[PATHv11 26/43] configs/tbs2910_defconfig inc limit

[Maxim Uvarov]

On Tue, 5 Dec 2023 at 21:49, Soeren Moch <smoch at web.de> wrote:

> On 05.12.23 14:15, Maxim Uvarov wrote:
>
> I think I solved the size issue on all the boards.
>
> Key changes:
> 1. remove compilation of original ping.c and tftp.c (tftp had also server
> code, so I will partially bring it back.)
>
> Interesting.
> @Tom: Is there other server code in u-boot, that is enabled by default
> (and can be used to reclaim code space)?
> Fur sure I do not need u-boot to act as server for tftp (maye nfs, others).
>

Maybe I need to be more clear about this. reference to code from tftp.c and
ping.c exist in net.c, test/image/spl_load_net.c, test.dm/dsa.c,
test/dm/eth.c.
And even if that code is not used (replaced with lwip calls to the same
commands in my case) it adds additional size. Even enabled LTO does not see
direct difference.



> 2. LTO=y
> 3. CONFIG_LOGLEVEL=3 instead of 4.
> 4. CONFIG_CMD_DATE is not set
> 5. CONFIG_CMD_LICENSE is not set
> 6. CONFIG_CMD_PING (if 1-6 did not help).
>
> And these changes were enough for CI tagrets to build.
> I also tested that Raspberry PI 4B works fine (dhcp, ping). Looking for
> other boards to test.
>
> For example for this tbs2910 board changes are:
>
> Disabling CMD_DATE is unfortunate. This can help to debug RTC problems
> (already used it for this purpose).
> And, if we are that close to the size limit, than maybe we can get away
> for this series, but for sure will run into trouble for every other small
> change to u-boot core/driver code.
>
> Regards,
> Soeren
>

The problem is that for many targets the limit is 1MB. U-Boot in some
minimal configuration is about 500kb. But U-boot with EFI, USB, Eth
drivers,  MMC, RTC, and all the commands is 900+ kb and very close to 1MB.
Most of the new features are enabled by default. I.e. they do not exist in
_defconfig and appear in the resulting .config automatically.  I would say
that for some small targets things like EFI, Secure boot, TPM, Updates and
many others are not needed. But if new features will appear by default very
soon we will see limits.

BR,
Maxim.

>
> --- a/configs/tbs2910_defconfig
> +++ b/configs/tbs2910_defconfig
> @@ -18,6 +18,7 @@ CONFIG_SYS_MEMTEST_END=0x2f400000
>  CONFIG_LTO=y
>  CONFIG_HAS_BOARD_SIZE_LIMIT=y
>  CONFIG_BOARD_SIZE_LIMIT=392192
> +CONFIG_TIMESTAMP=y (this was added by savedefconfig)
>  # CONFIG_BOOTSTD is not set
>  CONFIG_SUPPORT_RAW_INITRD=y
>  CONFIG_BOOTDELAY=3
> @@ -26,6 +27,7 @@ CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then
> run bootcmd_up2; else r
>  CONFIG_USE_PREBOOT=y
>  CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start"
>  CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
> +CONFIG_LOGLEVEL=3
>  CONFIG_PRE_CONSOLE_BUFFER=y
>  CONFIG_HUSH_PARSER=y
>  CONFIG_SYS_PROMPT="Matrix U-Boot> "
> @@ -52,7 +54,7 @@ CONFIG_CMD_DHCP=y
>  CONFIG_CMD_MII=y
>  CONFIG_CMD_PING=y
>  CONFIG_CMD_CACHE=y
> -CONFIG_CMD_TIME=y
> +# CONFIG_CMD_DATE is not set
>  CONFIG_CMD_SYSBOOT=y
>  # CONFIG_CMD_VIDCONSOLE is not set
>  CONFIG_CMD_EXT2=y
>
> BR,
> Maxim.
>
>
> On Tue, 28 Nov 2023 at 13:09, Maxim Uvarov <maxim.uvarov at linaro.org>
> wrote:
>
>>
>>
>> On Tue, 28 Nov 2023 at 03:20, Soeren Moch <smoch at web.de> wrote:
>>
>>> On 27.11.23 14:11, Tom Rini wrote:
>>> > On Mon, Nov 27, 2023 at 06:57:09PM +0600, Maxim Uvarov wrote:
>>> >
>>> >> Increase allowed binary size to fit lwip code.
>>> >>
>>> >> Signed-off-by: Maxim Uvarov <maxim.uvarov at linaro.org>
>>> >> ---
>>> >>   configs/tbs2910_defconfig | 2 +-
>>> >>   1 file changed, 1 insertion(+), 1 deletion(-)
>>> >>
>>> >> diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
>>> >> index 8fbe84f1d2..ce40efa9ab 100644
>>> >> --- a/configs/tbs2910_defconfig
>>> >> +++ b/configs/tbs2910_defconfig
>>> >> @@ -17,7 +17,7 @@ CONFIG_SYS_MEMTEST_START=0x10000000
>>> >>   CONFIG_SYS_MEMTEST_END=0x2f400000
>>> >>   CONFIG_LTO=y
>>> >>   CONFIG_HAS_BOARD_SIZE_LIMIT=y
>>> >> -CONFIG_BOARD_SIZE_LIMIT=392192
>>> >> +CONFIG_BOARD_SIZE_LIMIT=417792
>>> >>   # CONFIG_BOOTSTD is not set
>>> >>   CONFIG_SUPPORT_RAW_INITRD=y
>>> >>   CONFIG_BOOTDELAY=3
>>> > This is another case where the binary size is a fairly hard limit. You
>>> > forgot to cc the board maintainer here (and I assume the rest of the
>>> > series too) for these config changes.
>>> ThanksTom for sending a notification to me.
>>>
>>> Yes, the CONFIG_BOARD_SIZE_LIMIT is a hard limit and this patch in its
>>> current form will break tbs2910 support and even brick the board for
>>> some configurations. So NAK for this patch.
>>> > I think on this platform it's not
>>> > impossible (like it is on am335x where I just replied) but really
>>> > difficult. I'll let Soeren comment on if switching the network stack to
>>> > lwip is the kind of feature enhancement that warrants the pain of
>>> > dealing with the size change here or not.
>>> Network boot is no important feature for this board and not used in
>>> the default boot configuration. But network support always was part
>>> of the config, may be used by some users, and is at least required
>>> to communicate the ethernet address to linux.
>>>
>>> So I'm not interested in a new network stack for this board, but
>>> also cannot disable network support completely. This seems to be a
>>> problem for this patch series, since networking support implies LWIP
>>> now.
>>>
>>>
>> Thanks Soeren for the explanation. Then yes, something more advanced is
>> needed
>> to be done here.
>>
>>
>>
>>> The question for me is, why is the new network stack consuming so
>>> much space, with only a few enabled commands? Is the whole library
>>> linked in with some unused features (the cover letter mentions much
>>> more than what seems to be used in the converted commands). Or is
>>> the old network stack linked in in parallel to the new one? Can
>>> we save space here?
>>>
>>
>> Yes, the old code is still there. I decided to not touch it for the first
>> integration (arp.o, bootp.o, ping.o and
>> mostly all from net/Makefile).  Those files also have reference code in
>> net/net.c. Not compiling
>> and not linking this code will save some space, but It's larger than the
>> current version.
>> Like for EVM SPL code with usb+net+ext4 and etc have very minimal space
>> for network stack.
>> I will take a look at this more closely...
>>
>>
>>>
>>> NFS support in the old networking code is quite big, enabled by default,
>>> and probably still there in parallel to this new lwip library. If there
>>> is really no other option to save space, and lwip in general is agreed
>>> to be the way forward for U-Boot, and only tbs2910 is blocking that,
>>> then from my point of view disabling NFS for tbs2910 could be a way
>>> to stay within the size limit.
>>>
>>> ok. I think that by default we need something very minimal (dhcp,
>> tftp),  probably ping is even not needed.
>>
>>
>>
>>> Regards,
>>> Soeren
>>>
>>>
>