[PATCH v2 4/8] cmd: gpt: Add gpt_partition_bootable variable
Simon Glass
sjg at chromium.org
Thu Aug 24 01:57:45 CEST 2023
Hi Joshue,
On Wed, 23 Aug 2023 at 10:48, Joshua Watt <jpewhacker at gmail.com> wrote:
>
> Adds an additional variable called gpt_partition_bootable that indicates
> if the given partition is bootable or not.
>
> Signed-off-by: Joshua Watt <JPEWhacker at gmail.com>
> ---
> cmd/gpt.c | 9 +++++++--
> doc/usage/cmd/gpt.rst | 3 +++
> test/py/tests/test_gpt.py | 33 +++++++++++++++++++++++++++++++++
> 3 files changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/cmd/gpt.c b/cmd/gpt.c
> index e6f7b0319a..7a8990e400 100644
> --- a/cmd/gpt.c
> +++ b/cmd/gpt.c
> @@ -723,7 +723,7 @@ static int gpt_enumerate(struct blk_desc *desc)
> * gpt_setenv_part_variables() - setup partition environmental variables
> *
> * Setup the gpt_partition_name, gpt_partition_entry, gpt_partition_addr
> - * and gpt_partition_size environment variables.
> + * and gpt_partition_size, gpt_partition_bootable environment variables.
> *
> * @pinfo: pointer to disk partition
> * @i: partition entry
> @@ -750,6 +750,10 @@ static int gpt_setenv_part_variables(struct disk_partition *pinfo, int i)
> if (ret)
> goto fail;
>
> + ret = env_set_ulong("gpt_partition_bootable", !!(pinfo->bootable & PART_BOOTABLE));
> + if (ret)
> + goto fail;
> +
> return 0;
>
> fail:
> @@ -1057,7 +1061,8 @@ U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt,
> " gpt setenv mmc 0 $name\n"
> " - setup environment variables for partition $name:\n"
> " gpt_partition_addr, gpt_partition_size,\n"
> - " gpt_partition_name, gpt_partition_entry\n"
> + " gpt_partition_name, gpt_partition_entry,\n"
> + " gpt_partition_bootable\n"
Please use single quotes except for the """ for function headers.
> " gpt enumerate mmc 0\n"
> " - store list of partitions to gpt_partition_list environment variable\n"
> " gpt guid <interface> <dev>\n"
> diff --git a/doc/usage/cmd/gpt.rst b/doc/usage/cmd/gpt.rst
> index ea2cf73a60..c9d15b2cba 100644
> --- a/doc/usage/cmd/gpt.rst
> +++ b/doc/usage/cmd/gpt.rst
> @@ -85,6 +85,7 @@ information about a particular partition. The variables are:
> * gpt_partition_size (the size of the partition, in hexadecimal blocks)
> * gpt_partition_name (the name of the partition)
> * gpt_partition_entry (the partition number in the table, e.g. 1, 2, 3, etc.)
> +* gpt_partition_bootable (1 if the partition is marked as bootable, 0 if not)
>
> To get the information about the partition named 'rootfs', issue the following
> command:
> @@ -99,6 +100,8 @@ command:
> rootfs
> => echo ${gpt_partition_entry}
> 2
> + => echo ${gpt_partition_bootable}
> + 0
>
> The 'gpt enumerate' command will set the variable 'gpt_partition_list' with the
> list of partition names on the device. For example:
> diff --git a/test/py/tests/test_gpt.py b/test/py/tests/test_gpt.py
> index 339468bc12..1537ceb8c8 100644
> --- a/test/py/tests/test_gpt.py
> +++ b/test/py/tests/test_gpt.py
> @@ -49,6 +49,7 @@ class GptTestDiskImage(object):
> u_boot_utils.run_and_log(u_boot_console, cmd)
> # part1 offset 1MB size 1MB
> cmd = ('sgdisk', '--new=1:2048:4095', '--change-name=1:part1',
> + '-A 1:set:2',
> persistent)
> # part2 offset 2MB size 1.5MB
> u_boot_utils.run_and_log(u_boot_console, cmd)
> @@ -117,6 +118,38 @@ def test_gpt_guid(state_disk_image, u_boot_console):
> output = u_boot_console.run_command('gpt guid host 0')
> assert '375a56f7-d6c9-4e81-b5f0-09d41ca89efe' in output
>
> + at pytest.mark.boardspec('sandbox')
> + at pytest.mark.buildconfigspec('cmd_gpt')
> + at pytest.mark.requiredtool('sgdisk')
> +def test_gpt_setenv(state_disk_image, u_boot_console):
> + """Test the gpt setenv command."""
> + u_boot_console.run_command('host bind 0 ' + state_disk_image.path)
> + output = u_boot_console.run_command('gpt setenv host 0 part1')
> + assert 'success!' in output
> + output = u_boot_console.run_command('echo ${gpt_partition_addr}')
> + assert output.rstrip() == '800'
> + output = u_boot_console.run_command('echo ${gpt_partition_size}')
> + assert output.rstrip() == '800'
> + output = u_boot_console.run_command('echo ${gpt_partition_name}')
> + assert output.rstrip() == 'part1'
> + output = u_boot_console.run_command('echo ${gpt_partition_entry}')
> + assert output.rstrip() == "1"
> + output = u_boot_console.run_command('echo ${gpt_partition_bootable}')
> + assert output.rstrip() == "1"
> +
> + output = u_boot_console.run_command('gpt setenv host 0 part2')
> + assert 'success!' in output
> + output = u_boot_console.run_command('echo ${gpt_partition_addr}')
> + assert output.rstrip() == '1000'
> + output = u_boot_console.run_command('echo ${gpt_partition_size}')
> + assert output.rstrip() == 'c00'
> + output = u_boot_console.run_command('echo ${gpt_partition_name}')
> + assert output.rstrip() == 'part2'
> + output = u_boot_console.run_command('echo ${gpt_partition_entry}')
> + assert output.rstrip() == "2"
> + output = u_boot_console.run_command('echo ${gpt_partition_bootable}')
> + assert output.rstrip() == "0"
> +
> @pytest.mark.boardspec('sandbox')
> @pytest.mark.buildconfigspec('cmd_gpt')
> @pytest.mark.requiredtool('sgdisk')
> --
> 2.33.0
>
Regards,
Simon
More information about the U-Boot
mailing list