[PATCH v2] board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity

[Eugen Hristev]

On 7/24/23 14:35, Mihai Sain wrote:
> Add initial support for sama5d29_curiosity board.
> 
> Hardware:
> SoC: SAMA5D29 500 MHz
> DRAM: LPDDR2 512 MiB
> PMIC: MCP16502
> Debug: UART0
> Flash: QSPI NOR 8 MiB
> RGB LCD connector
> Mikrobus connectors x 2
> SD-Card connectors x 2
> USB 2.0 x 2
> 
> Changes in v2:

The version changes must be written after the `---` dashes, such that 
they will not land in the commit message.
I fixed this for you.

> * Remove CONFIG_SYS_PROMPT and CONFIG_SYS_PROMPT_HUSH_PS2
> * Remove CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_SDRAM_SIZE
> 
> Signed-off-by: Mihai Sain <mihai.sain at microchip.com>
> ---

[snip]

> diff --git a/board/atmel/sama5d29_curiosity/MAINTAINERS b/board/atmel/sama5d29_curiosity/MAINTAINERS
> new file mode 100644
> index 0000000000..110c3d2874
> --- /dev/null
> +++ b/board/atmel/sama5d29_curiosity/MAINTAINERS
> @@ -0,0 +1,8 @@
> +SAMA5D29 CURIOSITY BOARD
> +M:     Mihai Sain <mihai.sain at microchip.com>
> +S:     Maintained
> +F:     board/atmel/sama5d29_curiosity.c
> +F:     include/configs/sama5d29_curiosity.h
> +F:     configs/sama5d29_curiosity_mmc_defconfig
> +F:     configs/sama5d29_curiosity_mmc1_defconfig
> +F:     configs/sama5d29_curiosity_qspiflash_defconfig

New requirement is to have the DT files added to this list as well

I added them for you,

and applied to u-boot-at91/next , thanks !