[PATCH 14/17] arm: dts: qcom: sdm845: Add UFS HC and PHY nodes

Bhupesh Sharma bhupesh.sharma at linaro.org
Mon Aug 14 23:54:54 CEST 2023


Add UFS HC and PHY nodes in Qualcomm SDM845 dtsi.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
---
 arch/arm/dts/sdm845.dtsi | 62 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
index 056a1674d5..9ef41e3c84 100644
--- a/arch/arm/dts/sdm845.dtsi
+++ b/arch/arm/dts/sdm845.dtsi
@@ -30,6 +30,68 @@
 			compatible = "qcom,gcc-reset-sdm845";
 			reg = <0x00100000 0x1f0000>;
 			#reset-cells = <1>;
+
+		ufs_mem_hc: ufshc at 1d84000 {
+			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x01d84000 0x2500>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&reset GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 300000000>;
+		};
+
+		ufs_mem_phy: phy at 1d87000 {
+			compatible = "qcom,sdm845-qmp-ufs-phy";
+			reg = <0x01d87000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			ufs_mem_phy_lanes: phy at 1d87400 {
+				reg = <0x01d87400 0x108>,
+				      <0x01d87600 0x1e0>,
+				      <0x01d87c00 0x1dc>,
+				      <0x01d87800 0x108>,
+				      <0x01d87a00 0x1e0>;
+				#phy-cells = <0>;
+			};
 		};
 
 		gpio_north: gpio_north at 3900000 {
-- 
2.38.1



More information about the U-Boot mailing list