[RFC] dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation
Simon Glass
sjg at chromium.org
Thu Aug 17 00:29:32 CEST 2023
Hi Jonas,
On Tue, 8 Aug 2023 at 20:03, Simon Glass <sjg at chromium.org> wrote:
>
> Hi Jonas,
>
> On Sat, 5 Aug 2023 at 07:32, Jonas Karlman <jonas at kwiboo.se> wrote:
> >
> > Devices for nodes with e.g. bootph-pre-ram are initialized three times.
> > 1. At SPL stage (always bind and probe only if used)
> > 2. At U-Boot proper pre-reloc (always bind and probe)
> > 3. At U-Boot proper normal (always bind and probe only if used)
> >
> > Change ofnode_pre_reloc to report a node with bootph-pre-ram/sram prop
> > with a pre-reloc status only after U-Boot proper pre-relocation stage.
> > This prevents the device from being probed at U-Boot proper pre-reloc.
> >
> > Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> > ---
> > I am not sure if U-Boot proper pre-reloc behaves like this by design and
> > if there is some other way to signal that a device should not be probed
> > during U-Boot proper pre-reloc stage if it has been probed at SPL stage.
> >
> > For my use-case I added bootph-pre-ram prop to my RK8xx device node to
> > make the PMIC usable in SPL. However, I have no need for this device to
> > probe at U-Boot proper pre-reloc stage just after jumping out of TF-A.
> > And moments later bind and probe yet again at U-Boot proper normal stage.
> >
> > The bootph-pre-ram prop was used to have the device usable in SPL, else
> > I could have used bootph-all or added bootph-some-ram prop to indicate
> > use at U-Boot proper pre-reloc stage.
>
> This is changing how things work...we really need to have something
> explicit to use this new behaviour. Perhaps we can augment the binding
> in some way?
I had another look at this. The binding seems to be silent on this
point, so I believe this patch is correct.
Reviewed-by: Simon Glass <sjg at chromium.org>
>
> >
> > drivers/core/ofnode.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
> > index 8df16e56af5c..ebd5a408ae58 100644
> > --- a/drivers/core/ofnode.c
> > +++ b/drivers/core/ofnode.c
> > @@ -1353,7 +1353,7 @@ bool ofnode_pre_reloc(ofnode node)
> > */
> > if (ofnode_read_bool(node, "bootph-pre-ram") ||
> > ofnode_read_bool(node, "bootph-pre-sram"))
> > - return true;
> > + return !!(gd->flags & GD_FLG_RELOC);
>
> I believe that the compiler knows how to convert 'gd->flags &
> GD_FLG_RELOC' into a bool, so !! is not needed.
>
> >
> > if (IS_ENABLED(CONFIG_OF_TAG_MIGRATE)) {
> > /* detect and handle old tags */
> > --
> > 2.41.0
> >
Regards,
Simon
More information about the U-Boot
mailing list