err("cannot allocate partitions data buffer\n");
+ return -ENOMEM;
+ }
+
+ parts_info = uc_priv->pair.rxbuf;
+
+ for (desc_idx = 0 ; desc_idx < count ; desc_idx++) {
+ uc_priv->partitions.descs[desc_idx].info =
+ parts_info[desc_idx];
+
+ log_debug("FF-A partition ID %x : info cached\n",
+ uc_priv->partitions.descs[desc_idx].info.id);
+ }
+
+ uc_priv->partitions.count = count;
+
+ log_debug("%d FF-A partition(s) found and cached\n", count);
+
+ } else {
+ u32 rx_desc_idx, cached_desc_idx;
+ struct ffa_partition_info *parts_info;
+ u8 desc_found;
+
+ parts_info = uc_priv->pair.rxbuf;
+
+ /*
+ * Search for the SP IDs read from the RX buffer
+ * in the already cached SPs.
+ * Update the UUID when ID found.
+ */
+ for (rx_desc_idx = 0; rx_desc_idx < count ; rx_desc_idx++) {
+ desc_found = 0;
+
+ /* Search the current ID in the cached partitions */
+ for (cached_desc_idx = 0;
+ cached_desc_idx < uc_priv->partitions.count;
+ cached_desc_idx++) {
+ /* Save the UUID */
+ if (uc_priv->partitions.descs[cached_desc_idx].info.id ==
+ parts_info[rx_desc_idx].id) {
+ uc_priv->partitions.descs[cached_desc_idx].sp_uuid =
+ *part_uuid;
+
+ desc_found = 1;
+ break;
+ }
+ }
+
+ if (!desc_found)
+ return -ENODATA;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ffa_query_partitions_info() - invoke FFA_PARTITION_INFO_GET and save partitions data
+ * @dev: The FF-A bus device
+ * @part_uuid: Pointer to the partition(s) UUID
+ * @pcount: Pointer to the number of partitions variable filled when querying
+ *
+ * Execute the FFA_PARTITION_INFO_GET to query the partitions data.
+ * Then, call ffa_read_partitions_info to save the data in uc_priv.
+ *
+ * After reading the data the RX buffer is released using ffa_release_rx_buffer
+ *
+ * Return:
+ *
+ * When part_uuid is NULL, all partitions data are retrieved from secure world
+ * When part_uuid is non NULL, data for partitions matching the given UUID are
+ * retrieved and the number of partitions is returned
+ * 0 is returned on success. Otherwise, failure
+ */
+static int ffa_query_partitions_info(struct udevice *dev, struct ffa_partition_uuid *part_uuid,
+ u32 *pcount)
+{
+ struct ffa_partition_uuid query_uuid = {0};
+ ffa_value_t res = {0};
+ int ffa_errno;
+
+ /*
+ * If a UUID is specified. Information for one or more
+ * partitions in the system is queried. Otherwise, information
+ * for all installed partitions is queried
+ */
+
+ if (part_uuid) {
+ if (!pcount)
+ return -EINVAL;
+
+ query_uuid = *part_uuid;
+ } else if (pcount) {
+ return -EINVAL;
+ }
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_PARTITION_INFO_GET),
+ .a1 = query_uuid.a1,
+ .a2 = query_uuid.a2,
+ .a3 = query_uuid.a3,
+ .a4 = query_uuid.a4,
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) {
+ int ret;
+
+ /*
+ * res.a2 contains the count of partition information descriptors
+ * populated in the RX buffer
+ */
+ if (res.a2) {
+ ret = ffa_read_partitions_info(dev, (u32)res.a2, part_uuid);
+ if (ret) {
+ log_err("failed reading SP(s) data , err (%d)\n", ret);
+ ffa_release_rx_buffer_hdlr(dev);
+ return -EINVAL;
+ }
+ }
+
+ /* Return the SP count (when querying using a UUID) */
+ if (pcount)
+ *pcount = (u32)res.a2;
+
+ /*
+ * After calling FFA_PARTITION_INFO_GET the buffer ownership
+ * is assigned to the consumer (u-boot). So, we need to give
+ * the ownership back to the SPM or hypervisor
+ */
+ ret = ffa_release_rx_buffer_hdlr(dev);
+
+ return ret;
+ }
+
+ ffa_errno = res.a2;
+ ffa_print_error_log(FFA_PARTITION_INFO_GET, ffa_errno);
+
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/**
+ * ffa_get_partitions_info_hdlr() - FFA_PARTITION_INFO_GET handler function
+ * @uuid_str: pointer to the UUID string
+ * @sp_count: address of the variable containing the number of partitions matching the UUID
+ * The variable is set by the driver
+ * @sp_descs: address of the descriptors of the partitions matching the UUID
+ * The address is set by the driver
+ *
+ * Return the number of partitions and their descriptors matching the UUID
+ *
+ * Query the secure partition data from uc_priv.
+ * If not found, invoke FFA_PARTITION_INFO_GET FF-A function to query the partition information
+ * from secure world.
+ *
+ * A client of the FF-A driver should know the UUID of the service it wants to
+ * access. It should use the UUID to request the FF-A driver to provide the
+ * partition(s) information of the service. The FF-A driver uses
+ * PARTITION_INFO_GET to obtain this information. This is implemented through
+ * ffa_get_partitions_info_hdlr() function.
+ * If the partition(s) matching the UUID found, the partition(s) information and the
+ * number are returned.
+ * If no partition matching the UUID is found in the cached area, a new FFA_PARTITION_INFO_GET
+ * call is issued.
+ * If not done yet, the UUID is updated in the cached area.
+ * This assumes that partitions data does not change in the secure world.
+ * Otherwise u-boot will have an outdated partition data. The benefit of caching
+ * the information in the FF-A driver is to accommodate discovery after
+ * ExitBootServices().
+ *
+ * Return:
+ *
+ * @sp_count: the number of partitions
+ * @sp_descs: address of the partitions descriptors
+ *
+ * On success 0 is returned. Otherwise, failure
+ */
+int ffa_get_partitions_info_hdlr(struct udevice *dev, const char *uuid_str,
+ u32 *sp_count, struct ffa_partition_desc **sp_descs)
+{
+ u32 i;
+ struct ffa_partition_uuid part_uuid = {0};
+ struct ffa_priv *uc_priv;
+ struct ffa_partition_desc *rx_descs;
+
+ uc_priv = dev_get_uclass_priv(dev);
+
+ if (!uc_priv->partitions.count || !uc_priv->partitions.descs) {
+ log_err("no partition installed\n");
+ return -EINVAL;
+ }
+
+ if (!uuid_str) {
+ log_err("no UUID provided\n");
+ return -EINVAL;
+ }
+
+ if (!sp_count) {
+ log_err("no count argument provided\n");
+ return -EINVAL;
+ }
+
+ if (!sp_descs) {
+ log_err("no info argument provided\n");
+ return -EINVAL;
+ }
+
+ if (uuid_str_to_le_bin(uuid_str, (unsigned char *)&part_uuid)) {
+ log_err("invalid UUID\n");
+ return -EINVAL;
+ }
+
+ log_debug("Searching FF-A partitions using the provided UUID\n");
+
+ *sp_count = 0;
+ *sp_descs = uc_priv->pair.rxbuf;
+ rx_descs = *sp_descs;
+
+ /* Search in the cached partitions */
+ for (i = 0; i < uc_priv->partitions.count; i++)
+ if (ffa_uuid_are_identical(&uc_priv->partitions.descs[i].sp_uuid,
+ &part_uuid)) {
+ log_debug("FF-A partition ID %x matches the provided UUID\n",
+ uc_priv->partitions.descs[i].info.id);
+
+ (*sp_count)++;
+ *rx_descs++ = uc_priv->partitions.descs[i];
+ }
+
+ if (!(*sp_count)) {
+ int ret;
+
+ log_debug("No FF-A partition found. Querying framework ...\n");
+
+ ret = ffa_query_partitions_info(dev, &part_uuid, sp_count);
+
+ if (!ret) {
+ log_debug("Number of FF-A partition(s) matching the UUID: %d\n", *sp_count);
+
+ if (*sp_count)
+ ret = ffa_get_partitions_info_hdlr(dev, uuid_str, sp_count,
+ sp_descs);
+ else
+ ret = -ENODATA;
+ }
+
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ffa_cache_partitions_info() - Query and saves all secure partitions data
+ * @dev: The FF-A bus device
+ *
+ * Invoke FFA_PARTITION_INFO_GET FF-A function to query from secure world
+ * all partitions information.
+ *
+ * The FFA_PARTITION_INFO_GET call is issued with nil UUID as an argument.
+ * All installed partitions information are returned. We cache them in uc_priv
+ * and we keep the UUID field empty (in FF-A 1.0 UUID is not provided by the partition descriptor)
+ *
+ * Called at the device probing level.
+ * ffa_cache_partitions_info uses ffa_query_partitions_info to get the data
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_cache_partitions_info(struct udevice *dev)
+{
+ return ffa_query_partitions_info(dev, NULL, NULL);
+}
+
+/**
+ * ffa_msg_send_direct_req_hdlr() - FFA_MSG_SEND_DIRECT_{REQ,RESP} handler function
+ * @dev: The FF-A bus device
+ * @dst_part_id: destination partition ID
+ * @msg: pointer to the message data preallocated by the client (in/out)
+ * @is_smc64: select 64-bit or 32-bit FF-A ABI
+ *
+ * Implement FFA_MSG_SEND_DIRECT_{REQ,RESP}
+ * FF-A functions.
+ *
+ * FFA_MSG_SEND_DIRECT_REQ is used to send the data to the secure partition.
+ * The response from the secure partition is handled by reading the
+ * FFA_MSG_SEND_DIRECT_RESP arguments.
+ *
+ * The maximum size of the data that can be exchanged is 40 bytes which is
+ * sizeof(struct ffa_send_direct_data) as defined by the FF-A specification 1.0
+ * in the section relevant to FFA_MSG_SEND_DIRECT_{REQ,RESP}
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_msg_send_direct_req_hdlr(struct udevice *dev, u16 dst_part_id,
+ struct ffa_send_direct_data *msg, bool is_smc64)
+{
+ ffa_value_t res = {0};
+ int ffa_errno;
+ u64 req_mode, resp_mode;
+ struct ffa_priv *uc_priv;
+
+ uc_priv = dev_get_uclass_priv(dev);
+
+ /* No partition installed */
+ if (!uc_priv->partitions.count || !uc_priv->partitions.descs)
+ return -ENODEV;
+
+ if (is_smc64) {
+ req_mode = FFA_SMC_64(FFA_MSG_SEND_DIRECT_REQ);
+ resp_mode = FFA_SMC_64(FFA_MSG_SEND_DIRECT_RESP);
+ } else {
+ req_mode = FFA_SMC_32(FFA_MSG_SEND_DIRECT_REQ);
+ resp_mode = FFA_SMC_32(FFA_MSG_SEND_DIRECT_RESP);
+ }
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = req_mode,
+ .a1 = PREP_SELF_ENDPOINT_ID(uc_priv->id) |
+ PREP_PART_ENDPOINT_ID(dst_part_id),
+ .a2 = 0,
+ .a3 = msg->data0,
+ .a4 = msg->data1,
+ .a5 = msg->data2,
+ .a6 = msg->data3,
+ .a7 = msg->data4,
+ }, &res);
+
+ while (res.a0 == FFA_SMC_32(FFA_INTERRUPT))
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_SMC_32(FFA_RUN),
+ .a1 = res.a1,
+ }, &res);
+
+ if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) {
+ /* Message sent with no response */
+ return 0;
+ }
+
+ if (res.a0 == resp_mode) {
+ /* Message sent with response extract the return data */
+ msg->data0 = res.a3;
+ msg->data1 = res.a4;
+ msg->data2 = res.a5;
+ msg->data3 = res.a6;
+ msg->data4 = res.a7;
+
+ return 0;
+ }
+
+ ffa_errno = res.a2;
+ return ffa_to_std_errno(ffa_errno);
+}
+
+/* FF-A driver operations (used by clients for communicating with FF-A)*/
+
+/**
+ * ffa_partition_info_get() - FFA_PARTITION_INFO_GET driver operation
+ * @uuid_str: pointer to the UUID string
+ * @sp_count: address of the variable containing the number of partitions matching the UUID
+ * The variable is set by the driver
+ * @sp_descs: address of the descriptors of the partitions matching the UUID
+ * The address is set by the driver
+ *
+ * Driver operation for FFA_PARTITION_INFO_GET.
+ * Please see ffa_get_partitions_info_hdlr() description for more details.
+ *
+ * Return:
+ *
+ * @sp_count: the number of partitions
+ * @sp_descs: address of the partitions descriptors
+ *
+ * On success 0 is returned. Otherwise, failure
+ */
+int ffa_partition_info_get(struct udevice *dev, const char *uuid_str,
+ u32 *sp_count, struct ffa_partition_desc **sp_descs)
+{
+ struct ffa_bus_ops *ops = ffa_get_ops(dev);
+
+ if (!ops->partition_info_get)
+ return -ENOSYS;
+
+ return ops->partition_info_get(dev, uuid_str, sp_count, sp_descs);
+}
+
+/**
+ * ffa_sync_send_receive() - FFA_MSG_SEND_DIRECT_{REQ,RESP} driver operation
+ * @dev: The FF-A bus device
+ * @dst_part_id: destination partition ID
+ * @msg: pointer to the message data preallocated by the client (in/out)
+ * @is_smc64: select 64-bit or 32-bit FF-A ABI
+ *
+ * Driver operation for FFA_MSG_SEND_DIRECT_{REQ,RESP}.
+ * Please see ffa_msg_send_direct_req_hdlr() description for more details.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_sync_send_receive(struct udevice *dev, u16 dst_part_id,
+ struct ffa_send_direct_data *msg, bool is_smc64)
+{
+ struct ffa_bus_ops *ops = ffa_get_ops(dev);
+
+ if (!ops->sync_send_receive)
+ return -ENOSYS;
+
+ return ops->sync_send_receive(dev, dst_part_id, msg, is_smc64);
+}
+
+/**
+ * ffa_rxtx_unmap() - FFA_RXTX_UNMAP driver operation
+ * @dev: The FF-A bus device
+ *
+ * Driver operation for FFA_RXTX_UNMAP.
+ * Please see ffa_unmap_rxtx_buffers_hdlr() description for more details.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_rxtx_unmap(struct udevice *dev)
+{
+ struct ffa_bus_ops *ops = ffa_get_ops(dev);
+
+ if (!ops->rxtx_unmap)
+ return -ENOSYS;
+
+ return ops->rxtx_unmap(dev);
+}
+
+/**
+ * ffa_do_probe() - probing FF-A framework
+ * @dev: the FF-A bus device (arm_ffa)
+ *
+ * Probing is triggered on demand by clients searching for the uclass.
+ * At probe level the following actions are done:
+ * - saving the FF-A framework version in uc_priv
+ * - querying from secure world the u-boot endpoint ID
+ * - querying from secure world the supported features of FFA_RXTX_MAP
+ * - mapping the RX/TX buffers
+ * - querying from secure world all the partitions information
+ *
+ * All data queried from secure world is saved in uc_priv.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int ffa_do_probe(struct udevice *dev)
+{
+ int ret;
+
+ ret = ffa_get_version_hdlr(dev);
+ if (ret)
+ return ret;
+
+ ret = ffa_get_endpoint_id(dev);
+ if (ret)
+ return ret;
+
+ ret = ffa_get_rxtx_map_features_hdlr(dev);
+ if (ret)
+ return ret;
+
+ ret = ffa_map_rxtx_buffers_hdlr(dev);
+ if (ret)
+ return ret;
+
+ ret = ffa_cache_partitions_info(dev);
+ if (ret) {
+ ffa_unmap_rxtx_buffers_hdlr(dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+UCLASS_DRIVER(ffa) = {
+ .name = "ffa",
+ .id = UCLASS_FFA,
+ .pre_probe = ffa_do_probe,
+ .pre_remove = ffa_unmap_rxtx_buffers_hdlr,
+ .per_device_auto = sizeof(struct ffa_priv)
+};
diff --git a/drivers/firmware/arm-ffa/arm-ffa.c b/drivers/firmware/arm-ffa/arm-ffa.c
new file mode 100644
index 0000000000..68df75bd9e
--- /dev/null
+++ b/drivers/firmware/arm-ffa/arm-ffa.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ */
+
+#include <common.h>
+#include <arm_ffa.h>
+#include <arm_ffa_priv.h>
+#include <dm.h>
+#include <log.h>
+#include <asm/global_data.h>
+#include <dm/device-internal.h>
+#include <linux/errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * invoke_ffa_fn() - SMC wrapper
+ * @args: FF-A ABI arguments to be copied to Xn registers
+ * @res: FF-A ABI return data to be copied from Xn registers
+ *
+ * Calls low level SMC assembly function
+ */
+void invoke_ffa_fn(ffa_value_t args, ffa_value_t *res)
+{
+ arm_smccc_1_2_smc(&args, res);
+}
+
+/**
+ * arm_ffa_discover() - perform FF-A discovery
+ * @dev: The Arm FF-A bus device (arm_ffa)
+ * Try to discover the FF-A framework. Discovery is performed by
+ * querying the FF-A framework version from secure world using the FFA_VERSION ABI.
+ * Return:
+ *
+ * true on success. Otherwise, false.
+ */
+static bool arm_ffa_discover(struct udevice *dev)
+{
+ int ret;
+
+ log_info("Arm FF-A framework discovery\n");
+
+ ret = ffa_get_version_hdlr(dev);
+ if (ret)
+ return false;
+
+ return true;
+}
+
+/**
+ * arm_ffa_is_supported() - FF-A bus discovery callback
+ * @invoke_fn: legacy SMC invoke function (not used)
+ *
+ * Perform FF-A discovery by calling arm_ffa_discover().
+ * Discovery is performed by querying the FF-A framework version from
+ * secure world using the FFA_VERSION ABI.
+ *
+ * The FF-A driver is registered as an SMCCC feature driver. So, features discovery
+ * callbacks are called by the PSCI driver (PSCI device is the SMCCC features
+ * root device).
+ *
+ * The FF-A driver supports the SMCCCv1.2 extended input/output registers.
+ * So, the legacy SMC invocation is not used.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static bool arm_ffa_is_supported(void (*invoke_fn)(ulong a0, ulong a1,
+ ulong a2, ulong a3,
+ ulong a4, ulong a5,
+ ulong a6, ulong a7,
+ struct arm_smccc_res *res))
+{
+ return arm_ffa_discover(NULL);
+}
+
+/* Arm FF-A driver operations */
+
+static const struct ffa_bus_ops ffa_ops = {
+ .partition_info_get = ffa_get_partitions_info_hdlr,
+ .sync_send_receive = ffa_msg_send_direct_req_hdlr,
+ .rxtx_unmap = ffa_unmap_rxtx_buffers_hdlr,
+};
+
+/* Registering the FF-A driver as an SMCCC feature driver */
+
+ARM_SMCCC_FEATURE_DRIVER(arm_ffa) = {
+ .driver_name = FFA_DRV_NAME,
+ .is_supported = arm_ffa_is_supported,
+};
+
+/* Declaring the FF-A driver under UCLASS_FFA */
+
+U_BOOT_DRIVER(arm_ffa) = {
+ .name = FFA_DRV_NAME,
+ .id = UCLASS_FFA,
+ .flags = DM_REMOVE_OS_PREPARE,
+ .ops = &ffa_ops,
+};
diff --git a/drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h b/drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h
new file mode 100644
index 0000000000..4338f9c9b1
--- /dev/null
+++ b/drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ */
+
+#ifndef __SANDBOX_ARM_FFA_PRV_H
+#define __SANDBOX_ARM_FFA_PRV_H
+
+/* Future sandbox support private declarations */
+
+#endif
diff --git a/include/arm_ffa.h b/include/arm_ffa.h
new file mode 100644
index 0000000000..db9b1be995
--- /dev/null
+++ b/include/arm_ffa.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ */
+
+#ifndef __ARM_FFA_H
+#define __ARM_FFA_H
+
+#include <linux/printk.h>
+
+/*
+ * This header is public. It can be used by clients to access
+ * data structures and definitions they need
+ */
+
+/*
+ * struct ffa_partition_info - Partition information descriptor
+ * @id: Partition ID
+ * @exec_ctxt: Execution context count
+ * @properties: Partition properties
+ *
+ * Data structure containing information about partitions instantiated in the system
+ * This structure is filled with the data queried by FFA_PARTITION_INFO_GET
+ */
+struct ffa_partition_info {
+ u16 id;
+ u16 exec_ctxt;
+/* partition supports receipt of direct requests */
+#define FFA_PARTITION_DIRECT_RECV BIT(0)
+/* partition can send direct requests. */
+#define FFA_PARTITION_DIRECT_SEND BIT(1)
+/* partition can send and receive indirect messages. */
+#define FFA_PARTITION_INDIRECT_MSG BIT(2)
+ u32 properties;
+};
+
+/*
+ * struct ffa_partition_uuid - 16 bytes UUID transmitted by FFA_PARTITION_INFO_GET
+ * @a1-4: 32-bit words access to the UUID data
+ *
+ */
+struct ffa_partition_uuid {
+ u32 a1; /* w1 */
+ u32 a2; /* w2 */
+ u32 a3; /* w3 */
+ u32 a4; /* w4 */
+};
+
+/**
+ * struct ffa_partition_desc - the secure partition descriptor
+ * @info: partition information
+ * @sp_uuid: the secure partition UUID
+ *
+ * Each partition has its descriptor containing the partitions information and the UUID
+ */
+struct ffa_partition_desc {
+ struct ffa_partition_info info;
+ struct ffa_partition_uuid sp_uuid;
+};
+
+/*
+ * struct ffa_send_direct_data - Data structure hosting the data
+ * used by FFA_MSG_SEND_DIRECT_{REQ,RESP}
+ * @data0-4: Data read/written from/to x3-x7 registers
+ *
+ * Data structure containing the data to be sent by FFA_MSG_SEND_DIRECT_REQ
+ * or read from FFA_MSG_SEND_DIRECT_RESP
+ */
+
+/* For use with FFA_MSG_SEND_DIRECT_{REQ,RESP} which pass data via registers */
+struct ffa_send_direct_data {
+ ulong data0; /* w3/x3 */
+ ulong data1; /* w4/x4 */
+ ulong data2; /* w5/x5 */
+ ulong data3; /* w6/x6 */
+ ulong data4; /* w7/x7 */
+};
+
+struct udevice;
+
+/**
+ * struct ffa_bus_ops - Operations for FF-A
+ * @partition_info_get: callback for the FFA_PARTITION_INFO_GET
+ * @sync_send_receive: callback for the FFA_MSG_SEND_DIRECT_REQ
+ * @rxtx_unmap: callback for the FFA_RXTX_UNMAP
+ *
+ * The data structure providing all the operations supported by the driver.
+ * This structure is EFI runtime resident.
+ */
+struct ffa_bus_ops {
+ int (*partition_info_get)(struct udevice *dev, const char *uuid_str,
+ u32 *sp_count, struct ffa_partition_desc **sp_descs);
+ int (*sync_send_receive)(struct udevice *dev, u16 dst_part_id,
+ struct ffa_send_direct_data *msg,
+ bool is_smc64);
+ int (*rxtx_unmap)(struct udevice *dev);
+};
+
+#define ffa_get_ops(dev) ((struct ffa_bus_ops *)(dev)->driver->ops)
+
+/**
+ * ffa_rxtx_unmap() - FFA_RXTX_UNMAP driver operation
+ * Please see ffa_unmap_rxtx_buffers_hdlr() description for more details.
+ */
+int ffa_rxtx_unmap(struct udevice *dev);
+
+/**
+ * ffa_unmap_rxtx_buffers_hdlr() - FFA_RXTX_UNMAP handler function
+ * @dev: The arm_ffa bus device
+ *
+ * This function implements FFA_RXTX_UNMAP FF-A function
+ * to unmap the RX/TX buffers
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_unmap_rxtx_buffers_hdlr(struct udevice *dev);
+
+/**
+ * ffa_sync_send_receive() - FFA_MSG_SEND_DIRECT_{REQ,RESP} driver operation
+ * Please see ffa_msg_send_direct_req_hdlr() description for more details.
+ */
+int ffa_sync_send_receive(struct udevice *dev, u16 dst_part_id,
+ struct ffa_send_direct_data *msg, bool is_smc64);
+
+/**
+ * ffa_msg_send_direct_req_hdlr() - FFA_MSG_SEND_DIRECT_{REQ,RESP} handler function
+ * @dev: The arm_ffa bus device
+ * @dst_part_id: destination partition ID
+ * @msg: pointer to the message data preallocated by the client (in/out)
+ * @is_smc64: select 64-bit or 32-bit FF-A ABI
+ *
+ * This function implements FFA_MSG_SEND_DIRECT_{REQ,RESP}
+ * FF-A functions.
+ *
+ * FFA_MSG_SEND_DIRECT_REQ is used to send the data to the secure partition.
+ * The response from the secure partition is handled by reading the
+ * FFA_MSG_SEND_DIRECT_RESP arguments.
+ *
+ * The maximum size of the data that can be exchanged is 40 bytes which is
+ * sizeof(struct ffa_send_direct_data) as defined by the FF-A specification 1.0
+ * in the section relevant to FFA_MSG_SEND_DIRECT_{REQ,RESP}
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_msg_send_direct_req_hdlr(struct udevice *dev, u16 dst_part_id,
+ struct ffa_send_direct_data *msg, bool is_smc64);
+
+/**
+ * ffa_partition_info_get() - FFA_PARTITION_INFO_GET driver operation
+ * Please see ffa_get_partitions_info_hdlr() description for more details.
+ */
+int ffa_partition_info_get(struct udevice *dev, const char *uuid_str,
+ u32 *sp_count, struct ffa_partition_desc **sp_descs);
+
+/**
+ * ffa_get_partitions_info_hdlr() - FFA_PARTITION_INFO_GET handler function
+ * @uuid_str: pointer to the UUID string
+ * @sp_count: address of the variable containing the number of partitions matching the UUID
+ * The variable is set by the driver
+ * @sp_descs: address of the descriptors of the partitions matching the UUID
+ * The address is set by the driver
+ *
+ * Return the number of partitions and their descriptors matching the UUID
+ *
+ * Query the secure partition data from uc_priv.
+ * If not found, invoke FFA_PARTITION_INFO_GET
+ * FF-A function to query the partition information from secure world.
+ *
+ * A client of the FF-A driver should know the UUID of the service it wants to
+ * access. It should use the UUID to request the FF-A driver to provide the
+ * partition(s) information of the service. The FF-A driver uses
+ * PARTITION_INFO_GET to obtain this information. This is implemented through
+ * ffa_get_partitions_info_hdlr() function.
+ * A new FFA_PARTITION_INFO_GET call is issued (first one performed through
+ * ffa_cache_partitions_info) allowing to retrieve the partition(s) information.
+ * They are not saved (already done). We only update the UUID in the cached area.
+ * This assumes that partitions data does not change in the secure world.
+ * Otherwise u-boot will have an outdated partition data. The benefit of caching
+ * the information in the FF-A driver is to accommodate discovery after
+ * ExitBootServices().
+ *
+ * Return:
+ *
+ * @sp_count: the number of partitions
+ * @sp_descs: address of the partitions descriptors
+ *
+ * On success 0 is returned. Otherwise, failure
+ */
+int ffa_get_partitions_info_hdlr(struct udevice *dev, const char *uuid_str,
+ u32 *sp_count, struct ffa_partition_desc **sp_descs);
+
+struct ffa_priv;
+
+/**
+ * ffa_set_smc_conduit() - Set the SMC conduit
+ * @dev: The FF-A bus device
+ *
+ * Selects the SMC conduit by setting the FF-A ABI invoke function.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_set_smc_conduit(struct udevice *dev);
+
+#endif
diff --git a/include/arm_ffa_priv.h b/include/arm_ffa_priv.h
new file mode 100644
index 0000000000..d564c33c64
--- /dev/null
+++ b/include/arm_ffa_priv.h
@@ -0,0 +1,246 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ */
+
+#ifndef __ARM_FFA_PRV_H
+#define __ARM_FFA_PRV_H
+
+#include <mapmem.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+
+/* This header is exclusively used by the FF-A Uclass and FF-A driver(s) */
+
+/* Arm FF-A driver name */
+#define FFA_DRV_NAME "arm_ffa"
+
+/* The FF-A SMC function definitions */
+
+#if CONFIG_IS_ENABLED(SANDBOX)
+
+/* Providing Arm SMCCC declarations to sandbox */
+
+/**
+ * struct sandbox_smccc_1_2_regs - emulated SMC call arguments or results
+ * @a0-a17 argument values from registers 0 to 17
+ */
+struct sandbox_smccc_1_2_regs {
+ ulong a0;
+ ulong a1;
+ ulong a2;
+ ulong a3;
+ ulong a4;
+ ulong a5;
+ ulong a6;
+ ulong a7;
+ ulong a8;
+ ulong a9;
+ ulong a10;
+ ulong a11;
+ ulong a12;
+ ulong a13;
+ ulong a14;
+ ulong a15;
+ ulong a16;
+ ulong a17;
+};
+
+typedef struct sandbox_smccc_1_2_regs ffa_value_t;
+
+#define ARM_SMCCC_FAST_CALL 1UL
+#define ARM_SMCCC_OWNER_STANDARD 4
+#define ARM_SMCCC_SMC_32 0
+#define ARM_SMCCC_SMC_64 1
+#define ARM_SMCCC_TYPE_SHIFT 31
+#define ARM_SMCCC_CALL_CONV_SHIFT 30
+#define ARM_SMCCC_OWNER_MASK 0x3f
+#define ARM_SMCCC_OWNER_SHIFT 24
+#define ARM_SMCCC_FUNC_MASK 0xffff
+
+#define ARM_SMCCC_CALL_VAL(type, calling_convention, owner, func_num) \
+ (((type) << ARM_SMCCC_TYPE_SHIFT) | \
+ ((calling_convention) << ARM_SMCCC_CALL_CONV_SHIFT) | \
+ (((owner) & ARM_SMCCC_OWNER_MASK) << ARM_SMCCC_OWNER_SHIFT) | \
+ ((func_num) & ARM_SMCCC_FUNC_MASK))
+
+#else
+/* CONFIG_ARM64 */
+#include <linux/arm-smccc.h>
+typedef struct arm_smccc_1_2_regs ffa_value_t;
+#endif
+
+/* Defining the function pointer type for the function executing the FF-A ABIs */
+typedef void (*invoke_ffa_fn_t)(ffa_value_t args, ffa_value_t *res);
+
+/* FF-A driver version definitions */
+
+#define MAJOR_VERSION_MASK GENMASK(30, 16)
+#define MINOR_VERSION_MASK GENMASK(15, 0)
+#define GET_FFA_MAJOR_VERSION(x) \
+ ((u16)(FIELD_GET(MAJOR_VERSION_MASK, (x))))
+#define GET_FFA_MINOR_VERSION(x) \
+ ((u16)(FIELD_GET(MINOR_VERSION_MASK, (x))))
+#define PACK_VERSION_INFO(major, minor) \
+ (FIELD_PREP(MAJOR_VERSION_MASK, (major)) | \
+ FIELD_PREP(MINOR_VERSION_MASK, (minor)))
+
+#define FFA_MAJOR_VERSION (1)
+#define FFA_MINOR_VERSION (0)
+#define FFA_VERSION_1_0 \
+ PACK_VERSION_INFO(FFA_MAJOR_VERSION, FFA_MINOR_VERSION)
+
+/* Endpoint ID mask (u-boot endpoint ID) */
+
+#define GET_SELF_ENDPOINT_ID_MASK GENMASK(15, 0)
+#define GET_SELF_ENDPOINT_ID(x) \
+ ((u16)(FIELD_GET(GET_SELF_ENDPOINT_ID_MASK, (x))))
+
+#define PREP_SELF_ENDPOINT_ID_MASK GENMASK(31, 16)
+#define PREP_SELF_ENDPOINT_ID(x) \
+ (FIELD_PREP(PREP_SELF_ENDPOINT_ID_MASK, (x)))
+
+/* Partition endpoint ID mask (partition with which u-boot communicates with) */
+
+#define PREP_PART_ENDPOINT_ID_MASK GENMASK(15, 0)
+#define PREP_PART_ENDPOINT_ID(x) \
+ (FIELD_PREP(PREP_PART_ENDPOINT_ID_MASK, (x)))
+
+/* Definitions of the Arm FF-A interfaces supported by the Arm FF-A driver */
+
+#define FFA_SMC(calling_convention, func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, (calling_convention), \
+ ARM_SMCCC_OWNER_STANDARD, (func_num))
+
+#define FFA_SMC_32(func_num) FFA_SMC(ARM_SMCCC_SMC_32, (func_num))
+#define FFA_SMC_64(func_num) FFA_SMC(ARM_SMCCC_SMC_64, (func_num))
+
+enum ffa_abis {
+ FFA_ERROR = 0x60,
+ FFA_SUCCESS = 0x61,
+ FFA_INTERRUPT = 0x62,
+ FFA_VERSION = 0x63,
+ FFA_FEATURES = 0x64,
+ FFA_RX_RELEASE = 0x65,
+ FFA_RXTX_MAP = 0x66,
+ FFA_RXTX_UNMAP = 0x67,
+ FFA_PARTITION_INFO_GET = 0x68,
+ FFA_ID_GET = 0x69,
+ FFA_RUN = 0x6d,
+ FFA_MSG_SEND_DIRECT_REQ = 0x6f,
+ FFA_MSG_SEND_DIRECT_RESP = 0x70,
+
+ /* To be updated when adding new FFA IDs */
+ FFA_FIRST_ID = FFA_ERROR, /* Lowest number ID */
+ FFA_LAST_ID = FFA_MSG_SEND_DIRECT_RESP, /* Highest number ID */
+};
+
+enum ffa_abi_errcode {
+ NOT_SUPPORTED = 1,
+ INVALID_PARAMETERS,
+ NO_MEMORY,
+ BUSY,
+ INTERRUPTED,
+ DENIED,
+ RETRY,
+ ABORTED,
+ MAX_NUMBER_FFA_ERR
+};
+
+extern int ffa_to_std_errmap[MAX_NUMBER_FFA_ERR];
+
+/* Container structure and helper macros to map between an FF-A error and relevant error log */
+struct ffa_abi_errmap {
+ char *err_str[MAX_NUMBER_FFA_ERR];
+};
+
+#define FFA_ERRMAP_COUNT (FFA_LAST_ID - FFA_FIRST_ID + 1)
+#define FFA_ID_TO_ERRMAP_ID(ffa_id) ((ffa_id) - FFA_FIRST_ID)
+
+/**
+ * enum ffa_rxtx_buf_sizes - minimum sizes supported
+ * for the RX/TX buffers
+ */
+enum ffa_rxtx_buf_sizes {
+ RXTX_4K,
+ RXTX_64K,
+ RXTX_16K
+};
+
+/**
+ * struct ffa_rxtxpair - Hosts the RX/TX buffers virtual addresses
+ * @rxbuf: virtual address of the RX buffer
+ * @txbuf: virtual address of the TX buffer
+ * @rxtx_min_pages: RX/TX buffers minimum size in pages
+ *
+ * Hosts the virtual addresses of the mapped RX/TX buffers
+ * These addresses are used by the FF-A functions that use the RX/TX buffers
+ */
+struct ffa_rxtxpair {
+ void *rxbuf; /* Virtual address returned by memalign */
+ void *txbuf; /* Virtual address returned by memalign */
+ size_t rxtx_min_pages; /* Minimum number of pages in each of the RX/TX buffers */
+};
+
+struct ffa_partition_desc;
+
+/**
+ * struct ffa_partitions - descriptors for all secure partitions
+ * @count: The number of partitions descriptors
+ * @descs The partitions descriptors table
+ *
+ * Contains the partitions descriptors table
+ */
+struct ffa_partitions {
+ u32 count;
+ struct ffa_partition_desc *descs; /* Virtual address */
+};
+
+/**
+ * struct ffa_priv - the driver private data structure
+ *
+ * @fwk_version: FF-A framework version
+ * @emul: FF-A sandbox emulator
+ * @id: u-boot endpoint ID
+ * @partitions: The partitions descriptors structure
+ * @pair: The RX/TX buffers pair
+ *
+ * The device private data structure containing all the
+ * data read from secure world.
+ */
+struct ffa_priv {
+ u32 fwk_version;
+ struct udevice *emul;
+ u16 id;
+ struct ffa_partitions partitions;
+ struct ffa_rxtxpair pair;
+};
+
+/**
+ * ffa_get_version_hdlr() - FFA_VERSION handler function
+ * @dev: The FF-A bus device
+ *
+ * Implement FFA_VERSION FF-A function
+ * to get from the secure world the FF-A framework version
+ * FFA_VERSION is used to discover the FF-A framework.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+int ffa_get_version_hdlr(struct udevice *dev);
+
+/**
+ * invoke_ffa_fn() - SMC wrapper
+ * @args: FF-A ABI arguments to be copied to Xn registers
+ * @res: FF-A ABI return data to be copied from Xn registers
+ *
+ * Calls low level SMC implementation.
+ * This function should be implemented by the user driver.
+ */
+void invoke_ffa_fn(ffa_value_t args, ffa_value_t *res);
+
+#endif
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 307ad6931c..3c6af2e3d2 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -4,6 +4,11 @@
*
* (C) Copyright 2012
* Pavel Herrmann <morpheus.ibis at gmail.com>
+ *
+ * Copyright 2022-2023 Arm Limited and/or its affiliates <open-source-office at arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
*/
#ifndef _DM_UCLASS_ID_H
@@ -57,6 +62,7 @@ enum uclass_id {
UCLASS_ETH, /* Ethernet device */
UCLASS_ETH_PHY, /* Ethernet PHY device */
UCLASS_EXTCON, /* External Connector Class */
+ UCLASS_FFA, /* Arm Firmware Framework for Armv8-A */
UCLASS_FIRMWARE, /* Firmware */
UCLASS_FPGA, /* FPGA device */
UCLASS_FUZZING_ENGINE, /* Fuzzing engine */
--
2.25.1
More information about the U-Boot
mailing list