[PATCH 0/4] at91: sam9x60-curiosity: Misc improvements
Alexander Dahl
ada at thorsis.com
Wed Aug 9 16:16:18 CEST 2023
Hei hei,
while working with the sam9x60-curiosity board I noticed some things
still have rough edges on U-Boot shell for that device. With these
patches (and some more config options enabled), the following commands
now work as expected: reset, led, button.
The whole series is based on atmel/next.
Note: some things here might be useful to implement for other Microchip
boards. However I currently only have this one board, and I'm not sure
if this is a direction appreciated by Microchip? So you might see all
this as suggestion.
Greets
Alex
Alexander Dahl (4):
configs: at91: sam9x60_curiosity: Sync both defconfig variants
configs: at91: sam9x60: Switch to new reset driver
at91: sam9x60-curiosity: Add proper LED support
ARM: dts: at91: sam9x60-curiosity: Add user button support
.../dts/at91-sam9x60_curiosity-u-boot.dtsi | 18 +++++++
arch/arm/dts/at91-sam9x60_curiosity.dts | 50 +++++++++++++++++++
.../sam9x60_curiosity/sam9x60_curiosity.c | 18 +++++++
configs/sam9x60_curiosity_mmc1_defconfig | 4 +-
configs/sam9x60_curiosity_mmc_defconfig | 15 +++++-
configs/sam9x60ek_mmc_defconfig | 4 +-
configs/sam9x60ek_nandflash_defconfig | 4 +-
configs/sam9x60ek_qspiflash_defconfig | 4 +-
8 files changed, 108 insertions(+), 9 deletions(-)
base-commit: 87d1cac49d265ead979ff75bda36c45fa9025193
--
2.30.2
More information about the U-Boot
mailing list