[PATCH v6 3/8] power: pmic: add the base MAX77663 PMIC support
Svyatoslav Ryhel
clamor95 at gmail.com
Tue Aug 22 08:32:15 CEST 2023
Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write functions to access pmic
registers.
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
doc/device-tree-bindings/pmic/max77663.txt | 84 +++++++++++++++++++++
drivers/power/pmic/Kconfig | 9 +++
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/max77663.c | 86 ++++++++++++++++++++++
include/power/max77663.h | 42 +++++++++++
5 files changed, 222 insertions(+)
create mode 100644 doc/device-tree-bindings/pmic/max77663.txt
create mode 100644 drivers/power/pmic/max77663.c
create mode 100644 include/power/max77663.h
diff --git a/doc/device-tree-bindings/pmic/max77663.txt b/doc/device-tree-bindings/pmic/max77663.txt
new file mode 100644
index 0000000000..ddb7d3eb14
--- /dev/null
+++ b/doc/device-tree-bindings/pmic/max77663.txt
@@ -0,0 +1,84 @@
+MAXIM, MAX77663 PMIC
+
+This device uses two drivers:
+- drivers/power/pmic/max77663.c (for parent device)
+- drivers/power/regulator/max77663_regulator.c (for child regulators)
+
+This chapter describes the binding info for the PMIC driver and regulators.
+
+Required properties for PMIC:
+- compatible: "maxim,max77663"
+- reg: usually 0x1c or 0x3c
+
+With those two properties, the pmic device can be used for read/write only.
+To bind each regulator, the optional regulators subnode should exists.
+
+Optional subnode:
+- name: regulators (subnode list of each device's regulator)
+
+Regulators subnode contains set on supported regulators.
+
+Required properties:
+- regulator-name: used for regulator uclass platform data '.name',
+
+List of supported regulator nodes names for max77663:
+- sd0, sd1, sd2, sd3, ldo0, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8
+
+Optional:
+- regulator-min-microvolt: minimum allowed Voltage to set
+- regulator-max-microvolt: minimum allowed Voltage to set
+- regulator-always-on: regulator should be never disabled
+- regulator-boot-on: regulator should be enabled by the bootloader
+
+Linux driver binding for this driver is compatible.
+
+Example:
+
+max77663 at 1c {
+ compatible = "maxim,max77663";
+ reg = <0x1c>;
+
+ regulators {
+ sd0 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ...
+
+ ldo0 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ...
+
+ ldo2 {
+ regulator-name = "avdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3 {
+ regulator-name = "vdd_sdmmc3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ...
+
+ ldo8 {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+};
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 176fb07c65..b2a5e71a87 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -184,6 +184,15 @@ config SPL_DM_PMIC_PFUZE100
This config enables implementation of driver-model pmic uclass features
for PMIC PFUZE100 in SPL. The driver implements read/write operations.
+config DM_PMIC_MAX77663
+ bool "Enable Driver Model for PMIC MAX77663"
+ ---help---
+ This config enables implementation of driver-model pmic uclass features
+ for PMIC MAX77663. The driver implements read/write operations.
+ This is a Power Management IC with a decent set of peripherals from which
+ 4 DC-to-DC Step-Down (SD) Regulators, 9 Low-Dropout Linear (LDO) Regulators,
+ 8 GPIOs, Real-Time Clock (RTC) and more with I2C Compatible Interface.
+
config DM_PMIC_MAX77686
bool "Enable Driver Model for PMIC MAX77686"
---help---
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 0b3b3d62d0..414a9d8225 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o
obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o
obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_MAX77663) += max77663.o
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
diff --git a/drivers/power/pmic/max77663.c b/drivers/power/pmic/max77663.c
new file mode 100644
index 0000000000..4070235d3c
--- /dev/null
+++ b/drivers/power/pmic/max77663.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright(C) 2023 Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <errno.h>
+#include <dm.h>
+#include <i2c.h>
+#include <log.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <power/max77663.h>
+
+static const struct pmic_child_info pmic_children_info[] = {
+ { .prefix = "ldo", .driver = MAX77663_LDO_DRIVER },
+ { .prefix = "sd", .driver = MAX77663_SD_DRIVER },
+ { },
+};
+
+static int max77663_write(struct udevice *dev, uint reg, const uint8_t *buff,
+ int len)
+{
+ int ret;
+
+ ret = dm_i2c_write(dev, reg, buff, len);
+ if (ret) {
+ log_debug("write error to device: %p register: %#x!\n", dev, reg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max77663_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+{
+ int ret;
+
+ ret = dm_i2c_read(dev, reg, buff, len);
+ if (ret) {
+ log_debug("read error from device: %p register: %#x!\n", dev, reg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max77663_bind(struct udevice *dev)
+{
+ ofnode regulators_node;
+ int children;
+
+ regulators_node = dev_read_subnode(dev, "regulators");
+ if (!ofnode_valid(regulators_node)) {
+ log_err("%s regulators subnode not found!\n", dev->name);
+ return -ENXIO;
+ }
+
+ debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
+
+ children = pmic_bind_children(dev, regulators_node, pmic_children_info);
+ if (!children)
+ log_err("%s - no child found\n", dev->name);
+
+ /* Always return success for this device */
+ return 0;
+}
+
+static struct dm_pmic_ops max77663_ops = {
+ .read = max77663_read,
+ .write = max77663_write,
+};
+
+static const struct udevice_id max77663_ids[] = {
+ { .compatible = "maxim,max77663" },
+ { }
+};
+
+U_BOOT_DRIVER(pmic_max77663) = {
+ .name = "max77663_pmic",
+ .id = UCLASS_PMIC,
+ .of_match = max77663_ids,
+ .bind = max77663_bind,
+ .ops = &max77663_ops,
+};
diff --git a/include/power/max77663.h b/include/power/max77663.h
new file mode 100644
index 0000000000..0f764bcbcc
--- /dev/null
+++ b/include/power/max77663.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright(C) 2023 Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#ifndef _MAX77663_H_
+#define _MAX77663_H_
+
+#define MAX77663_LDO_NUM 9
+#define MAX77663_SD_NUM 5
+
+/* Drivers name */
+#define MAX77663_LDO_DRIVER "max77663_ldo"
+#define MAX77663_SD_DRIVER "max77663_sd"
+
+/* Step-Down (SD) Regulator calculations */
+#define SD_STATUS_MASK 0x30
+
+#define SD0_VOLT_MAX_HEX 0x40
+#define SD1_VOLT_MAX_HEX 0x4c
+#define SD_VOLT_MAX_HEX 0xff
+#define SD_VOLT_MIN_HEX 0x02
+
+#define SD0_VOLT_MAX 1400000
+#define SD1_VOLT_MAX 1550000
+#define SD_VOLT_MAX 3787500
+#define SD_VOLT_MIN 625000
+
+#define SD_VOLT_BASE 600000
+
+/* Low-Dropout Linear (LDO) Regulator calculations */
+#define LDO_STATUS_MASK 0xc0
+#define LDO_VOLT_MASK 0x3f
+#define LDO_VOLT_MAX_HEX 0x3f
+
+#define LDO01_VOLT_MAX 2375000
+#define LDO4_VOLT_MAX 1587500
+#define LDO_VOLT_MAX 3950000
+
+#define LDO_VOLT_BASE 800000
+
+#endif /* _MAX77663_H_ */
--
2.39.2
More information about the U-Boot
mailing list