[PATCH] doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Originally, exporting the ATF_LOAD_ADDR was required, but since binman has
been used to generate the flash.bin, it is no longer needed to do
such manual export.
    
The ATF address is now passed via binman.

Remove the unneeded export ATF_LOAD_ADDR line.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 doc/imx/habv4/csf_examples/mx8m/csf.sh | 1 -
 1 file changed, 1 deletion(-)

diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh b/doc/imx/habv4/csf_examples/mx8m/csf.sh
index d87015f6c4e2..65c143073cbe 100644
--- a/doc/imx/habv4/csf_examples/mx8m/csf.sh
+++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh
@@ -11,7 +11,6 @@
 
 # 1) Build U-Boot (e.g. for i.MX8MM)
 #
-# export ATF_LOAD_ADDR=0x920000
 # cp -Lv /path/to/arm-trusted-firmware/build/imx8mm/release/bl31.bin .
 # cp -Lv /path/to/firmware-imx-8.14/firmware/ddr/synopsys/ddr3* .
 # make -j imx8mm_board_defconfig
-- 
2.34.1