[RFX PATCH 0/9] Universal Payload initial series

[Heinrich Schuchardt]

Am 31. August 2023 01:28:37 MESZ schrieb Simon Glass <sjg at chromium.org>:
>Universal Payload (UPL) is an upcoming Industry Standard for firmware
>components. UPL is designed to improve interoperability within the
>firmware industry, allowing mixing and matching of projects with less
>friction and fewer project-specific implementations. UPL is
>cross-platform, supporting ARM, x86 and RISC-V initially.
>
>This series provides some initial support for this, for comment only.
>
>
>Simon Glass (9):
>  upl: Add support for reading a upl handoff
>  upl: Add support for writing a upl handoff
>  upl: Add basic tests
>  upl: Add a command
>  upl: Add support for Universal Payload in SPL
>  spl: Plumb in the Universal Payload handoff
>  Plumb in universal payload to the init process
>  sandbox_vpl: Enable Universal Payload
>  upl: Add initial documentation
>
> boot/Kconfig                      |  72 +++-
> boot/Makefile                     |   4 +
> boot/upl_common.c                 |  51 +++
> boot/upl_common.h                 |  24 ++
> boot/upl_read.c                   | 607 +++++++++++++++++++++++++++++
> boot/upl_write.c                  | 623 ++++++++++++++++++++++++++++++
> cmd/Kconfig                       |   7 +
> cmd/Makefile                      |   1 +
> cmd/upl.c                         |  99 +++++
> common/board_f.c                  |  22 ++
> common/board_r.c                  |   2 +
> common/spl/Makefile               |   2 +
> common/spl/spl.c                  |   6 +
> common/spl/spl_fit.c              |  22 ++
> common/spl/spl_upl.c              | 153 ++++++++
> configs/sandbox_defconfig         |   6 +-
> configs/sandbox_vpl_defconfig     |   4 +
> doc/usage/cmd/upl.rst             | 149 +++++++
> doc/usage/index.rst               |   2 +
> doc/usage/upl.rst                 |  27 ++

/doc/usage/spl_boot.rst should be updated, too.

Best regards

Heinrich


> include/asm-generic/global_data.h |  15 +
> include/spl.h                     |  11 +
> include/upl.h                     | 361 +++++++++++++++++
> test/boot/Makefile                |   2 +
> test/boot/upl.c                   | 457 ++++++++++++++++++++++
> test/py/tests/test_upl.py         |  25 ++
> 26 files changed, 2750 insertions(+), 4 deletions(-)
> create mode 100644 boot/upl_common.c
> create mode 100644 boot/upl_common.h
> create mode 100644 boot/upl_read.c
> create mode 100644 boot/upl_write.c
> create mode 100644 cmd/upl.c
> create mode 100644 common/spl/spl_upl.c
> create mode 100644 doc/usage/cmd/upl.rst
> create mode 100644 doc/usage/upl.rst
> create mode 100644 include/upl.h
> create mode 100644 test/boot/upl.c
> create mode 100644 test/py/tests/test_upl.py
>