[PATCH v4 1/4] cmd: bind: Add unbind command with driver filter

[Miquel Raynal]

Hi Marek,

marex at denx.de wrote on Fri, 4 Aug 2023 17:40:07 +0200:

> On 8/4/23 17:12, Miquel Raynal wrote:
> > Hi,
> > 
> > marex at denx.de wrote on Fri, 4 Aug 2023 17:05:01 +0200:
> >   
> >> On 8/4/23 17:01, Tom Rini wrote:  
> >>> On Fri, Aug 04, 2023 at 04:42:13PM +0200, Marek Vasut wrote:  
> >>>> On 8/4/23 09:00, Miquel Raynal wrote:  
> >>>>> Hi Marek,
> >>>>>
> >>>>> marex at denx.de wrote on Wed,  2 Aug 2023 14:46:54 +0200:  
> >>>>>   >>>>>> Extend the driver core to perform lookup by both OF node and driver  
> >>>>>> bound to the node. Use this to look up specific device instances to
> >>>>>> unbind from nodes in the unbind command. One example where this is
> >>>>>> needed is USB peripheral controller, which may have multiple gadget
> >>>>>> drivers bound to it. The unbind command has to select that specific
> >>>>>> gadget driver instance to unbind from the controller, not unbind the
> >>>>>> controller driver itself from the controller.
> >>>>>>
> >>>>>> USB ethernet gadget usage looks as follows with this change. Notice
> >>>>>> the extra 'usb_ether' addition in the 'unbind' command at the end.
> >>>>>> "
> >>>>>> bind /soc/usb-otg at 49000000 usb_ether
> >>>>>> setenv ethact usb_ether
> >>>>>> setenv loadaddr 0xc2000000
> >>>>>> setenv ipaddr 10.0.0.2
> >>>>>> setenv serverip 10.0.0.1
> >>>>>> setenv netmask 255.255.255.0
> >>>>>> tftpboot 0xc2000000 10.0.0.1:test.file
> >>>>>> unbind /soc/usb-otg at 49000000 usb_ether  
> >>>>>
> >>>>> This extra parameter does not seem to work on the BBBW. I cannot select
> >>>>> the "usb_ether" driver like you do.
> >>>>>
> >>>>> Good news though, I am now able to use fastboot, but it is not
> >>>>> straightforward:
> >>>>>
> >>>>> Here is my sequence right after the boot (reducing the dm tree output
> >>>>> to the usb nodes for clarity):  
> >>>>>   >>>>> => dm tree  
> >>>>>     misc          0  [ + ]   ti-musb-wrapper       |   |-- usb at 47400000
> >>>>>     usb           0  [ + ]   ti-musb-peripheral    |   |   |-- usb at 47401000
> >>>>>     ethernet      1  [ + ]   usb_ether             |   |   |   `-- usb_ether
> >>>>>     bootdev       3  [   ]   eth_bootdev           |   |   |       `-- usb_ether.bootdev
> >>>>>     usb           0  [   ]   ti-musb-host          |   |   `-- usb at 47401800  
> >>>>> => fastboot usb 0  
> >>>>> couldn't find an available UDC
> >>>>> g_dnl_register: failed!, error: -19  
> >>>>
> >>>> That is expected and not a bug, since the beagle explicitly binds USB
> >>>> ethernet to MUSB gadget in board file, which is legacy deprecated way.  
> >>>
> >>> So, we should do away with, probably all of arch_misc_init() in
> >>> arch/arm/mach-omap2/am33xx/board.c for the non-SPL case.  
> >>
> >> Yes
> >>  
> >>>>> exit not allowed from main input shell.  
> >>>>> => unbind /ocp/usb at 47400000/usb at 47401000 usb_ether  
> >>>>
> >>>> Does  
> >>>>   >>>> => unbind ethernet 0  
> >>>>
> >>>> work ?
> >>>>
> >>>> If so, 1/4 in this series can be skipped altogether.
> >>>>
> >>>> You likely won't even need the rebinding of ti-musb-peripheral anymore.  
> 
> Did you test this yet ?

Unfortunately it does not work. Indeed it would be much simpler than
using the node path. Any idea why?

Thanks,
Miquèl