[PATCH v2 2/6] board: phytec: common: Add imx8m specific EEPROM detection support

Yannic Moog Y.Moog at phytec.de
Mon Aug 28 14:32:30 CEST 2023


On Thu, 2023-08-17 at 10:57 +0200, Teresa Remmet wrote:
> Add imx8m specific detection part. Which includes checking the
> EEPROM data for article number options.
> 
> Signed-off-by: Teresa Remmet <t.remmet at phytec.de>

Reviewed-by: Yannic Moog <y.moog at phytec.de>
Tested-by: Yannic Moog <y.moog at phytec.de>

> ---
> Changes in v2:
> - remove blank line at EOF
> - fix string conversion to integer
> - fix typo s/revsions/revisions
> ---
>  board/phytec/common/Kconfig               |   8 ++
>  board/phytec/common/Makefile              |   1 +
>  board/phytec/common/imx8m_som_detection.c | 168
> ++++++++++++++++++++++
>  board/phytec/common/imx8m_som_detection.h |  54 +++++++
>  4 files changed, 231 insertions(+)
>  create mode 100644 board/phytec/common/imx8m_som_detection.c
>  create mode 100644 board/phytec/common/imx8m_som_detection.h
> 
> diff --git a/board/phytec/common/Kconfig b/board/phytec/common/Kconfig
> index d614d45b1d60..3b1c5aa0d02b 100644
> --- a/board/phytec/common/Kconfig
> +++ b/board/phytec/common/Kconfig
> @@ -3,3 +3,11 @@ config PHYTEC_SOM_DETECTION
>         select SPL_CRC8 if SPL
>         help
>            Support of I2C EEPROM based SoM detection.
> +
> +config PHYTEC_IMX8M_SOM_DETECTION
> +       bool "Support SoM detection for i.MX8M PHYTEC platforms"
> +       depends on ARCH_IMX8M && PHYTEC_SOM_DETECTION
> +       default y
> +       help
> +         Support of I2C EEPROM based SoM detection. Supported
> +         for PHYTEC i.MX8MM/i.MX8MP boards
> diff --git a/board/phytec/common/Makefile
> b/board/phytec/common/Makefile
> index 5fe8725ef684..fe28964ce21c 100644
> --- a/board/phytec/common/Makefile
> +++ b/board/phytec/common/Makefile
> @@ -8,3 +8,4 @@ obj- := __dummy__.o
>  endif
>  
>  obj-$(CONFIG_PHYTEC_SOM_DETECTION) += phytec_som_detection.o
> +obj-$(CONFIG_PHYTEC_IMX8M_SOM_DETECTION) += imx8m_som_detection.o
> diff --git a/board/phytec/common/imx8m_som_detection.c
> b/board/phytec/common/imx8m_som_detection.c
> new file mode 100644
> index 000000000000..c6c96ed19cb3
> --- /dev/null
> +++ b/board/phytec/common/imx8m_som_detection.c
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Teresa Remmet <t.remmet at phytec.de>
> + */
> +
> +#include <common.h>
> +#include <asm/arch/sys_proto.h>
> +#include <dm/device.h>
> +#include <dm/uclass.h>
> +#include <i2c.h>
> +#include <u-boot/crc.h>
> +
> +#include "imx8m_som_detection.h"
> +
> +extern struct phytec_eeprom_data eeprom_data;
> +
> +/* Check if the SoM is actually one of the following products:
> + * - i.MX8MM
> + * - i.MX8MN
> + * - i.MX8MP
> + * - i.MX8MQ
> + *
> + * Returns 0 in case it's a known SoM. Otherwise, returns -1.
> + */
> +u8 __maybe_unused phytec_imx8m_detect(struct phytec_eeprom_data
> *data)
> +{
> +       char *opt;
> +       u8 som;
> +
> +       /* We can not do the check for early API revisions */
> +       if (data->api_rev < PHYTEC_API_REV2)
> +               return -1;
> +
> +       if (!data)
> +               data = &eeprom_data;
> +
> +       som = data->data.data_api2.som_no;
> +       debug("%s: som id: %u\n", __func__, som);
> +
> +       opt = phytec_get_opt(data);
> +       if (!opt)
> +               return -1;
> +
> +       if (som == PHYTEC_IMX8MP_SOM && is_imx8mp())
> +               return 0;
> +
> +       if (som == PHYTEC_IMX8MM_SOM) {
> +               if ((PHYTEC_GET_OPTION(opt[0]) != 0) &&
> +                   (PHYTEC_GET_OPTION(opt[1]) == 0) && is_imx8mm())
> +                       return 0;
> +               else if ((PHYTEC_GET_OPTION(opt[0]) == 0) &&
> +                        (PHYTEC_GET_OPTION(opt[1]) != 0) &&
> is_imx8mn())
> +                       return 0;
> +       }
> +
> +       if (som == PHYTEC_IMX8MQ_SOM && is_imx8mq())
> +               return 0;
> +
> +       pr_err("%s: SoM ID does not match. Wrong EEPROM data?\n",
> __func__);
> +       return -1;
> +}
> +
> +/*
> + * All PHYTEC i.MX8M boards have RAM size definition at the
> + * same location.
> + */
> +u8 __maybe_unused phytec_get_imx8m_ddr_size(struct phytec_eeprom_data
> *data)
> +{
> +       char *opt;
> +       u8 ddr_id;
> +
> +       if (!data)
> +               data = &eeprom_data;
> +
> +       opt = phytec_get_opt(data);
> +       if (opt)
> +               ddr_id = PHYTEC_GET_OPTION(opt[2]);
> +       else
> +               ddr_id = PHYTEC_EEPROM_INVAL;
> +
> +       debug("%s: ddr id: %u\n", __func__, ddr_id);
> +       return ddr_id;
> +}
> +
> +/*
> + * Filter SPI-NOR flash information. All i.MX8M boards have this at
> + * the same location.
> + * returns: 0x0 if no SPI is populated. Otherwise a board depended
> + * code for the size. PHYTEC_EEPROM_INVAL when the data is invalid.
> + */
> +u8 __maybe_unused phytec_get_imx8m_spi(struct phytec_eeprom_data
> *data)
> +{
> +       char *opt;
> +       u8 spi;
> +
> +       if (!data)
> +               data = &eeprom_data;
> +
> +       if (data->api_rev < PHYTEC_API_REV2)
> +               return PHYTEC_EEPROM_INVAL;
> +
> +       opt = phytec_get_opt(data);
> +       if (opt)
> +               spi = PHYTEC_GET_OPTION(opt[4]);
> +       else
> +               spi = PHYTEC_EEPROM_INVAL;
> +
> +       debug("%s: spi: %u\n", __func__, spi);
> +       return spi;
> +}
> +
> +/*
> + * Filter ethernet phy information. All i.MX8M boards have this at
> + * the same location.
> + * returns: 0x0 if no ethernet phy is populated. 0x1 if it is
> populated.
> + * PHYTEC_EEPROM_INVAL when the data is invalid.
> + */
> +u8 __maybe_unused phytec_get_imx8m_eth(struct phytec_eeprom_data
> *data)
> +{
> +       char *opt;
> +       u8 eth;
> +
> +       if (!data)
> +               data = &eeprom_data;
> +
> +       if (data->api_rev < PHYTEC_API_REV2)
> +               return PHYTEC_EEPROM_INVAL;
> +
> +       opt = phytec_get_opt(data);
> +       if (opt) {
> +               eth = PHYTEC_GET_OPTION(opt[5]);
> +               eth &= 0x1;
> +       } else {
> +               eth = PHYTEC_EEPROM_INVAL;
> +       }
> +
> +       debug("%s: eth: %u\n", __func__, eth);
> +       return eth;
> +}
> +
> +/*
> + * Filter RTC information for phyCORE-i.MX8MP.
> + * returns: 0 if no RTC is populated. 1 if it is populated.
> + * PHYTEC_EEPROM_INVAL when the data is invalid.
> + */
> +u8 __maybe_unused phytec_get_imx8mp_rtc(struct phytec_eeprom_data
> *data)
> +{
> +       char *opt;
> +       u8 rtc;
> +
> +       if (!data)
> +               data = &eeprom_data;
> +
> +       if (data->api_rev < PHYTEC_API_REV2)
> +               return PHYTEC_EEPROM_INVAL;
> +
> +       opt = phytec_get_opt(data);
> +       if (opt) {
> +               rtc = PHYTEC_GET_OPTION(opt[5]);
> +               rtc &= 0x4;
> +               rtc = !(rtc >> 2);
> +       } else {
> +               rtc = PHYTEC_EEPROM_INVAL;
> +       }
> +       debug("%s: rtc: %u\n", __func__, rtc);
> +       return rtc;
> +}
> diff --git a/board/phytec/common/imx8m_som_detection.h
> b/board/phytec/common/imx8m_som_detection.h
> new file mode 100644
> index 000000000000..88d3037bf363
> --- /dev/null
> +++ b/board/phytec/common/imx8m_som_detection.h
> @@ -0,0 +1,54 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Teresa Remmet <t.remmet at phytec.de>
> + */
> +
> +#ifndef _PHYTEC_IMX8M_SOM_DETECTION_H
> +#define _PHYTEC_IMX8M_SOM_DETECTION_H
> +
> +#include "phytec_som_detection.h"
> +
> +#define PHYTEC_IMX8MQ_SOM       66
> +#define PHYTEC_IMX8MM_SOM       69
> +#define PHYTEC_IMX8MP_SOM       70
> +
> +#if IS_ENABLED(CONFIG_PHYTEC_IMX8M_SOM_DETECTION)
> +
> +u8 __maybe_unused phytec_imx8m_detect(struct phytec_eeprom_data
> *data);
> +u8 __maybe_unused phytec_get_imx8m_ddr_size(struct phytec_eeprom_data
> *data);
> +u8 __maybe_unused phytec_get_imx8mp_rtc(struct phytec_eeprom_data
> *data);
> +u8 __maybe_unused phytec_get_imx8m_spi(struct phytec_eeprom_data
> *data);
> +u8 __maybe_unused phytec_get_imx8m_eth(struct phytec_eeprom_data
> *data);
> +
> +#else
> +
> +inline u8 __maybe_unused phytec_imx8m_detect(struct
> phytec_eeprom_data *data)
> +{
> +       return -1;
> +}
> +
> +inline u8 __maybe_unused
> +phytec_get_imx8m_ddr_size(struct phytec_eeprom_data *data)
> +{
> +       return PHYTEC_EEPROM_INVAL;
> +}
> +
> +inline u8 __maybe_unused phytec_get_imx8mp_rtc(struct
> phytec_eeprom_data *data)
> +{
> +       return PHYTEC_EEPROM_INVAL;
> +}
> +
> +inline u8 __maybe_unused phytec_get_imx8m_spi(struct
> phytec_eeprom_data *data)
> +{
> +       return PHYTEC_EEPROM_INVAL;
> +}
> +
> +inline u8 __maybe_unused phytec_get_imx8m_eth(struct
> phytec_eeprom_data *data)
> +{
> +       return PHYTEC_EEPROM_INVAL;
> +}
> +
> +#endif /* IS_ENABLED(CONFIG_PHYTEC_IMX8M_SOM_DETECTION) */
> +
> +#endif /* _PHYTEC_IMX8M_SOM_DETECTION_H */



More information about the U-Boot mailing list