[PATCH v5 8/8] cmd: gpt: Add command to swap partition order
Joshua Watt
jpewhacker at gmail.com
Thu Aug 31 18:51:41 CEST 2023
Adds a command called "gpt transpose" which will swap the order two
partition table entries in the GPT partition table (but leaves them
pointing to the same locations on disk).
This can be useful for swapping bootloaders in systems that use an A/B
partitioning scheme where the bootrom is hard coded to look for the
bootloader in a specific index in the GPT partition table.
Signed-off-by: Joshua Watt <JPEWhacker at gmail.com>
---
cmd/gpt.c | 46 ++++++++++++++++++++++++++++++++++++---
doc/usage/cmd/gpt.rst | 25 +++++++++++++++++++++
test/py/tests/test_gpt.py | 19 ++++++++++++++++
3 files changed, 87 insertions(+), 3 deletions(-)
diff --git a/cmd/gpt.c b/cmd/gpt.c
index 927b6afa68..58b2c904a1 100644
--- a/cmd/gpt.c
+++ b/cmd/gpt.c
@@ -858,8 +858,9 @@ static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm,
u8 part_count = 0;
int partlistlen, ret, numparts = 0, partnum, i = 1, ctr1 = 0, ctr2 = 0;
- if ((subcomm == NULL) || (name1 == NULL) || (name2 == NULL) ||
- (strcmp(subcomm, "swap") && (strcmp(subcomm, "rename"))))
+ if (!subcomm || !name1 || !name2 ||
+ (strcmp(subcomm, "swap") && strcmp(subcomm, "rename") &&
+ strcmp(subcomm, "transpose")))
return -EINVAL;
ret = get_disk_guid(dev_desc, disk_guid);
@@ -920,6 +921,41 @@ static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm,
ret = -EINVAL;
goto out;
}
+ } else if (!strcmp(subcomm, "transpose")) {
+ int idx1, idx2;
+ struct disk_partition* first = NULL;
+ struct disk_partition* second= NULL;
+ struct disk_partition tmp_part;
+
+ idx1 = simple_strtoul(name1, NULL, 10);
+ idx2 = simple_strtoul(name2, NULL, 10);
+ if (idx1 == idx2) {
+ printf("Cannot swap partition with itself\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ list_for_each(pos, &disk_partitions) {
+ curr = list_entry(pos, struct disk_part, list);
+ if (curr->partnum == idx1)
+ first = &curr->gpt_part_info;
+ else if (curr->partnum == idx2)
+ second = &curr->gpt_part_info;
+ }
+ if (!first) {
+ printf("Illegal partition number %s\n", name1);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (!second) {
+ printf("Illegal partition number %s\n", name2);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ tmp_part = *first;
+ *first = *second;
+ *second = tmp_part;
} else { /* rename */
if (strlen(name2) > PART_NAME_LEN) {
printf("Names longer than %d characters are truncated.\n", PART_NAME_LEN);
@@ -1123,7 +1159,8 @@ static int do_gpt(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
} else if (strcmp(argv[1], "read") == 0) {
ret = do_get_gpt_info(blk_dev_desc, (argc == 5) ? argv[4] : NULL);
} else if ((strcmp(argv[1], "swap") == 0) ||
- (strcmp(argv[1], "rename") == 0)) {
+ (strcmp(argv[1], "rename") == 0) ||
+ (strcmp(argv[1], "transpose") == 0)) {
ret = do_rename_gpt_parts(blk_dev_desc, argv[1], argv[4], argv[5]);
} else if ((strcmp(argv[1], "set-bootable") == 0)) {
ret = gpt_set_bootable(blk_dev_desc, argv[4]);
@@ -1176,6 +1213,8 @@ U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt,
" gpt swap <interface> <dev> <name1> <name2>\n"
" - change all partitions named name1 to name2\n"
" and vice-versa\n"
+ " gpt transpose <interface> <dev> <part1> <part2>\n"
+ " - Swap the order of the entries for part1 and part2 in the partition table\n"
" gpt rename <interface> <dev> <part> <name>\n"
" - rename the specified partition\n"
" gpt set-bootable <interface> <dev> <list>\n"
@@ -1184,5 +1223,6 @@ U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt,
" gpt swap mmc 0 foo bar\n"
" gpt rename mmc 0 3 foo\n"
" gpt set-bootable mmc 0 boot_a,boot_b\n"
+ " gpt transpose mmc 0 1 2\n"
#endif
);
diff --git a/doc/usage/cmd/gpt.rst b/doc/usage/cmd/gpt.rst
index 288dd365c0..f6115ecb0e 100644
--- a/doc/usage/cmd/gpt.rst
+++ b/doc/usage/cmd/gpt.rst
@@ -16,6 +16,7 @@ Synopsis
gpt set-bootable <interface> <dev> <partition list>
gpt setenv <interface> <dev> <partition name>
gpt swap <interface> <dev> <name1> <name2>
+ gpt transpose <interface> <dev> <part1> <part2>
gpt verify <interface> <dev> [<partition string>]
gpt write <interface> <dev> <partition string>
@@ -126,6 +127,13 @@ Changes the names of all partitions that are named 'name1' to be 'name2', and
all partitions named 'name2' to be 'name1'. CONFIG_CMD_GPT_RENAME=y is
required.
+gpt transpose
+~~~~~~~~~~~~~
+
+Swaps the order of two partition table entries with indexes 'part1' and 'part2'
+in the partition table, but otherwise leaves the actual partition data
+untouched.
+
gpt verify
~~~~~~~~~~
@@ -199,3 +207,20 @@ Get the GUID for a disk::
Set the bootable flag for the 'boot' partition and clear it for all others::
=> gpt set-bootable mmc 0 boot
+
+Swap the order of the 'boot' and 'rootfs' partition table entries::
+ => gpt setenv mmc 0 rootfs
+ => echo ${gpt_partition_entry}
+ 2
+ => gpt setenv mmc 0 boot
+ => echo ${gpt_partition_entry}
+ 1
+
+ => gpt transpose mmc 0 1 2
+
+ => gpt setenv mmc 0 rootfs
+ => echo ${gpt_partition_entry}
+ 1
+ => gpt setenv mmc 0 boot
+ => echo ${gpt_partition_entry}
+ 2
diff --git a/test/py/tests/test_gpt.py b/test/py/tests/test_gpt.py
index b4c03bc3a2..6e135b663e 100644
--- a/test/py/tests/test_gpt.py
+++ b/test/py/tests/test_gpt.py
@@ -329,3 +329,22 @@ def test_gpt_write(state_disk_image, u_boot_console):
assert '0x00001000 0x00001bff "second"' in output
output = u_boot_console.run_command('gpt guid host 0')
assert '375a56f7-d6c9-4e81-b5f0-09d41ca89efe' in output
+
+ at pytest.mark.buildconfigspec('cmd_gpt')
+ at pytest.mark.buildconfigspec('cmd_gpt_rename')
+ at pytest.mark.buildconfigspec('cmd_part')
+ at pytest.mark.requiredtool('sgdisk')
+def test_gpt_transpose(state_disk_image, u_boot_console):
+ """Test the gpt transpose command."""
+
+ u_boot_console.run_command('host bind 0 ' + state_disk_image.path)
+ output = u_boot_console.run_command('part list host 0')
+ assert '1\t0x00000800\t0x00000fff\t"part1"' in output
+ assert '2\t0x00001000\t0x00001bff\t"part2"' in output
+
+ output = u_boot_console.run_command('gpt transpose host 0 1 2')
+ assert 'success!' in output
+
+ output = u_boot_console.run_command('part list host 0')
+ assert '2\t0x00000800\t0x00000fff\t"part1"' in output
+ assert '1\t0x00001000\t0x00001bff\t"part2"' in output
--
2.34.1
More information about the U-Boot
mailing list