[PATCH 4/4] ARM: dts: at91: sam9x60-curiosity: Add user button support

Alexander Dahl ada at thorsis.com
Wed Aug 9 16:16:22 CEST 2023


Copied as is from Linux Kernel.  Works out of the box if the following
config options are enabled: CONFIG_BUTTON, CONFIG_BUTTON_GPIO,
CONFIG_CMD_BUTTON, CONFIG_DM_GPIO.

Signed-off-by: Alexander Dahl <ada at thorsis.com>
---
 arch/arm/dts/at91-sam9x60_curiosity.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts
index 244cacfe1b..99867d2bf8 100644
--- a/arch/arm/dts/at91-sam9x60_curiosity.dts
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -7,6 +7,7 @@
  * Author: Durai Manickam KR <durai.manickamkr at microchip.com>
  */
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include "sam9x60.dtsi"
 
@@ -33,6 +34,19 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -189,6 +203,12 @@
 		};
 	};
 
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
 	leds {
 		pinctrl_gpio_leds: gpio-leds {
 			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-- 
2.30.2



More information about the U-Boot mailing list