[PATCH v2 2/6] arm: mach-k3: j721s2: Add mcu_timer0 id to the dev list

[Nishanth Menon]

On 16:47-20230825, Manorit Chawdhry wrote:
> mcu_timer0 is used by u-boot as the tick-timer. Add it to the soc
> devices lsit so it an be enabled via the k3 power controller.
> 
> Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>

> ---
>  arch/arm/mach-k3/j721s2/dev-data.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/mach-k3/j721s2/dev-data.c b/arch/arm/mach-k3/j721s2/dev-data.c
> index 8c999a3c5a8b..df70c5e5d7c0 100644
> --- a/arch/arm/mach-k3/j721s2/dev-data.c
> +++ b/arch/arm/mach-k3/j721s2/dev-data.c
> @@ -47,6 +47,7 @@ static struct ti_lpsc soc_lpsc_list[] = {
>  };
>  
>  static struct ti_dev soc_dev_list[] = {
> +	PSC_DEV(35, &soc_lpsc_list[0]),

Reviewed that mcu_timer0 with device ID 35 maps to LPSC_wkup_alwayson
which maps to index 0.

Reviewed-by: Nishanth Menon <nm at ti.com>

>  	PSC_DEV(108, &soc_lpsc_list[0]),
>  	PSC_DEV(109, &soc_lpsc_list[0]),
>  	PSC_DEV(110, &soc_lpsc_list[0]),
> 
> -- 
> 2.41.0
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D