[PATCH] pinctrl: sunxi: add SPI1 pinmuxes for f1c100s

[Andre Przywara]

On Wed, 23 Aug 2023 14:47:16 +0800
Iota Hydrae <writeforever at foxmail.com> wrote:

Hi,

> SPI1 is also usable on port A.
> 
> But there's nothing about SPI1 pinmux there for now.
> 
> This should be set when you are using SPI1.
> 
> According to the manual, the mux value would be 6.

So technically that looks alright, but what do you need that for? We
try to not add pinmux values to that table unless they are used
somewhere, especially if there are potential conflicting values: SPI1
on PE is on pinmux 4.
So do you have a board that needs that? Any chance you could upstream
the DT (to the kernel list!) and defconfig for that board? That would
it make it a no-brainer to merge this patch.

Cheers,
Andre

> Signed-off-by: Iota Hydrae <writeforever at foxmail.com>
> ---
>  drivers/pinctrl/sunxi/pinctrl-sunxi.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index e5102180902..c448e40ab07 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -240,6 +240,7 @@ static const struct sunxi_pinctrl_function suniv_f1c100s_pinctrl_functions[] = {
>  	{ "mmc0",	2 },	/* PF0-PF5 */
>  	{ "mmc1",	3 },	/* PC0-PC2 */
>  	{ "spi0",	2 },	/* PC0-PC3 */
> +	{ "spi1",	6 },	/* PA0-PA3 */
>  #if IS_ENABLED(CONFIG_UART0_PORT_F)
>  	{ "uart0",	3 },	/* PF2-PF4 */
>  #else