[PATCH v2 5/7] arm: qemu: Enable ramfb by default
Alper Nebi Yasak
alpernebiyasak at gmail.com
Tue Aug 22 14:10:23 CEST 2023
From: Alexander Graf <agraf at csgraf.de>
Now that we have everything in place to support ramfb, let's wire it up
by default in the ARM QEMU targets. That way, you can easily use a
graphical console by just passing -device ramfb to the QEMU command line.
Signed-off-by: Alexander Graf <agraf at csgraf.de>
[Alper: Rebase on bochs changes, add pre-reloc init, error handling]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak at gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak at gmail.com>
---
Changes in v2:
- Rebase on "qemu: arm: Enable Bochs, console buffering, USB keyboard"
- Drop env changes from ARM (necessary but in prerequisite series)
- Drop imply VIDEO, SYS_CONSOLE_IN_ENV changes from ARM (in prereq.)
- Probe QFW in ARM QEMU board_early_init_f to bind ramfb pre-reloc
- Add IS_ENABLED(CONFIG_QFW) check and error handling to ARM QEMU
arch/arm/Kconfig | 3 +++
board/emulation/qemu-arm/qemu-arm.c | 41 +++++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1fd3ccd1607f..7afe26ac804f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1046,6 +1046,9 @@ config ARCH_QEMU
imply USB_XHCI_PCI
imply USB_KEYBOARD
imply CMD_USB
+ imply VIDEO_RAMFB
+ imply BOARD_EARLY_INIT_F
+ imply BOARD_EARLY_INIT_R
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c
index 942f1fff5717..23ef31cb7feb 100644
--- a/board/emulation/qemu-arm/qemu-arm.c
+++ b/board/emulation/qemu-arm/qemu-arm.c
@@ -11,6 +11,7 @@
#include <fdtdec.h>
#include <init.h>
#include <log.h>
+#include <qfw.h>
#include <usb.h>
#include <virtio_types.h>
#include <virtio.h>
@@ -102,6 +103,46 @@ static struct mm_region qemu_arm64_mem_map[] = {
struct mm_region *mem_map = qemu_arm64_mem_map;
#endif
+int board_early_init_f(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ /*
+ * Make sure we enumerate the QEMU Firmware device to bind ramfb
+ * so video_reserve() can reserve memory for it.
+ */
+ if (IS_ENABLED(CONFIG_QFW)) {
+ ret = qfw_get_dev(&dev);
+ if (ret) {
+ log_err("Failed to get QEMU FW device: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ /*
+ * Make sure we enumerate the QEMU Firmware device to find ramfb
+ * before console_init.
+ */
+ if (IS_ENABLED(CONFIG_QFW)) {
+ ret = qfw_get_dev(&dev);
+ if (ret) {
+ log_err("Failed to get QEMU FW device: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
int board_init(void)
{
return 0;
--
2.40.1
More information about the U-Boot
mailing list