[PATCH v1 2/2] board: verdin-am62: fix check for minimum memory size

[Francesco Dolcini]

Hello Nishanth,

On Thu, Aug 24, 2023 at 07:14:12AM -0500, Nishanth Menon wrote:
> On 10:08-20230824, Emanuele Ghidoli wrote:
> > From: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
> > 
> > verdin am62 SKUs comes in multiple memory configuration, check that
> > the detected memory is at least 512MB since we have some
> > reserved memory just before this threshold and therefore
> > the module cannot work with less memory.
> > 
> > Fixes: 7d1a10659f5b ("board: toradex: add verdin am62 support")
> > Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli at toradex.com>
> > ---
> >  board/toradex/verdin-am62/verdin-am62.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/board/toradex/verdin-am62/verdin-am62.c b/board/toradex/verdin-am62/verdin-am62.c
> > index a3d1d07a0cbf..d09dda5bccc9 100644
> > --- a/board/toradex/verdin-am62/verdin-am62.c
> > +++ b/board/toradex/verdin-am62/verdin-am62.c
> > @@ -28,8 +28,8 @@ int dram_init(void)
> >  {
> >  	gd->ram_size = get_ram_size((long *)CFG_SYS_SDRAM_BASE, CFG_SYS_SDRAM_SIZE);
> >  
> > -	if (gd->ram_size < SZ_64M)
> > -		puts("## WARNING: Less than 64MB RAM detected\n");
> > +	if (gd->ram_size < SZ_512M)
> > +		puts("## WARNING: Less than 512MB RAM detected\n");
> 
> Have you considered fdtdec_setup_mem_size_base
> fdtdec_setup_memory_banksize  - in which case the reserved memory
> regions can be changed in dt (will need corresponding custom binaries
> ofcourse)..

I would say that custom binaries is not something we want. Our goal is
to rely on whatever TI is providing and to not deviate from it unless
required. Luckily enough for the moment it works since our
minimum memory size is 512MB.

Francesco