[PATCH v1 2/2] doc: board: toradex: verdin-am62: document update u-boot wrapper

[Heinrich Schuchardt]

On 8/29/23 00:01, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
> Now with the update U-Boot wrappers having been sorted out, document
> their usage.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
> ---
>
>   doc/board/toradex/verdin-am62.rst | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
>
> diff --git a/doc/board/toradex/verdin-am62.rst b/doc/board/toradex/verdin-am62.rst
> index ecc7e0777cb..e8d90273288 100644
> --- a/doc/board/toradex/verdin-am62.rst
> +++ b/doc/board/toradex/verdin-am62.rst
> @@ -74,6 +74,20 @@ Flash to eMMC
>       => fatload mmc 1 ${loadaddr} u-boot.img
>       => mmc write ${loadaddr} 0x1400 0x2000
>
> +As a convenience, instead of having to remember all those addresses and sizes,
> +one may also use the update U-Boot wrappers:
> +
> +.. code-block:: bash
> +
> +    > tftpboot ${loadaddr} tiboot3-am62x-gp-verdin.bin
> +    > run update_tiboot3

I wonder what the prompt '>' refers to. The rest of the document uses
'=>' as U-Boot prompt.

To make copying easier consider using

.. prompt:: bash =>

The html rendered page will contain a => before each line but you would
not need to type it here.

Best regards

Heinrich

> +
> +    > tftpboot ${loadaddr} tispl.bin
> +    > run update_tispl
> +
> +    > tftpboot ${loadaddr} u-boot.img
> +    > run update_uboot
> +
>   Boot
>   ----
>