[PATCH v2 0/5] at91: sam9x60-curiosity: Misc improvements

[Alexander Dahl]

Hei hei,

while working with the sam9x60-curiosity board I noticed some things
still have rough edges on U-Boot shell for that device.  With these
patches (and some more config options enabled), the following commands
now work as expected: reset, led, button.

The whole series is based on atmel/next.

Note: some things here might be useful to implement for other Microchip
boards.  However I currently only have this one board, and I'm not sure
if this is a direction appreciated by Microchip?  So you might see all
this as suggestion.

See notes on patches for specific changes from v1 to v2 and below for
summary of the changes.

Greets
Alex

v1 -> v2:
  - reworded some commit messages
  - reenabled CONFIG_SYSRESET and CONFIG_SYSRESET_AT91
  - split up LED patch in two new patches

Alexander Dahl (5):
  configs: at91: sam9x60_curiosity: Sync both defconfig variants
  configs: at91: sam9x60: Switch to new reset driver
  ARM: dts: at91: sam9x60-curiosity: Sync LED nodes from Linux
  board: sam9x60-curiosity: Let LED subsystem init leds if enabled
  ARM: dts: at91: sam9x60-curiosity: Sync gpio button from Linux

 .../dts/at91-sam9x60_curiosity-u-boot.dtsi    | 18 +++++++
 arch/arm/dts/at91-sam9x60_curiosity.dts       | 50 +++++++++++++++++++
 .../sam9x60_curiosity/sam9x60_curiosity.c     | 18 +++++++
 configs/sam9x60_curiosity_mmc1_defconfig      |  2 +
 configs/sam9x60_curiosity_mmc_defconfig       | 17 ++++++-
 configs/sam9x60ek_mmc_defconfig               |  2 +
 configs/sam9x60ek_nandflash_defconfig         |  2 +
 configs/sam9x60ek_qspiflash_defconfig         |  2 +
 8 files changed, 110 insertions(+), 1 deletion(-)


base-commit: 0498ff933813932ff057cdc314ab46df4a596d06
-- 
2.30.2