[PATCH v2 0/5] at91: sam9x60-curiosity: Misc improvements

[Eugen Hristev]

On 8/23/23 16:58, Alexander Dahl wrote:
> Hei hei,
> 
> while working with the sam9x60-curiosity board I noticed some things
> still have rough edges on U-Boot shell for that device.  With these
> patches (and some more config options enabled), the following commands
> now work as expected: reset, led, button.
> 
> The whole series is based on atmel/next.
> 
> Note: some things here might be useful to implement for other Microchip
> boards.  However I currently only have this one board, and I'm not sure
> if this is a direction appreciated by Microchip?  So you might see all
> this as suggestion.

It is appreciated by me, so thank you !

Applied to u-boot-at91/next


> 
> See notes on patches for specific changes from v1 to v2 and below for
> summary of the changes.
> 
> Greets
> Alex
> 
> v1 -> v2:
>    - reworded some commit messages
>    - reenabled CONFIG_SYSRESET and CONFIG_SYSRESET_AT91
>    - split up LED patch in two new patches
> 
> Alexander Dahl (5):
>    configs: at91: sam9x60_curiosity: Sync both defconfig variants
>    configs: at91: sam9x60: Switch to new reset driver
>    ARM: dts: at91: sam9x60-curiosity: Sync LED nodes from Linux
>    board: sam9x60-curiosity: Let LED subsystem init leds if enabled
>    ARM: dts: at91: sam9x60-curiosity: Sync gpio button from Linux
> 
>   .../dts/at91-sam9x60_curiosity-u-boot.dtsi    | 18 +++++++
>   arch/arm/dts/at91-sam9x60_curiosity.dts       | 50 +++++++++++++++++++
>   .../sam9x60_curiosity/sam9x60_curiosity.c     | 18 +++++++
>   configs/sam9x60_curiosity_mmc1_defconfig      |  2 +
>   configs/sam9x60_curiosity_mmc_defconfig       | 17 ++++++-
>   configs/sam9x60ek_mmc_defconfig               |  2 +
>   configs/sam9x60ek_nandflash_defconfig         |  2 +
>   configs/sam9x60ek_qspiflash_defconfig         |  2 +
>   8 files changed, 110 insertions(+), 1 deletion(-)
> 
> 
> base-commit: 0498ff933813932ff057cdc314ab46df4a596d06