[PATCH] Convert CFG_SYS_UBOOT_START to Kconfig

Tom Rini trini at konsulko.com
Fri Aug 25 00:45:35 CEST 2023


On Thu, Aug 24, 2023 at 06:40:09PM -0400, Jesse T wrote:
> On Thu, Aug 24, 2023 at 4:01 PM Simon Glass <sjg at chromium.org> wrote:
> >
> > Hi Jesse,
> >
> > On Wed, 23 Aug 2023 at 20:30, Jesse Taube <mr.bossman075 at gmail.com> wrote:
> > >
> > > Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
> > > renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
> > > this meant that the value was no longer available to the Makefile. This
> > > caused imxrt to fail to boot. All the other boards that used this
> > > variable were unaffected because they were using the default value
> > > which is CONFIG_TEXT_BASE.
> > >
> > > This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
> > > value to CONFIG_TEXT_BASE.
> > >
> > > Suggested-by: Marek Vasut <marek.vasut+renesas at gmail.com>
> > > Suggested-by: Tom Rini <trini at konsulko.com>
> > > Signed-off-by: Jesse Taube <Mr.Bossman075 at gmail.com>
> > > ---
> > >  Makefile                                       | 16 ++++------------
> > >  arch/arm/mach-k3/config_secure.mk              |  2 +-
> > >  arch/arm/mach-omap2/config_secure.mk           |  2 +-
> > >  boot/Kconfig                                   | 16 ++++++++++++++++
> > >  common/spl/spl.c                               |  6 +-----
> > >  common/spl/spl_fit.c                           |  2 +-
> > >  configs/imxrt1020-evk_defconfig                |  2 ++
> > >  configs/imxrt1050-evk_defconfig                |  2 ++
> > >  configs/imxrt1170-evk_defconfig                |  2 ++
> > >  include/configs/gardena-smart-gateway-mt7688.h |  4 ----
> > >  include/configs/imxrt1020-evk.h                |  6 ------
> > >  include/configs/imxrt1050-evk.h                |  6 ------
> > >  include/configs/imxrt1170-evk.h                |  3 ---
> > >  include/configs/linkit-smart-7688.h            |  4 ----
> > >  include/configs/mt7620.h                       |  3 ---
> > >  include/configs/mt7628.h                       |  3 ---
> > >  include/configs/mt8512.h                       |  2 --
> > >  include/configs/vocore2.h                      |  4 ----
> > >  include/spl.h                                  |  2 +-
> > >  19 files changed, 31 insertions(+), 56 deletions(-)
> > >
> > > diff --git a/Makefile b/Makefile
> > > index 9b90204bfe..13d4c63439 100644
> > > --- a/Makefile
> > > +++ b/Makefile
> > > @@ -1364,14 +1364,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
> > >  u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
> > >         $(call if_changed,objcopy)
> > >
> > > -#
> > > -# U-Boot entry point, needed for booting of full-blown U-Boot
> > > -# from the SPL U-Boot version.
> > > -#
> > > -ifndef CFG_SYS_UBOOT_START
> > > -CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
> > > -endif
> > > -
> > >  # Boards with more complex image requirements can provide an .its source file
> > >  # or a generator script
> > >  # NOTE: Please do not use this. We are migrating away from Makefile rules to use
> > > @@ -1391,7 +1383,7 @@ endif
> > >
> > >  ifdef CONFIG_SPL_LOAD_FIT
> > >  MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
> > > -       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
> > > +       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> > >         -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
> > >         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
> > >         $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
> > > @@ -1399,10 +1391,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
> > >         $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
> > >  else
> > >  MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
> > > -       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
> > > +       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> > >         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
> > >  MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
> > > -       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
> > > +       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> > >         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
> > >  u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
> > >  endif
> > > @@ -1433,7 +1425,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
> > >  UBOOT_BIN := u-boot.bin
> > >
> > >  MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
> > > -       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
> > > +       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> > >         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
> > >
> > >  u-boot.bin.lzma: u-boot.bin FORCE
> > > diff --git a/arch/arm/mach-k3/config_secure.mk b/arch/arm/mach-k3/config_secure.mk
> > > index 7bc8af813a..9cc1f9eb24 100644
> > > --- a/arch/arm/mach-k3/config_secure.mk
> > > +++ b/arch/arm/mach-k3/config_secure.mk
> > > @@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(
> > >         $(call if_changed,mkfitimage)
> > >
> > >  MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
> > > -       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
> > > +       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> > >         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
> > >         $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
> > >
> > > diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk
> > > index 24ddcdb961..f76262bb0c 100644
> > > --- a/arch/arm/mach-omap2/config_secure.mk
> > > +++ b/arch/arm/mach-omap2/config_secure.mk
> > > @@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
> > >  ifdef CONFIG_SPL_LOAD_FIT
> > >
> > >  MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
> > > -       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
> > > +       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
> > >         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
> > >         $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
> > >
> > > diff --git a/boot/Kconfig b/boot/Kconfig
> > > index 5e2d4286ae..f2f7821cc1 100644
> > > --- a/boot/Kconfig
> > > +++ b/boot/Kconfig
> > > @@ -737,6 +737,22 @@ config TEXT_BASE
> > >         default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
> > >         default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
> > >         hex "Text Base"
> > > +       help
> > > +         The address in memory that U-Boot will be copied from, initially.
> > > +
> > > +config HAVE_SYS_UBOOT_START
> > > +       bool
> > > +       depends on HAVE_TEXT_BASE
> > > +       prompt "Use custom U-Boot Start"
> > > +       help
> > > +         By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the
> > > +         entry point are the same. Select this to set a different U-Boot start address.
> >
> > space after 'from'
> >
> > Also this is a little unclear. START means the start address that
> > U-Boot will run from. If it is different from TEXT_BASE, then
> > something loads it here
> >
> > This could do with a bit more detail.
> 
> Yes, it is and why I edited the TEXT_BASE help prompt.
> I'm not sure how to word that this is where the SPL will start
> execution after the jump.
> TEXT_BASE is where the spl will copy the binary to.
> 
> >
> > > +
> > > +config SYS_UBOOT_START
> > > +       hex
> > > +       depends on HAVE_TEXT_BASE
> > > +       default TEXT_BASE
> > > +       prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
> > Tom:
> > This is clever, and can be kept.  I didn't catch at first that this will
> > do what I was hoping of setting a default, but then allowing for it to
> > be changed.
> 
> Was there another way of doing this? I looked at the docs for a while
> to figure this out.

This part here is mechanically correct.  Just need a slight wording
change to the help to better explain what / why one wants to adjust the
address.  Why are these platforms needing start != text?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230824/a3f4672a/attachment-0001.sig>


More information about the U-Boot mailing list