[PATCH v2 4/5] rockchip: Port IO-domain driver for RK3568 from linux
Jonas Karlman
jonas at kwiboo.se
Tue Aug 22 00:30:28 CEST 2023
Port the Rockchip IO-domain driver for RK3568 from linux.
The driver auto probe after bind to configure IO-domain based on the
regulator voltage. Compared to the linux driver this driver is not
notified about regulator voltage changes and only configure IO-domain
based on the initial voltage autoset by the regulator.
It is not recommended to enable MMC_IO_VOLTAGE or the mmc signal voltage
and IO-domain may end up out of sync.
Based on the linux commit 28b05a64e47c ("soc: rockchip: io-domain: add
rk3568 support").
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Cc: Jianqun Xu <jay.xu at rock-chips.com>
Cc: Heiko Stuebner <heiko at sntech.de>
Cc: Doug Anderson <dianders at chromium.org>
---
v2:
- Add probe after bind comment
- Drop parenthesis
- Collect r-b tag
drivers/misc/Kconfig | 9 ++
drivers/misc/Makefile | 1 +
drivers/misc/rockchip-io-domain.c | 167 ++++++++++++++++++++++++++++++
3 files changed, 177 insertions(+)
create mode 100644 drivers/misc/rockchip-io-domain.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b9f5c7a37aed..d160ce693939 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -101,6 +101,15 @@ config ROCKCHIP_OTP
addressing and a length or through child-nodes that are generated
based on the e-fuse map retrieved from the DTS.
+config ROCKCHIP_IODOMAIN
+ bool "Rockchip IO-domain driver support"
+ depends on DM_REGULATOR && ARCH_ROCKCHIP
+ default y if ROCKCHIP_RK3568
+ help
+ Enable support for IO-domains in Rockchip SoCs. It is necessary
+ for the IO-domain setting of the SoC to match the voltage supplied
+ by the regulators.
+
config SIFIVE_OTP
bool "SiFive eMemory OTP driver"
depends on MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index fd8805f34bd9..b67b82358a6c 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_SANDBOX) += qfw_sandbox.o
endif
obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o
obj-$(CONFIG_ROCKCHIP_OTP) += rockchip-otp.o
+obj-$(CONFIG_$(SPL_TPL_)ROCKCHIP_IODOMAIN) += rockchip-io-domain.o
obj-$(CONFIG_SANDBOX) += syscon_sandbox.o misc_sandbox.o
obj-$(CONFIG_SIFIVE_OTP) += sifive-otp.o
obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
diff --git a/drivers/misc/rockchip-io-domain.c b/drivers/misc/rockchip-io-domain.c
new file mode 100644
index 000000000000..3f6227f993f9
--- /dev/null
+++ b/drivers/misc/rockchip-io-domain.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip IO Voltage Domain driver
+ *
+ * Ported from linux drivers/soc/rockchip/io-domain.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <power/regulator.h>
+
+#define MAX_SUPPLIES 16
+
+/*
+ * The max voltage for 1.8V and 3.3V come from the Rockchip datasheet under
+ * "Recommended Operating Conditions" for "Digital GPIO". When the typical
+ * is 3.3V the max is 3.6V. When the typical is 1.8V the max is 1.98V.
+ *
+ * They are used like this:
+ * - If the voltage on a rail is above the "1.8" voltage (1.98V) we'll tell the
+ * SoC we're at 3.3.
+ * - If the voltage on a rail is above the "3.3" voltage (3.6V) we'll consider
+ * that to be an error.
+ */
+#define MAX_VOLTAGE_1_8 1980000
+#define MAX_VOLTAGE_3_3 3600000
+
+#define RK3568_PMU_GRF_IO_VSEL0 0x0140
+#define RK3568_PMU_GRF_IO_VSEL1 0x0144
+#define RK3568_PMU_GRF_IO_VSEL2 0x0148
+
+struct rockchip_iodomain_soc_data {
+ int grf_offset;
+ const char *supply_names[MAX_SUPPLIES];
+ int (*write)(struct regmap *grf, int idx, int uV);
+};
+
+static int rk3568_iodomain_write(struct regmap *grf, int idx, int uV)
+{
+ u32 is_3v3 = uV > MAX_VOLTAGE_1_8;
+ u32 val0, val1;
+ int b;
+
+ switch (idx) {
+ case 0: /* pmuio1 */
+ break;
+ case 1: /* pmuio2 */
+ b = idx;
+ val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+ b = idx + 4;
+ val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+ regmap_write(grf, RK3568_PMU_GRF_IO_VSEL2, val0);
+ regmap_write(grf, RK3568_PMU_GRF_IO_VSEL2, val1);
+ break;
+ case 3: /* vccio2 */
+ break;
+ case 2: /* vccio1 */
+ case 4: /* vccio3 */
+ case 5: /* vccio4 */
+ case 6: /* vccio5 */
+ case 7: /* vccio6 */
+ case 8: /* vccio7 */
+ b = idx - 1;
+ val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+ val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+ regmap_write(grf, RK3568_PMU_GRF_IO_VSEL0, val0);
+ regmap_write(grf, RK3568_PMU_GRF_IO_VSEL1, val1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3568_pmu = {
+ .grf_offset = 0x140,
+ .supply_names = {
+ NULL,
+ "pmuio2-supply",
+ "vccio1-supply",
+ NULL,
+ "vccio3-supply",
+ "vccio4-supply",
+ "vccio5-supply",
+ "vccio6-supply",
+ "vccio7-supply",
+ },
+ .write = rk3568_iodomain_write,
+};
+
+static const struct udevice_id rockchip_iodomain_ids[] = {
+ {
+ .compatible = "rockchip,rk3568-pmu-io-voltage-domain",
+ .data = (ulong)&soc_data_rk3568_pmu,
+ },
+ { }
+};
+
+static int rockchip_iodomain_bind(struct udevice *dev)
+{
+ /*
+ * According to the Hardware Design Guide, IO-domain configuration must
+ * be consistent with the power supply voltage (1.8V or 3.3V).
+ * Probe after bind to configure IO-domain voltage early during boot.
+ */
+ dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND);
+
+ return 0;
+}
+
+static int rockchip_iodomain_probe(struct udevice *dev)
+{
+ struct rockchip_iodomain_soc_data *soc_data =
+ (struct rockchip_iodomain_soc_data *)dev_get_driver_data(dev);
+ struct regmap *grf;
+ int ret;
+
+ grf = syscon_get_regmap(dev_get_parent(dev));
+ if (IS_ERR(grf))
+ return PTR_ERR(grf);
+
+ for (int i = 0; i < MAX_SUPPLIES; i++) {
+ const char *supply_name = soc_data->supply_names[i];
+ struct udevice *reg;
+ int uV;
+
+ if (!supply_name)
+ continue;
+
+ ret = device_get_supply_regulator(dev, supply_name, ®);
+ if (ret)
+ continue;
+
+ ret = regulator_autoset(reg);
+ if (ret && ret != -EALREADY && ret != -EMEDIUMTYPE &&
+ ret != -ENOSYS)
+ continue;
+
+ uV = regulator_get_value(reg);
+ if (uV <= 0)
+ continue;
+
+ if (uV > MAX_VOLTAGE_3_3) {
+ dev_crit(dev, "%s: %d uV is too high. May damage SoC!\n",
+ supply_name, uV);
+ continue;
+ }
+
+ soc_data->write(grf, i, uV);
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(rockchip_iodomain) = {
+ .name = "rockchip_iodomain",
+ .id = UCLASS_NOP,
+ .of_match = rockchip_iodomain_ids,
+ .bind = rockchip_iodomain_bind,
+ .probe = rockchip_iodomain_probe,
+};
--
2.41.0
More information about the U-Boot
mailing list