[PATCH V5 00/17] board: ti: Add support for BeaglePlay
Mattijs Korpershoek
mkorpershoek at baylibre.com
Thu Aug 24 10:02:10 CEST 2023
On mer., août 23, 2023 at 22:10, Nishanth Menon <nm at ti.com> wrote:
> Add support for BeaglePlay - rev 5
>
> Full series: https://github.com/nmenon/fix-k3-dt-u-boot/commits/beagleplay-v4.2
>
> Caveats:
> * networking: pending https://lore.kernel.org/all/20230822121350.51324-1-rogerq@kernel.org/
> * 32kclk and usb: pending:
> https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/
> OR https://github.com/nmenon/fix-k3-dt-u-boot/commit/853b29d63c1ca642be316f1afb0fb778610dec46
> being properly resolved (NOTE: without this patch, wlan is broken in
> Linux as the 32kclk from SoC is incorrectly supplied to wlan as 25MHz)
> * There seems to be a bug in Linux kernel with sdhci that seems to
> depend on u-boot initialization of sdhci for functionality.
>
> CI loop check: https://github.com/u-boot/u-boot/pull/425 (whenever that
> gets done I guess).
>
> Bootlogs:
> SD Boot: https://gist.github.com/nmenon/c74acb3a895053e05623e886df77c8fe
> eMMC, no SD boot: https://gist.github.com/nmenon/16df3b8fc0e9102f29ebb7836b950a08
> eMMC with SD card: https://gist.github.com/nmenon/042dbe7c08589e7bfe1919da1fedc545
>
> Complete code (with the tmp patch) can be found at:
> https://github.com/nmenon/fix-k3-dt-u-boot/tree/beagleplay-v5
>
> Baseline: 97841de68043 (origin/next) Merge branch '2023-08-22-assorted-code-cleanups' into next
>
> Changes since V4:
> * Switched boot from distro_boot to bootstd - AM62 as a start will rely
> on txt env file.
> * Cleanups around am625_init.c (new patches)
> * Review comment fixups for documentation
> * I have'nt picked up Mattijs's tested by since this is a different
> approach (bootstd Vs distro_bootcmd)
> * Dropped the sdhci patches AND CFG_EXTRA_ENV_SETTINGS (Instead, we
> switch entirely to bootstd and move am62x-sk to bootstd along with
> it).
>
> V4: https://lore.kernel.org/all/20230822184135.2328409-1-nm@ti.com/
> V3: https://lore.kernel.org/all/20230815164440.2713726-1-nm@ti.com/
> V2: https://lore.kernel.org/u-boot/20230727234446.3651836-1-nm@ti.com/
> V1: https://lore.kernel.org/all/20230725185253.2123433-1-nm@ti.com/
>
> Nishanth Menon (16):
> include: configs: ti_armv7_common: Add documentation for protected
> section
> include: configs: am62x_evm: Drop unused SDRAM address
> include: configs: am62x_evm: Wrap distroboot with
> CONFIG_DISTRO_DEFAULTS
> board: ti: am62x: am62x.env: Add explicit boot_targets
> configs: am62x_evm_a53_defconfig: Switch to bootstd
> include: configs: am62x_evm: Drop distro_bootcmd usage
> include: env: ti: ti_armv7_common.env: Rename to ti_common.env
> include: env: ti: ti_common: Add a generic findfdt
> board: ti: am62x: am62x.env: Use default findfdt
> arm: mach-k3: am625_init: Use IS_ENABLED()
> arm: mach-k3: am625_init: Convert rtc_erratumi2327_init to static
> configs: am62x_evm*: Enable EMMC_BOOT configuration
> arm: mach-k3: am625: Add support for UDA FS
> arm: dts: k3-am625-sk-binman: Add labels for unsigned binary
> board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file
> doc: board: ti: Add BeaglePlay documentation
>
> Robert Nelson (1):
> arm: dts: Add k3-am625-beagleplay
I re-tested v5.
Using baseline 97841de68043 ("Merge branch '2023-08-22-assorted-code-cleanups' into next")
I could boot all the way to U-boot proper shell.
And the LEDs work for me as well with:
=> led led-0 toggle
So for the whole series:
Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Note that I did not tried any boot related commands since I mostly work
on Android booting and I have not rebased my wip-branch yet.
>
> arch/arm/dts/Makefile | 2 +
> .../dts/k3-am625-beagleplay-ddr4-1600MTs.dtsi | 2195 +++++++++++++++++
> arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 195 ++
> arch/arm/dts/k3-am625-beagleplay.dts | 758 ++++++
> arch/arm/dts/k3-am625-r5-beagleplay.dts | 86 +
> arch/arm/dts/k3-am625-sk-binman.dtsi | 4 +-
> arch/arm/mach-k3/am625_init.c | 49 +-
> board/siemens/iot2050/iot2050.env | 2 +-
> board/ti/am62ax/am62ax.env | 2 +-
> board/ti/am62x/MAINTAINERS | 7 +
> board/ti/am62x/am62x.env | 7 +-
> board/ti/am62x/beagleplay.env | 18 +
> board/ti/am62x/beagleplay_a53.config | 55 +
> board/ti/am62x/beagleplay_r5.config | 15 +
> board/ti/am64x/am64x.env | 2 +-
> board/ti/am65x/am65x.env | 2 +-
> board/ti/j721e/j721e.env | 2 +-
> board/ti/j721s2/j721s2.env | 2 +-
> board/ti/ks2_evm/k2e_evm.env | 2 +-
> board/ti/ks2_evm/k2g_evm.env | 2 +-
> board/ti/ks2_evm/k2hk_evm.env | 2 +-
> board/ti/ks2_evm/k2l_evm.env | 2 +-
> configs/am62x_evm_a53_defconfig | 6 +-
> configs/am62x_evm_r5_defconfig | 1 +
> doc/board/ti/am62x_beagleplay.rst | 256 ++
> doc/board/ti/img/beagleplay_emmc.svg | 697 ++++++
> doc/board/ti/k3.rst | 1 +
> include/configs/am62x_evm.h | 6 -
> include/configs/ti_armv7_common.h | 2 +-
> .../ti/{ti_armv7_common.env => ti_common.env} | 12 +
> 30 files changed, 4342 insertions(+), 50 deletions(-)
> create mode 100644 arch/arm/dts/k3-am625-beagleplay-ddr4-1600MTs.dtsi
> create mode 100644 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
> create mode 100644 arch/arm/dts/k3-am625-beagleplay.dts
> create mode 100644 arch/arm/dts/k3-am625-r5-beagleplay.dts
> create mode 100644 board/ti/am62x/beagleplay.env
> create mode 100644 board/ti/am62x/beagleplay_a53.config
> create mode 100644 board/ti/am62x/beagleplay_r5.config
> create mode 100644 doc/board/ti/am62x_beagleplay.rst
> create mode 100644 doc/board/ti/img/beagleplay_emmc.svg
> rename include/env/ti/{ti_armv7_common.env => ti_common.env} (71%)
>
> --
> 2.40.0
More information about the U-Boot
mailing list