[PATCH 2/2] mtd: nand: raw: atmel: Add error handling when rb-gpios missing
Alexander Dahl
ada at thorsis.com
Tue Aug 8 15:02:50 CEST 2023
Adapt behaviour to Linux kernel driver.
The return value of gpio_request_by_name_nodev() was not checked before,
and thus in case 'rb-gpios' was missing in DT, rb.type was set to
ATMEL_NAND_GPIO_RB nevertheless, leading to output like this for
example (on sam9x60-curiosity with the line removed from dts):
NAND: Could not find valid ONFI parameter page; aborting
device found, Manufacturer ID: 0xc2, Chip ID: 0xdc
Macronix NAND 512MiB 3,3V 8-bit
512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 64
atmel-nand-controller nand-controller: NAND scan failed: -22
Failed to probe nand driver (err = -22)
Failed to initialize NAND controller. (error -22)
0 MiB
Note: not having that gpio assigned in dts is fine, the driver does not
override nand_chip->dev_ready() then and a generic solution is used.
Fixes: 6a8dfd57220d ("nand: atmel: Add DM based NAND driver")
Signed-off-by: Alexander Dahl <ada at thorsis.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 2b29c8def6..8e745a5111 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1600,10 +1600,13 @@ static struct atmel_nand *atmel_nand_create(struct atmel_nand_controller *nc,
nand->cs[i].rb.type = ATMEL_NAND_NATIVE_RB;
nand->cs[i].rb.id = val;
} else {
- gpio_request_by_name_nodev(np, "rb-gpios", 0,
- &nand->cs[i].rb.gpio,
- GPIOD_IS_IN);
- nand->cs[i].rb.type = ATMEL_NAND_GPIO_RB;
+ ret = gpio_request_by_name_nodev(np, "rb-gpios", 0,
+ &nand->cs[i].rb.gpio,
+ GPIOD_IS_IN);
+ if (ret)
+ dev_err(nc->dev, "Failed to get R/B gpio (err = %d)\n", ret);
+ else
+ nand->cs[i].rb.type = ATMEL_NAND_GPIO_RB;
}
gpio_request_by_name_nodev(np, "cs-gpios", 0,
--
2.30.2
More information about the U-Boot
mailing list