[PATCH] rockchip: rk356x: Enable poweroff command
Kever Yang
kever.yang at rock-chips.com
Mon Aug 14 05:06:33 CEST 2023
Hi Jonas,
Please split this patch into two patch, one for update defconfig
and one for update pmic Kconfig.
Thanks,
- Kever
On 2023/8/4 03:54, Jonas Karlman wrote:
> With PMIC_RK8XX, SYSRESET and CMD_POWEROFF options enabled it is
> possible to power down a board using the poweroff command and turn the
> board back on using a power button.
>
> Enable the poweroff command on RK356x boards that have a button wired
> to PMIC pwron. Also update to use PMIC poweroff when PMIC_RK8XX is
> enabled to avoid also having to enable the SYSRESET_CMD_POWEROFF option.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> ---
> configs/quartz64-a-rk3566_defconfig | 1 +
> configs/quartz64-b-rk3566_defconfig | 1 +
> configs/rock-3a-rk3568_defconfig | 1 +
> configs/soquartz-model-a-rk3566_defconfig | 1 +
> drivers/power/pmic/Kconfig | 1 +
> 5 files changed, 5 insertions(+)
>
> diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig
> index d55b224feacd..6853cd6c44b4 100644
> --- a/configs/quartz64-a-rk3566_defconfig
> +++ b/configs/quartz64-a-rk3566_defconfig
> @@ -52,6 +52,7 @@ CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_PCI=y
> +CONFIG_CMD_POWEROFF=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_PMIC=y
> diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig
> index b98c81f9dcef..aa29fff14643 100644
> --- a/configs/quartz64-b-rk3566_defconfig
> +++ b/configs/quartz64-b-rk3566_defconfig
> @@ -50,6 +50,7 @@ CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_PCI=y
> +CONFIG_CMD_POWEROFF=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_PMIC=y
> diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
> index 44ff054df665..409aa95acf06 100644
> --- a/configs/rock-3a-rk3568_defconfig
> +++ b/configs/rock-3a-rk3568_defconfig
> @@ -49,6 +49,7 @@ CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_PCI=y
> +CONFIG_CMD_POWEROFF=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_PMIC=y
> diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig
> index c3958579db73..a0884a797d58 100644
> --- a/configs/soquartz-model-a-rk3566_defconfig
> +++ b/configs/soquartz-model-a-rk3566_defconfig
> @@ -43,6 +43,7 @@ CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_PCI=y
> +CONFIG_CMD_POWEROFF=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_PMIC=y
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> index 176fb07c651a..4a6f0ce093ad 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -233,6 +233,7 @@ config PMIC_QCOM
>
> config PMIC_RK8XX
> bool "Enable support for Rockchip PMIC RK8XX"
> + select SYSRESET_CMD_POWEROFF if SYSRESET && CMD_POWEROFF
> ---help---
> The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs,
> an RTC and two low Rds (resistance (drain to source)) switches. It is
More information about the U-Boot
mailing list