[PATCH 03/14] bootm: Make OS booting dependent on BOOTM

[Simon Glass]

Booting an OS does not require the 'bootm' command, so change the
condition for these options.

Move them into boot/ so they don't depend on CMDLINE

Note that CMD_BOOTM_PRE_LOAD has been put directly into the bootm code
so will need some additional refactoring (and a test!) to allow it to
change over.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 boot/Kconfig | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 cmd/Kconfig  | 49 -------------------------------------------------
 2 files changed, 49 insertions(+), 49 deletions(-)

diff --git a/boot/Kconfig b/boot/Kconfig
index 8b32a51f7e7c..9fa8789bc2b1 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -689,6 +689,55 @@ config BOOTM
 	  This option should normally be enabled. It is used to implement the
 	  'bootm' command.
 
+config BOOTM_LINUX
+	bool "Support booting Linux OS images"
+	depends on BOOTM || CMD_BOOTZ || CMD_BOOTI
+	default y
+	help
+	  Support booting the Linux kernel directly via a command such as bootm
+	  or booti or bootz.
+
+config BOOTM_NETBSD
+	bool "Support booting NetBSD (non-EFI) loader images"
+	depends on BOOTM
+	default y
+	help
+	  Support booting NetBSD via the bootm command.
+
+config BOOTM_OPENRTOS
+	bool "Support booting OPENRTOS / FreeRTOS images"
+	depends on BOOTM
+	help
+	  Support booting OPENRTOS / FreeRTOS via the bootm command.
+
+config BOOTM_OSE
+	bool "Support booting Enea OSE images"
+	depends on (ARM && (ARM64 || CPU_V7A || CPU_V7R) || SANDBOX || PPC || X86)
+	depends on BOOTM
+	help
+	  Support booting Enea OSE images via the bootm command.
+
+config BOOTM_PLAN9
+	bool "Support booting Plan9 OS images"
+	depends on BOOTM
+	default y
+	help
+	  Support booting Plan9 images via the bootm command.
+
+config BOOTM_RTEMS
+	bool "Support booting RTEMS OS images"
+	depends on BOOTM
+	default y
+	help
+	  Support booting RTEMS images via the bootm command.
+
+config BOOTM_VXWORKS
+	bool "Support booting VxWorks OS images"
+	depends on BOOTM
+	default y
+	help
+	  Support booting VxWorks images via the bootm command.
+
 config ANDROID_BOOT_IMAGE
 	bool "Android Boot Images"
 	default y if FASTBOOT
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 74e1950e51fc..758e817e2eae 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -291,48 +291,6 @@ config CMD_BOOTI
 	help
 	  Boot an AArch64 Linux Kernel image from memory.
 
-config BOOTM_LINUX
-	bool "Support booting Linux OS images"
-	depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI
-	default y
-	help
-	  Support booting the Linux kernel directly via a command such as bootm
-	  or booti or bootz.
-
-config BOOTM_NETBSD
-	bool "Support booting NetBSD (non-EFI) loader images"
-	depends on CMD_BOOTM
-	default y
-	help
-	  Support booting NetBSD via the bootm command.
-
-config BOOTM_OPENRTOS
-	bool "Support booting OPENRTOS / FreeRTOS images"
-	depends on CMD_BOOTM
-	help
-	  Support booting OPENRTOS / FreeRTOS via the bootm command.
-
-config BOOTM_OSE
-	bool "Support booting Enea OSE images"
-	depends on (ARM && (ARM64 || CPU_V7A || CPU_V7R) || SANDBOX || PPC || X86)
-	depends on CMD_BOOTM
-	help
-	  Support booting Enea OSE images via the bootm command.
-
-config BOOTM_PLAN9
-	bool "Support booting Plan9 OS images"
-	depends on CMD_BOOTM
-	default y
-	help
-	  Support booting Plan9 images via the bootm command.
-
-config BOOTM_RTEMS
-	bool "Support booting RTEMS OS images"
-	depends on CMD_BOOTM
-	default y
-	help
-	  Support booting RTEMS images via the bootm command.
-
 config CMD_SEAMA
 	bool "Support read SEAMA NAND images"
 	depends on MTD_RAW_NAND
@@ -349,13 +307,6 @@ config CMD_VBE
 	  is used to boot. Updating the parameters is not currently
 	  supported.
 
-config BOOTM_VXWORKS
-	bool "Support booting VxWorks OS images"
-	depends on CMD_BOOTM
-	default y
-	help
-	  Support booting VxWorks images via the bootm command.
-
 config CMD_BOOTEFI
 	bool "bootefi"
 	depends on EFI_LOADER
-- 
2.43.0.rc2.451.g8631bc7472-goog