[PATCH 18/21] dts: msm8916: import DT from Linux
Caleb Connolly
caleb.connolly at linaro.org
Thu Dec 7 20:11:02 CET 2023
On 21/11/2023 19:21, Stephan Gerhold wrote:
> On Tue, Nov 21, 2023 at 05:09:41PM +0000, Caleb Connolly wrote:
>> Import the msm8916 devicetree from Linux and adjust the dragonboard410c
>> devicetree to use it.
>>
>
> Can you add a note here from which Linux version you took the DT?
>
> It seems quite old, the msm8916-pm8916.dtsi doesn't exist anymore
> upstream since v6.5. Would be nice to bring it up to date (I don't have
> any more cleanup planned at the moment, so the current state upstream
> will probably stay mostly as-is).
That file still exists on 6.7-rc4, as far as I can tell?
>
> From a quick look I think U-Boot shouldn't be concerned much about the
> changes, you might just need to do some trivial renames:
>
> &msmgpio -> &tlmm
> &blsp1_uart2 -> &blsp_uart2
>
> Thanks a lot for working on this!
>
> Stephan
>
>> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
>> ---
>> arch/arm/dts/dragonboard410c-uboot.dtsi | 44 -
>> arch/arm/dts/dragonboard410c.dts | 198 +-
>> arch/arm/dts/msm8916-pins.dtsi | 582 ++++++
>> arch/arm/dts/msm8916-pm8916.dtsi | 76 +
>> arch/arm/dts/msm8916.dtsi | 2194 +++++++++++++++++++++++
>> arch/arm/dts/pm8916.dtsi | 183 ++
>> include/dt-bindings/arm/coresight-cti-dt.h | 37 +
>> include/dt-bindings/clock/qcom,rpmcc.h | 174 ++
>> include/dt-bindings/interconnect/qcom,msm8916.h | 100 ++
>> include/dt-bindings/reset/qcom,gcc-msm8916.h | 100 ++
>> 10 files changed, 3484 insertions(+), 204 deletions(-)
>>
>> diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi
>> deleted file mode 100644
>> index cec64bf80f99..000000000000
>> --- a/arch/arm/dts/dragonboard410c-uboot.dtsi
>> +++ /dev/null
>> @@ -1,44 +0,0 @@
>> -// SPDX-License-Identifier: GPL-2.0+
>> -/*
>> - * U-Boot addition to handle Dragonboard 410c pins
>> - *
>> - * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
>> - */
>> -
>> -/ {
>> -
>> - smem {
>> - bootph-all;
>> - };
>> -
>> - soc {
>> - bootph-all;
>> -
>> - pinctrl at 1000000 {
>> - bootph-all;
>> -
>> - uart {
>> - bootph-all;
>> - };
>> - };
>> -
>> - qcom,gcc at 1800000 {
>> - bootph-all;
>> - };
>> -
>> - serial at 78b0000 {
>> - bootph-all;
>> - };
>> - };
>> -};
>> -
>> -
>> -&pm8916_gpios {
>> - usb_hub_reset_pm {
>> - gpios = <&pm8916_gpios 2 0>;
>> - };
>> -
>> - usb_sw_sel_pm {
>> - gpios = <&pm8916_gpios 3 0>;
>> - };
>> -};
>> diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
>> index a42b68fee8c0..8933c64e56e5 100644
>> --- a/arch/arm/dts/dragonboard410c.dts
>> +++ b/arch/arm/dts/dragonboard410c.dts
>> @@ -7,193 +7,40 @@
>>
>> /dts-v1/;
>>
>> -#include "skeleton64.dtsi"
>> #include <dt-bindings/gpio/gpio.h>
>>
>> +#include "msm8916-pm8916.dtsi"
>> +
>> / {
>> model = "Qualcomm Technologies, Inc. Dragonboard 410c";
>> compatible = "qcom,apq8016-sbc", "qcom,apq8016";
>> qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
>> qcom,board-id = <0x10018 0x0>;
>> - #address-cells = <0x2>;
>> - #size-cells = <0x2>;
>>
>> aliases {
>> usb0 = "/soc/ehci at 78d9000";
>> + serial0 = &blsp1_uart2;
>> };
>>
>> - memory {
>> + memory at 80000000 {
>> device_type = "memory";
>> reg = <0 0x80000000 0 0x3da00000>;
>> };
>>
>> - reserved-memory {
>> - #address-cells = <2>;
>> - #size-cells = <2>;
>> - ranges;
>> -
>> - smem_mem: smem_region at 86300000 {
>> - reg = <0x0 0x86300000 0x0 0x100000>;
>> - no-map;
>> - };
>> - };
>> -
>> chosen {
>> stdout-path = "/soc/serial at 78b0000";
>> };
>>
>> - smem {
>> - compatible = "qcom,smem";
>> - memory-region = <&smem_mem>;
>> - qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> - };
>> -
>> - soc {
>> - #address-cells = <0x1>;
>> - #size-cells = <0x1>;
>> - ranges = <0x0 0x0 0x0 0xffffffff>;
>> - compatible = "simple-bus";
>> -
>> - rpm_msg_ram: memory at 60000 {
>> - compatible = "qcom,rpm-msg-ram";
>> - reg = <0x60000 0x8000>;
>> - };
>> -
>> - soc_gpios: pinctrl at 1000000 {
>> - compatible = "qcom,msm8916-pinctrl";
>> - reg = <0x1000000 0x400000>;
>> - gpio-controller;
>> - gpio-count = <122>;
>> - gpio-bank-name="soc";
>> - #gpio-cells = <2>;
>> -
>> - blsp1_uart: uart {
>> - function = "blsp1_uart";
>> - pins = "GPIO_4", "GPIO_5";
>> - drive-strength = <8>;
>> - bias-disable;
>> - };
>> - };
>> - clkc: qcom,gcc at 1800000 {
>> - compatible = "qcom,gcc-msm8916";
>> - reg = <0x1800000 0x80000>;
>> - #address-cells = <0x1>;
>> - #size-cells = <0x0>;
>> - #clock-cells = <0x1>;
>> - };
>> -
>> - serial at 78b0000 {
>> - compatible = "qcom,msm-uartdm-v1.4";
>> - reg = <0x78b0000 0x200>;
>> - clocks = <&clkc 4>;
>> - clock-names = "core";
>> - pinctrl-names = "uart";
>> - pinctrl-0 = <&blsp1_uart>;
>> - };
>> -
>> - ehci at 78d9000 {
>> - compatible = "qcom,ci-hdrc";
>> - reg = <0x78d9000 0x400>;
>> - phys = <&ehci_phy>;
>> - };
>> -
>> - ehci_phy: ehci_phy at 78d9000 {
>> - compatible = "qcom,usb-hs-phy-msm8916";
>> - reg = <0x78d9000 0x400>;
>> - #phy-cells = <0>;
>> - };
>> -
>> - sdhci at 07824000 {
>> - compatible = "qcom,sdhci-msm-v4";
>> - reg = <0x7824900 0x11c 0x7824000 0x800>;
>> - bus-width = <0x8>;
>> - index = <0x0>;
>> - non-removable;
>> - clock = <&clkc 0>;
>> - clock-frequency = <100000000>;
>> - };
>> -
>> - sdhci at 07864000 {
>> - compatible = "qcom,sdhci-msm-v4";
>> - reg = <0x7864900 0x11c 0x7864000 0x800>;
>> - index = <0x1>;
>> - bus-width = <0x4>;
>> - clock = <&clkc 1>;
>> - clock-frequency = <200000000>;
>> - cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>;
>> - };
>> -
>> - wcnss {
>> - bt {
>> - compatible="qcom,wcnss-bt";
>> - };
>> -
>> - wifi {
>> - compatible="qcom,wcnss-wlan";
>> - };
>> - };
>> -
>> - spmi_bus: spmi at 200f000 {
>> - compatible = "qcom,spmi-pmic-arb";
>> - reg = <0x0200f000 0x001000>,
>> - <0x02400000 0x400000>,
>> - <0x02c00000 0x400000>,
>> - <0x03800000 0x200000>,
>> - <0x0200a000 0x002100>;
>> - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> - #address-cells = <0x1>;
>> - #size-cells = <0x1>;
>> - pmic0: pm8916 at 0 {
>> - compatible = "qcom,spmi-pmic";
>> - reg = <0x0 0x1>;
>> - #address-cells = <0x1>;
>> - #size-cells = <0x1>;
>> -
>> - pon at 800 {
>> - compatible = "qcom,pm8916-pon";
>> - reg = <0x800 0x100>;
>> - mode-bootloader = <0x2>;
>> - mode-recovery = <0x1>;
>> -
>> - pwrkey {
>> - compatible = "qcom,pm8941-pwrkey";
>> - debounce = <15625>;
>> - bias-pull-up;
>> - };
>> -
>> - pm8916_resin: resin {
>> - compatible = "qcom,pm8941-resin";
>> - debounce = <15625>;
>> - bias-pull-up;
>> - };
>> - };
>> -
>> - pm8916_gpios: pm8916_gpios at c000 {
>> - compatible = "qcom,pm8916-gpio";
>> - reg = <0xc000 0x400>;
>> - gpio-controller;
>> - gpio-ranges = <&pm8916_gpios 0 0 4>;
>> - #gpio-cells = <2>;
>> - };
>> - };
>> -
>> - pmic1: pm8916 at 1 {
>> - compatible = "qcom,spmi-pmic";
>> - reg = <0x1 0x1>;
>> - };
>> - };
>> - };
>> -
>> leds {
>> compatible = "gpio-leds";
>> user1 {
>> label = "green:user1";
>> - gpios = <&soc_gpios 21 0>;
>> + gpios = <&msmgpio 21 0>;
>> };
>>
>> user2 {
>> label = "green:user2";
>> - gpios = <&soc_gpios 120 0>;
>> + gpios = <&msmgpio 120 0>;
>> };
>>
>> user3 {
>> @@ -208,4 +55,35 @@
>> };
>> };
>>
>> -#include "dragonboard410c-uboot.dtsi"
>> +&blsp1_uart2 {
>> + status = "okay";
>> +};
>> +
>> +&pm8916_gpios {
>> + usb_hub_reset_pm {
>> + gpios = <&pm8916_gpios 2 0>;
>> + };
>> +
>> + usb_sw_sel_pm {
>> + gpios = <&pm8916_gpios 3 0>;
>> + };
>> +};
>> +
>> +&pm8916_resin {
>> + status = "okay";
>> +};
>> +
>> +&sdhc_1 {
>> + status = "okay";
>> + clock-frequency = <100000000>;
>> +};
>> +
>> +&sdhc_2 {
>> + status = "okay";
>> + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>> + clock-frequency = <200000000>;
>> +};
>> +
>> +&usb {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/dts/msm8916-pins.dtsi b/arch/arm/dts/msm8916-pins.dtsi
>> new file mode 100644
>> index 000000000000..33dfcf318a81
>> --- /dev/null
>> +++ b/arch/arm/dts/msm8916-pins.dtsi
>> @@ -0,0 +1,582 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +&msmgpio {
>> +
>> + blsp1_uart1_default: blsp1-uart1-default-state {
>> + /* TX, RX, CTS_N, RTS_N */
>> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
>> + function = "blsp_uart1";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> +
>> + blsp1_uart1_sleep: blsp1-uart1-sleep-state {
>> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + blsp1_uart2_default: blsp1-uart2-default-state {
>> + pins = "gpio4", "gpio5";
>> + function = "blsp_uart2";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> +
>> + blsp1_uart2_sleep: blsp1-uart2-sleep-state {
>> + pins = "gpio4", "gpio5";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + spi1_default: spi1-default-state {
>> + spi-pins {
>> + pins = "gpio0", "gpio1", "gpio3";
>> + function = "blsp_spi1";
>> +
>> + drive-strength = <12>;
>> + bias-disable;
>> + };
>> + cs-pins {
>> + pins = "gpio2";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + output-high;
>> + };
>> + };
>> +
>> + spi1_sleep: spi1-sleep-state {
>> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + spi2_default: spi2-default-state {
>> + spi-pins {
>> + pins = "gpio4", "gpio5", "gpio7";
>> + function = "blsp_spi2";
>> +
>> + drive-strength = <12>;
>> + bias-disable;
>> + };
>> + cs-pins {
>> + pins = "gpio6";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + output-high;
>> + };
>> + };
>> +
>> + spi2_sleep: spi2-sleep-state {
>> + pins = "gpio4", "gpio5", "gpio6", "gpio7";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + spi3_default: spi3-default-state {
>> + spi-pins {
>> + pins = "gpio8", "gpio9", "gpio11";
>> + function = "blsp_spi3";
>> +
>> + drive-strength = <12>;
>> + bias-disable;
>> + };
>> + cs-pins {
>> + pins = "gpio10";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + output-high;
>> + };
>> + };
>> +
>> + spi3_sleep: spi3-sleep-state {
>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + spi4_default: spi4-default-state {
>> + spi-pins {
>> + pins = "gpio12", "gpio13", "gpio15";
>> + function = "blsp_spi4";
>> +
>> + drive-strength = <12>;
>> + bias-disable;
>> + };
>> + cs-pins {
>> + pins = "gpio14";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + output-high;
>> + };
>> + };
>> +
>> + spi4_sleep: spi4-sleep-state {
>> + pins = "gpio12", "gpio13", "gpio14", "gpio15";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + spi5_default: spi5-default-state {
>> + spi-pins {
>> + pins = "gpio16", "gpio17", "gpio19";
>> + function = "blsp_spi5";
>> +
>> + drive-strength = <12>;
>> + bias-disable;
>> + };
>> + cs-pins {
>> + pins = "gpio18";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + output-high;
>> + };
>> + };
>> +
>> + spi5_sleep: spi5-sleep-state {
>> + pins = "gpio16", "gpio17", "gpio18", "gpio19";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + spi6_default: spi6-default-state {
>> + spi-pins {
>> + pins = "gpio20", "gpio21", "gpio23";
>> + function = "blsp_spi6";
>> +
>> + drive-strength = <12>;
>> + bias-disable;
>> + };
>> + cs-pins {
>> + pins = "gpio22";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + output-high;
>> + };
>> + };
>> +
>> + spi6_sleep: spi6-sleep-state {
>> + pins = "gpio20", "gpio21", "gpio22", "gpio23";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> +
>> + i2c1_default: i2c1-default-state {
>> + pins = "gpio2", "gpio3";
>> + function = "blsp_i2c1";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c1_sleep: i2c1-sleep-state {
>> + pins = "gpio2", "gpio3";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c2_default: i2c2-default-state {
>> + pins = "gpio6", "gpio7";
>> + function = "blsp_i2c2";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c2_sleep: i2c2-sleep-state {
>> + pins = "gpio6", "gpio7";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c3_default: i2c3-default-state {
>> + pins = "gpio10", "gpio11";
>> + function = "blsp_i2c3";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c3_sleep: i2c3-sleep-state {
>> + pins = "gpio10", "gpio11";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c4_default: i2c4-default-state {
>> + pins = "gpio14", "gpio15";
>> + function = "blsp_i2c4";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c4_sleep: i2c4-sleep-state {
>> + pins = "gpio14", "gpio15";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c5_default: i2c5-default-state {
>> + pins = "gpio18", "gpio19";
>> + function = "blsp_i2c5";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c5_sleep: i2c5-sleep-state {
>> + pins = "gpio18", "gpio19";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c6_default: i2c6-default-state {
>> + pins = "gpio22", "gpio23";
>> + function = "blsp_i2c6";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + i2c6_sleep: i2c6-sleep-state {
>> + pins = "gpio22", "gpio23";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + pmx-sdc1-clk-state {
>> + sdc1_clk_on: clk-on-pins {
>> + pins = "sdc1_clk";
>> +
>> + bias-disable;
>> + drive-strength = <16>;
>> + };
>> + sdc1_clk_off: clk-off-pins {
>> + pins = "sdc1_clk";
>> +
>> + bias-disable;
>> + drive-strength = <2>;
>> + };
>> + };
>> +
>> + pmx-sdc1-cmd-state {
>> + sdc1_cmd_on: cmd-on-pins {
>> + pins = "sdc1_cmd";
>> +
>> + bias-pull-up;
>> + drive-strength = <10>;
>> + };
>> + sdc1_cmd_off: cmd-off-pins {
>> + pins = "sdc1_cmd";
>> +
>> + bias-pull-up;
>> + drive-strength = <2>;
>> + };
>> + };
>> +
>> + pmx-sdc1-data-state {
>> + sdc1_data_on: data-on-pins {
>> + pins = "sdc1_data";
>> +
>> + bias-pull-up;
>> + drive-strength = <10>;
>> + };
>> + sdc1_data_off: data-off-pins {
>> + pins = "sdc1_data";
>> +
>> + bias-pull-up;
>> + drive-strength = <2>;
>> + };
>> + };
>> +
>> + pmx-sdc2-clk-state {
>> + sdc2_clk_on: clk-on-pins {
>> + pins = "sdc2_clk";
>> +
>> + bias-disable;
>> + drive-strength = <16>;
>> + };
>> + sdc2_clk_off: clk-off-pins {
>> + pins = "sdc2_clk";
>> +
>> + bias-disable;
>> + drive-strength = <2>;
>> + };
>> + };
>> +
>> + pmx-sdc2-cmd-state {
>> + sdc2_cmd_on: cmd-on-pins {
>> + pins = "sdc2_cmd";
>> +
>> + bias-pull-up;
>> + drive-strength = <10>;
>> + };
>> + sdc2_cmd_off: cmd-off-pins {
>> + pins = "sdc2_cmd";
>> +
>> + bias-pull-up;
>> + drive-strength = <2>;
>> + };
>> + };
>> +
>> + pmx-sdc2-data-state {
>> + sdc2_data_on: data-on-pins {
>> + pins = "sdc2_data";
>> +
>> + bias-pull-up;
>> + drive-strength = <10>;
>> + };
>> + sdc2_data_off: data-off-pins {
>> + pins = "sdc2_data";
>> +
>> + bias-pull-up;
>> + drive-strength = <2>;
>> + };
>> + };
>> +
>> + pmx-sdc2-cd-pin-state {
>> + sdc2_cd_on: cd-on-pins {
>> + pins = "gpio38";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> + sdc2_cd_off: cd-off-pins {
>> + pins = "gpio38";
>> + function = "gpio";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + cdc-pdm-lines-state {
>> + cdc_pdm_lines_act: pdm-lines-on-pins {
>> + pins = "gpio63", "gpio64", "gpio65", "gpio66",
>> + "gpio67", "gpio68";
>> + function = "cdc_pdm0";
>> +
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + cdc_pdm_lines_sus: pdm-lines-off-pins {
>> + pins = "gpio63", "gpio64", "gpio65", "gpio66",
>> + "gpio67", "gpio68";
>> + function = "cdc_pdm0";
>> +
>> + drive-strength = <2>;
>> + bias-pull-down;
>> + };
>> + };
>> +
>> + ext-pri-tlmm-lines-state {
>> + ext_pri_tlmm_lines_act: ext-pa-on-pins {
>> + pins = "gpio113", "gpio114", "gpio115", "gpio116";
>> + function = "pri_mi2s";
>> +
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + ext_pri_tlmm_lines_sus: ext-pa-off-pins {
>> + pins = "gpio113", "gpio114", "gpio115", "gpio116";
>> + function = "pri_mi2s";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + ext-pri-ws-line-state {
>> + ext_pri_ws_act: ext-pa-on-pins {
>> + pins = "gpio110";
>> + function = "pri_mi2s_ws";
>> +
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + ext_pri_ws_sus: ext-pa-off-pins {
>> + pins = "gpio110";
>> + function = "pri_mi2s_ws";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + ext-mclk-tlmm-lines-state {
>> + ext_mclk_tlmm_lines_act: mclk-lines-on-pins {
>> + pins = "gpio116";
>> + function = "pri_mi2s";
>> +
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins {
>> + pins = "gpio116";
>> + function = "pri_mi2s";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + /* secondary Mi2S */
>> + ext-sec-tlmm-lines-state {
>> + ext_sec_tlmm_lines_act: tlmm-lines-on-pins {
>> + pins = "gpio112", "gpio117", "gpio118", "gpio119";
>> + function = "sec_mi2s";
>> +
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins {
>> + pins = "gpio112", "gpio117", "gpio118", "gpio119";
>> + function = "sec_mi2s";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + cdc_dmic_lines_act: cdc-dmic-lines-on-state {
>> + clk-pins {
>> + pins = "gpio0";
>> + function = "dmic0_clk";
>> +
>> + drive-strength = <8>;
>> + };
>> + data-pins {
>> + pins = "gpio1";
>> + function = "dmic0_data";
>> +
>> + drive-strength = <8>;
>> + };
>> + };
>> + cdc_dmic_lines_sus: cdc-dmic-lines-off-state {
>> + clk-pins {
>> + pins = "gpio0";
>> + function = "dmic0_clk";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + data-pins {
>> + pins = "gpio1";
>> + function = "dmic0_data";
>> +
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + wcnss_pin_a: wcnss-active-state {
>> + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
>> + function = "wcss_wlan";
>> +
>> + drive-strength = <6>;
>> + bias-pull-up;
>> + };
>> +
>> + cci0_default: cci0-default-state {
>> + pins = "gpio29", "gpio30";
>> + function = "cci_i2c";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> +
>> + camera_front_default: camera-front-default-state {
>> + pwdn-pins {
>> + pins = "gpio33";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> + rst-pins {
>> + pins = "gpio28";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> + mclk1-pins {
>> + pins = "gpio27";
>> + function = "cam_mclk1";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + camera_rear_default: camera-rear-default-state {
>> + pwdn-pins {
>> + pins = "gpio34";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> + rst-pins {
>> + pins = "gpio35";
>> + function = "gpio";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> + mclk0-pins {
>> + pins = "gpio26";
>> + function = "cam_mclk0";
>> +
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm/dts/msm8916-pm8916.dtsi b/arch/arm/dts/msm8916-pm8916.dtsi
>> new file mode 100644
>> index 000000000000..6eb5e0a39510
>> --- /dev/null
>> +++ b/arch/arm/dts/msm8916-pm8916.dtsi
>> @@ -0,0 +1,76 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +
>> +#include "msm8916.dtsi"
>> +#include "pm8916.dtsi"
>> +
>> +&camss {
>> + vdda-supply = <&pm8916_l2>;
>> +};
>> +
>> +&dsi0 {
>> + vdda-supply = <&pm8916_l2>;
>> + vddio-supply = <&pm8916_l6>;
>> +};
>> +
>> +&dsi_phy0 {
>> + vddio-supply = <&pm8916_l6>;
>> +};
>> +
>> +&mpss {
>> + pll-supply = <&pm8916_l7>;
>> +};
>> +
>> +&sdhc_1 {
>> + vmmc-supply = <&pm8916_l8>;
>> + vqmmc-supply = <&pm8916_l5>;
>> +};
>> +
>> +&sdhc_2 {
>> + vmmc-supply = <&pm8916_l11>;
>> + vqmmc-supply = <&pm8916_l12>;
>> +};
>> +
>> +&usb_hs_phy {
>> + v1p8-supply = <&pm8916_l7>;
>> + v3p3-supply = <&pm8916_l13>;
>> +};
>> +
>> +&wcnss {
>> + vddpx-supply = <&pm8916_l7>;
>> +};
>> +
>> +&wcnss_iris {
>> + vddxo-supply = <&pm8916_l7>;
>> + vddrfa-supply = <&pm8916_s3>;
>> + vddpa-supply = <&pm8916_l9>;
>> + vdddig-supply = <&pm8916_l5>;
>> +};
>> +
>> +&rpm_requests {
>> + smd_rpm_regulators: regulators {
>> + compatible = "qcom,rpm-pm8916-regulators";
>> +
>> + /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
>> + pm8916_s3: s3 {};
>> + pm8916_s4: s4 {};
>> +
>> + pm8916_l1: l1 {};
>> + pm8916_l2: l2 {};
>> + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
>> + pm8916_l4: l4 {};
>> + pm8916_l5: l5 {};
>> + pm8916_l6: l6 {};
>> + pm8916_l7: l7 {};
>> + pm8916_l8: l8 {};
>> + pm8916_l9: l9 {};
>> + pm8916_l10: l10 {};
>> + pm8916_l11: l11 {};
>> + pm8916_l12: l12 {};
>> + pm8916_l13: l13 {};
>> + pm8916_l14: l14 {};
>> + pm8916_l15: l15 {};
>> + pm8916_l16: l16 {};
>> + pm8916_l17: l17 {};
>> + pm8916_l18: l18 {};
>> + };
>> +};
>> diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi
>> new file mode 100644
>> index 000000000000..834e0b66b7f2
>> --- /dev/null
>> +++ b/arch/arm/dts/msm8916.dtsi
>> @@ -0,0 +1,2194 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/arm/coresight-cti-dt.h>
>> +#include <dt-bindings/clock/qcom,gcc-msm8916.h>
>> +#include <dt-bindings/clock/qcom,rpmcc.h>
>> +#include <dt-bindings/interconnect/qcom,msm8916.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/reset/qcom,gcc-msm8916.h>
>> +#include <dt-bindings/thermal/thermal.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + aliases {
>> + mmc0 = &sdhc_1; /* SDC1 eMMC slot */
>> + mmc1 = &sdhc_2; /* SDC2 SD card slot */
>> + };
>> +
>> + chosen { };
>> +
>> + memory at 80000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the reg */
>> + reg = <0 0x80000000 0 0>;
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + tz-apps at 86000000 {
>> + reg = <0x0 0x86000000 0x0 0x300000>;
>> + no-map;
>> + };
>> +
>> + smem at 86300000 {
>> + compatible = "qcom,smem";
>> + reg = <0x0 0x86300000 0x0 0x100000>;
>> + no-map;
>> +
>> + hwlocks = <&tcsr_mutex 3>;
>> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> + };
>> +
>> + hypervisor at 86400000 {
>> + reg = <0x0 0x86400000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + tz at 86500000 {
>> + reg = <0x0 0x86500000 0x0 0x180000>;
>> + no-map;
>> + };
>> +
>> + reserved at 86680000 {
>> + reg = <0x0 0x86680000 0x0 0x80000>;
>> + no-map;
>> + };
>> +
>> + rmtfs at 86700000 {
>> + compatible = "qcom,rmtfs-mem";
>> + reg = <0x0 0x86700000 0x0 0xe0000>;
>> + no-map;
>> +
>> + qcom,client-id = <1>;
>> + };
>> +
>> + rfsa at 867e0000 {
>> + reg = <0x0 0x867e0000 0x0 0x20000>;
>> + no-map;
>> + };
>> +
>> + mpss_mem: mpss at 86800000 {
>> + reg = <0x0 0x86800000 0x0 0x2b00000>;
>> + no-map;
>> + };
>> +
>> + wcnss_mem: wcnss at 89300000 {
>> + reg = <0x0 0x89300000 0x0 0x600000>;
>> + no-map;
>> + };
>> +
>> + venus_mem: venus at 89900000 {
>> + reg = <0x0 0x89900000 0x0 0x600000>;
>> + no-map;
>> + };
>> +
>> + mba_mem: mba at 8ea00000 {
>> + no-map;
>> + reg = <0 0x8ea00000 0 0x100000>;
>> + };
>> + };
>> +
>> + clocks {
>> + xo_board: xo-board {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <19200000>;
>> + };
>> +
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0>;
>> + next-level-cache = <&L2_0>;
>> + enable-method = "psci";
>> + clocks = <&apcs>;
>> + operating-points-v2 = <&cpu_opp_table>;
>> + #cooling-cells = <2>;
>> + power-domains = <&CPU_PD0>;
>> + power-domain-names = "psci";
>> + qcom,acc = <&cpu0_acc>;
>> + qcom,saw = <&cpu0_saw>;
>> + };
>> +
>> + CPU1: cpu at 1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x1>;
>> + next-level-cache = <&L2_0>;
>> + enable-method = "psci";
>> + clocks = <&apcs>;
>> + operating-points-v2 = <&cpu_opp_table>;
>> + #cooling-cells = <2>;
>> + power-domains = <&CPU_PD1>;
>> + power-domain-names = "psci";
>> + qcom,acc = <&cpu1_acc>;
>> + qcom,saw = <&cpu1_saw>;
>> + };
>> +
>> + CPU2: cpu at 2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x2>;
>> + next-level-cache = <&L2_0>;
>> + enable-method = "psci";
>> + clocks = <&apcs>;
>> + operating-points-v2 = <&cpu_opp_table>;
>> + #cooling-cells = <2>;
>> + power-domains = <&CPU_PD2>;
>> + power-domain-names = "psci";
>> + qcom,acc = <&cpu2_acc>;
>> + qcom,saw = <&cpu2_saw>;
>> + };
>> +
>> + CPU3: cpu at 3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x3>;
>> + next-level-cache = <&L2_0>;
>> + enable-method = "psci";
>> + clocks = <&apcs>;
>> + operating-points-v2 = <&cpu_opp_table>;
>> + #cooling-cells = <2>;
>> + power-domains = <&CPU_PD3>;
>> + power-domain-names = "psci";
>> + qcom,acc = <&cpu3_acc>;
>> + qcom,saw = <&cpu3_saw>;
>> + };
>> +
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + cache-level = <2>;
>> + cache-unified;
>> + };
>> +
>> + idle-states {
>> + entry-method = "psci";
>> +
>> + CPU_SLEEP_0: cpu-sleep-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "standalone-power-collapse";
>> + arm,psci-suspend-param = <0x40000002>;
>> + entry-latency-us = <130>;
>> + exit-latency-us = <150>;
>> + min-residency-us = <2000>;
>> + local-timer-stop;
>> + };
>> + };
>> +
>> + domain-idle-states {
>> +
>> + CLUSTER_RET: cluster-retention {
>> + compatible = "domain-idle-state";
>> + arm,psci-suspend-param = <0x41000012>;
>> + entry-latency-us = <500>;
>> + exit-latency-us = <500>;
>> + min-residency-us = <2000>;
>> + };
>> +
>> + CLUSTER_PWRDN: cluster-gdhs {
>> + compatible = "domain-idle-state";
>> + arm,psci-suspend-param = <0x41000032>;
>> + entry-latency-us = <2000>;
>> + exit-latency-us = <2000>;
>> + min-residency-us = <6000>;
>> + };
>> + };
>> + };
>> +
>> + cpu_opp_table: opp-table-cpu {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-200000000 {
>> + opp-hz = /bits/ 64 <200000000>;
>> + };
>> + opp-400000000 {
>> + opp-hz = /bits/ 64 <400000000>;
>> + };
>> + opp-800000000 {
>> + opp-hz = /bits/ 64 <800000000>;
>> + };
>> + opp-998400000 {
>> + opp-hz = /bits/ 64 <998400000>;
>> + };
>> + };
>> +
>> + firmware {
>> + scm: scm {
>> + compatible = "qcom,scm-msm8916", "qcom,scm";
>> + clocks = <&gcc GCC_CRYPTO_CLK>,
>> + <&gcc GCC_CRYPTO_AXI_CLK>,
>> + <&gcc GCC_CRYPTO_AHB_CLK>;
>> + clock-names = "core", "bus", "iface";
>> + #reset-cells = <1>;
>> +
>> + qcom,dload-mode = <&tcsr 0x6100>;
>> + };
>> + };
>> +
>> + pmu {
>> + compatible = "arm,cortex-a53-pmu";
>> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> +
>> + CPU_PD0: power-domain-cpu0 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD1: power-domain-cpu1 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD2: power-domain-cpu2 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD3: power-domain-cpu3 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_SLEEP_0>;
>> + };
>> +
>> + CLUSTER_PD: power-domain-cluster {
>> + #power-domain-cells = <0>;
>> + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
>> + };
>> + };
>> +
>> + smd {
>> + compatible = "qcom,smd";
>> +
>> + rpm {
>> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
>> + qcom,ipc = <&apcs 8 0>;
>> + qcom,smd-edge = <15>;
>> +
>> + rpm_requests: rpm-requests {
>> + compatible = "qcom,rpm-msm8916";
>> + qcom,smd-channels = "rpm_requests";
>> +
>> + rpmcc: clock-controller {
>> + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
>> + #clock-cells = <1>;
>> + clocks = <&xo_board>;
>> + clock-names = "xo";
>> + };
>> +
>> + rpmpd: power-controller {
>> + compatible = "qcom,msm8916-rpmpd";
>> + #power-domain-cells = <1>;
>> + operating-points-v2 = <&rpmpd_opp_table>;
>> +
>> + rpmpd_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + rpmpd_opp_ret: opp1 {
>> + opp-level = <1>;
>> + };
>> + rpmpd_opp_svs_krait: opp2 {
>> + opp-level = <2>;
>> + };
>> + rpmpd_opp_svs_soc: opp3 {
>> + opp-level = <3>;
>> + };
>> + rpmpd_opp_nom: opp4 {
>> + opp-level = <4>;
>> + };
>> + rpmpd_opp_turbo: opp5 {
>> + opp-level = <5>;
>> + };
>> + rpmpd_opp_super_turbo: opp6 {
>> + opp-level = <6>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> + };
>> +
>> + smp2p-hexagon {
>> + compatible = "qcom,smp2p";
>> + qcom,smem = <435>, <428>;
>> +
>> + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
>> +
>> + qcom,ipc = <&apcs 8 14>;
>> +
>> + qcom,local-pid = <0>;
>> + qcom,remote-pid = <1>;
>> +
>> + hexagon_smp2p_out: master-kernel {
>> + qcom,entry-name = "master-kernel";
>> +
>> + #qcom,smem-state-cells = <1>;
>> + };
>> +
>> + hexagon_smp2p_in: slave-kernel {
>> + qcom,entry-name = "slave-kernel";
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +
>> + smp2p-wcnss {
>> + compatible = "qcom,smp2p";
>> + qcom,smem = <451>, <431>;
>> +
>> + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
>> +
>> + qcom,ipc = <&apcs 8 18>;
>> +
>> + qcom,local-pid = <0>;
>> + qcom,remote-pid = <4>;
>> +
>> + wcnss_smp2p_out: master-kernel {
>> + qcom,entry-name = "master-kernel";
>> +
>> + #qcom,smem-state-cells = <1>;
>> + };
>> +
>> + wcnss_smp2p_in: slave-kernel {
>> + qcom,entry-name = "slave-kernel";
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +
>> + smsm {
>> + compatible = "qcom,smsm";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + qcom,ipc-1 = <&apcs 8 13>;
>> + qcom,ipc-3 = <&apcs 8 19>;
>> +
>> + apps_smsm: apps at 0 {
>> + reg = <0>;
>> +
>> + #qcom,smem-state-cells = <1>;
>> + };
>> +
>> + hexagon_smsm: hexagon at 1 {
>> + reg = <1>;
>> + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + wcnss_smsm: wcnss at 6 {
>> + reg = <6>;
>> + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +
>> + soc: soc at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0 0xffffffff>;
>> + compatible = "simple-bus";
>> +
>> + rng at 22000 {
>> + compatible = "qcom,prng";
>> + reg = <0x00022000 0x200>;
>> + clocks = <&gcc GCC_PRNG_AHB_CLK>;
>> + clock-names = "core";
>> + };
>> +
>> + restart at 4ab000 {
>> + compatible = "qcom,pshold";
>> + reg = <0x004ab000 0x4>;
>> + };
>> +
>> + qfprom: qfprom at 5c000 {
>> + compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
>> + reg = <0x0005c000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + tsens_base1: base1 at d0 {
>> + reg = <0xd0 0x1>;
>> + bits = <0 7>;
>> + };
>> +
>> + tsens_s0_p1: s0-p1 at d0 {
>> + reg = <0xd0 0x2>;
>> + bits = <7 5>;
>> + };
>> +
>> + tsens_s0_p2: s0-p2 at d1 {
>> + reg = <0xd1 0x2>;
>> + bits = <4 5>;
>> + };
>> +
>> + tsens_s1_p1: s1-p1 at d2 {
>> + reg = <0xd2 0x1>;
>> + bits = <1 5>;
>> + };
>> + tsens_s1_p2: s1-p2 at d2 {
>> + reg = <0xd2 0x2>;
>> + bits = <6 5>;
>> + };
>> + tsens_s2_p1: s2-p1 at d3 {
>> + reg = <0xd3 0x1>;
>> + bits = <3 5>;
>> + };
>> +
>> + tsens_s2_p2: s2-p2 at d4 {
>> + reg = <0xd4 0x1>;
>> + bits = <0 5>;
>> + };
>> +
>> + // no tsens with hw_id 3
>> +
>> + tsens_s4_p1: s4-p1 at d4 {
>> + reg = <0xd4 0x2>;
>> + bits = <5 5>;
>> + };
>> +
>> + tsens_s4_p2: s4-p2 at d5 {
>> + reg = <0xd5 0x1>;
>> + bits = <2 5>;
>> + };
>> +
>> + tsens_s5_p1: s5-p1 at d5 {
>> + reg = <0xd5 0x2>;
>> + bits = <7 5>;
>> + };
>> +
>> + tsens_s5_p2: s5-p2 at d6 {
>> + reg = <0xd6 0x2>;
>> + bits = <4 5>;
>> + };
>> +
>> + tsens_base2: base2 at d7 {
>> + reg = <0xd7 0x1>;
>> + bits = <1 7>;
>> + };
>> +
>> + tsens_mode: mode at ef {
>> + reg = <0xef 0x1>;
>> + bits = <5 3>;
>> + };
>> + };
>> +
>> + rpm_msg_ram: sram at 60000 {
>> + compatible = "qcom,rpm-msg-ram";
>> + reg = <0x00060000 0x8000>;
>> + };
>> +
>> + sram at 290000 {
>> + compatible = "qcom,msm8916-rpm-stats";
>> + reg = <0x00290000 0x10000>;
>> + };
>> +
>> + bimc: interconnect at 400000 {
>> + compatible = "qcom,msm8916-bimc";
>> + reg = <0x00400000 0x62000>;
>> + #interconnect-cells = <1>;
>> + clock-names = "bus", "bus_a";
>> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
>> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
>> + };
>> +
>> + tsens: thermal-sensor at 4a9000 {
>> + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
>> + reg = <0x004a9000 0x1000>, /* TM */
>> + <0x004a8000 0x1000>; /* SROT */
>> +
>> + // no hw_id 3
>> + nvmem-cells = <&tsens_mode>,
>> + <&tsens_base1>, <&tsens_base2>,
>> + <&tsens_s0_p1>, <&tsens_s0_p2>,
>> + <&tsens_s1_p1>, <&tsens_s1_p2>,
>> + <&tsens_s2_p1>, <&tsens_s2_p2>,
>> + <&tsens_s4_p1>, <&tsens_s4_p2>,
>> + <&tsens_s5_p1>, <&tsens_s5_p2>;
>> + nvmem-cell-names = "mode",
>> + "base1", "base2",
>> + "s0_p1", "s0_p2",
>> + "s1_p1", "s1_p2",
>> + "s2_p1", "s2_p2",
>> + "s4_p1", "s4_p2",
>> + "s5_p1", "s5_p2";
>> + #qcom,sensors = <5>;
>> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "uplow";
>> + #thermal-sensor-cells = <1>;
>> + };
>> +
>> + pcnoc: interconnect at 500000 {
>> + compatible = "qcom,msm8916-pcnoc";
>> + reg = <0x00500000 0x11000>;
>> + #interconnect-cells = <1>;
>> + clock-names = "bus", "bus_a";
>> + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
>> + <&rpmcc RPM_SMD_PCNOC_A_CLK>;
>> + };
>> +
>> + snoc: interconnect at 580000 {
>> + compatible = "qcom,msm8916-snoc";
>> + reg = <0x00580000 0x14000>;
>> + #interconnect-cells = <1>;
>> + clock-names = "bus", "bus_a";
>> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
>> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
>> + };
>> +
>> + stm: stm at 802000 {
>> + compatible = "arm,coresight-stm", "arm,primecell";
>> + reg = <0x00802000 0x1000>,
>> + <0x09280000 0x180000>;
>> + reg-names = "stm-base", "stm-stimulus-base";
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + out-ports {
>> + port {
>> + stm_out: endpoint {
>> + remote-endpoint = <&funnel0_in7>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + /* System CTIs */
>> + /* CTI 0 - TMC connections */
>> + cti0: cti at 810000 {
>> + compatible = "arm,coresight-cti", "arm,primecell";
>> + reg = <0x00810000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> +
>> + status = "disabled";
>> + };
>> +
>> + /* CTI 1 - TPIU connections */
>> + cti1: cti at 811000 {
>> + compatible = "arm,coresight-cti", "arm,primecell";
>> + reg = <0x00811000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> +
>> + status = "disabled";
>> + };
>> +
>> + /* CTIs 2-11 - no information - not instantiated */
>> +
>> + tpiu: tpiu at 820000 {
>> + compatible = "arm,coresight-tpiu", "arm,primecell";
>> + reg = <0x00820000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + in-ports {
>> + port {
>> + tpiu_in: endpoint {
>> + remote-endpoint = <&replicator_out1>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + funnel0: funnel at 821000 {
>> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
>> + reg = <0x00821000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + in-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + /*
>> + * Not described input ports:
>> + * 0 - connected to Resource and Power Manger CPU ETM
>> + * 1 - not-connected
>> + * 2 - connected to Modem CPU ETM
>> + * 3 - not-connected
>> + * 5 - not-connected
>> + * 6 - connected trought funnel to Wireless CPU ETM
>> + * 7 - connected to STM component
>> + */
>> +
>> + port at 4 {
>> + reg = <4>;
>> + funnel0_in4: endpoint {
>> + remote-endpoint = <&funnel1_out>;
>> + };
>> + };
>> +
>> + port at 7 {
>> + reg = <7>;
>> + funnel0_in7: endpoint {
>> + remote-endpoint = <&stm_out>;
>> + };
>> + };
>> + };
>> +
>> + out-ports {
>> + port {
>> + funnel0_out: endpoint {
>> + remote-endpoint = <&etf_in>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + replicator: replicator at 824000 {
>> + compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
>> + reg = <0x00824000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + out-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + replicator_out0: endpoint {
>> + remote-endpoint = <&etr_in>;
>> + };
>> + };
>> + port at 1 {
>> + reg = <1>;
>> + replicator_out1: endpoint {
>> + remote-endpoint = <&tpiu_in>;
>> + };
>> + };
>> + };
>> +
>> + in-ports {
>> + port {
>> + replicator_in: endpoint {
>> + remote-endpoint = <&etf_out>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + etf: etf at 825000 {
>> + compatible = "arm,coresight-tmc", "arm,primecell";
>> + reg = <0x00825000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + in-ports {
>> + port {
>> + etf_in: endpoint {
>> + remote-endpoint = <&funnel0_out>;
>> + };
>> + };
>> + };
>> +
>> + out-ports {
>> + port {
>> + etf_out: endpoint {
>> + remote-endpoint = <&replicator_in>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + etr: etr at 826000 {
>> + compatible = "arm,coresight-tmc", "arm,primecell";
>> + reg = <0x00826000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + in-ports {
>> + port {
>> + etr_in: endpoint {
>> + remote-endpoint = <&replicator_out0>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + funnel1: funnel at 841000 { /* APSS funnel only 4 inputs are used */
>> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
>> + reg = <0x00841000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> +
>> + status = "disabled";
>> +
>> + in-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + funnel1_in0: endpoint {
>> + remote-endpoint = <&etm0_out>;
>> + };
>> + };
>> + port at 1 {
>> + reg = <1>;
>> + funnel1_in1: endpoint {
>> + remote-endpoint = <&etm1_out>;
>> + };
>> + };
>> + port at 2 {
>> + reg = <2>;
>> + funnel1_in2: endpoint {
>> + remote-endpoint = <&etm2_out>;
>> + };
>> + };
>> + port at 3 {
>> + reg = <3>;
>> + funnel1_in3: endpoint {
>> + remote-endpoint = <&etm3_out>;
>> + };
>> + };
>> + };
>> +
>> + out-ports {
>> + port {
>> + funnel1_out: endpoint {
>> + remote-endpoint = <&funnel0_in4>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + debug0: debug at 850000 {
>> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
>> + reg = <0x00850000 0x1000>;
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> + cpu = <&CPU0>;
>> + status = "disabled";
>> + };
>> +
>> + debug1: debug at 852000 {
>> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
>> + reg = <0x00852000 0x1000>;
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> + cpu = <&CPU1>;
>> + status = "disabled";
>> + };
>> +
>> + debug2: debug at 854000 {
>> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
>> + reg = <0x00854000 0x1000>;
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> + cpu = <&CPU2>;
>> + status = "disabled";
>> + };
>> +
>> + debug3: debug at 856000 {
>> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
>> + reg = <0x00856000 0x1000>;
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> + cpu = <&CPU3>;
>> + status = "disabled";
>> + };
>> +
>> + /* Core CTIs; CTIs 12-15 */
>> + /* CTI - CPU-0 */
>> + cti12: cti at 858000 {
>> + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
>> + "arm,primecell";
>> + reg = <0x00858000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> +
>> + cpu = <&CPU0>;
>> + arm,cs-dev-assoc = <&etm0>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + /* CTI - CPU-1 */
>> + cti13: cti at 859000 {
>> + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
>> + "arm,primecell";
>> + reg = <0x00859000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> +
>> + cpu = <&CPU1>;
>> + arm,cs-dev-assoc = <&etm1>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + /* CTI - CPU-2 */
>> + cti14: cti at 85a000 {
>> + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
>> + "arm,primecell";
>> + reg = <0x0085a000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> +
>> + cpu = <&CPU2>;
>> + arm,cs-dev-assoc = <&etm2>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + /* CTI - CPU-3 */
>> + cti15: cti at 85b000 {
>> + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
>> + "arm,primecell";
>> + reg = <0x0085b000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>;
>> + clock-names = "apb_pclk";
>> +
>> + cpu = <&CPU3>;
>> + arm,cs-dev-assoc = <&etm3>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + etm0: etm at 85c000 {
>> + compatible = "arm,coresight-etm4x", "arm,primecell";
>> + reg = <0x0085c000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> + arm,coresight-loses-context-with-cpu;
>> +
>> + cpu = <&CPU0>;
>> +
>> + status = "disabled";
>> +
>> + out-ports {
>> + port {
>> + etm0_out: endpoint {
>> + remote-endpoint = <&funnel1_in0>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + etm1: etm at 85d000 {
>> + compatible = "arm,coresight-etm4x", "arm,primecell";
>> + reg = <0x0085d000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> + arm,coresight-loses-context-with-cpu;
>> +
>> + cpu = <&CPU1>;
>> +
>> + status = "disabled";
>> +
>> + out-ports {
>> + port {
>> + etm1_out: endpoint {
>> + remote-endpoint = <&funnel1_in1>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + etm2: etm at 85e000 {
>> + compatible = "arm,coresight-etm4x", "arm,primecell";
>> + reg = <0x0085e000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> + arm,coresight-loses-context-with-cpu;
>> +
>> + cpu = <&CPU2>;
>> +
>> + status = "disabled";
>> +
>> + out-ports {
>> + port {
>> + etm2_out: endpoint {
>> + remote-endpoint = <&funnel1_in2>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + etm3: etm at 85f000 {
>> + compatible = "arm,coresight-etm4x", "arm,primecell";
>> + reg = <0x0085f000 0x1000>;
>> +
>> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
>> + clock-names = "apb_pclk", "atclk";
>> + arm,coresight-loses-context-with-cpu;
>> +
>> + cpu = <&CPU3>;
>> +
>> + status = "disabled";
>> +
>> + out-ports {
>> + port {
>> + etm3_out: endpoint {
>> + remote-endpoint = <&funnel1_in3>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + msmgpio: pinctrl at 1000000 {
>> + compatible = "qcom,msm8916-pinctrl";
>> + reg = <0x01000000 0x300000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + gpio-ranges = <&msmgpio 0 0 122>;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gcc: clock-controller at 1800000 {
>> + compatible = "qcom,gcc-msm8916";
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + #power-domain-cells = <1>;
>> + reg = <0x01800000 0x80000>;
>> + clocks = <&xo_board>,
>> + <&sleep_clk>,
>> + <&dsi_phy0 1>,
>> + <&dsi_phy0 0>,
>> + <0>,
>> + <0>,
>> + <0>;
>> + clock-names = "xo",
>> + "sleep_clk",
>> + "dsi0pll",
>> + "dsi0pllbyte",
>> + "ext_mclk",
>> + "ext_pri_i2s",
>> + "ext_sec_i2s";
>> + };
>> +
>> + tcsr_mutex: hwlock at 1905000 {
>> + compatible = "qcom,tcsr-mutex";
>> + reg = <0x01905000 0x20000>;
>> + #hwlock-cells = <1>;
>> + };
>> +
>> + tcsr: syscon at 1937000 {
>> + compatible = "qcom,tcsr-msm8916", "syscon";
>> + reg = <0x01937000 0x30000>;
>> + };
>> +
>> + mdss: display-subsystem at 1a00000 {
>> + status = "disabled";
>> + compatible = "qcom,mdss";
>> + reg = <0x01a00000 0x1000>,
>> + <0x01ac8000 0x3000>;
>> + reg-names = "mdss_phys", "vbif_phys";
>> +
>> + power-domains = <&gcc MDSS_GDSC>;
>> +
>> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
>> + <&gcc GCC_MDSS_AXI_CLK>,
>> + <&gcc GCC_MDSS_VSYNC_CLK>;
>> + clock-names = "iface",
>> + "bus",
>> + "vsync";
>> +
>> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + mdp: display-controller at 1a01000 {
>> + compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
>> + reg = <0x01a01000 0x89000>;
>> + reg-names = "mdp_phys";
>> +
>> + interrupt-parent = <&mdss>;
>> + interrupts = <0>;
>> +
>> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
>> + <&gcc GCC_MDSS_AXI_CLK>,
>> + <&gcc GCC_MDSS_MDP_CLK>,
>> + <&gcc GCC_MDSS_VSYNC_CLK>;
>> + clock-names = "iface",
>> + "bus",
>> + "core",
>> + "vsync";
>> +
>> + iommus = <&apps_iommu 4>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + mdp5_intf1_out: endpoint {
>> + remote-endpoint = <&dsi0_in>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + dsi0: dsi at 1a98000 {
>> + compatible = "qcom,msm8916-dsi-ctrl",
>> + "qcom,mdss-dsi-ctrl";
>> + reg = <0x01a98000 0x25c>;
>> + reg-names = "dsi_ctrl";
>> +
>> + interrupt-parent = <&mdss>;
>> + interrupts = <4>;
>> +
>> + assigned-clocks = <&gcc BYTE0_CLK_SRC>,
>> + <&gcc PCLK0_CLK_SRC>;
>> + assigned-clock-parents = <&dsi_phy0 0>,
>> + <&dsi_phy0 1>;
>> +
>> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
>> + <&gcc GCC_MDSS_AHB_CLK>,
>> + <&gcc GCC_MDSS_AXI_CLK>,
>> + <&gcc GCC_MDSS_BYTE0_CLK>,
>> + <&gcc GCC_MDSS_PCLK0_CLK>,
>> + <&gcc GCC_MDSS_ESC0_CLK>;
>> + clock-names = "mdp_core",
>> + "iface",
>> + "bus",
>> + "byte",
>> + "pixel",
>> + "core";
>> + phys = <&dsi_phy0>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + dsi0_in: endpoint {
>> + remote-endpoint = <&mdp5_intf1_out>;
>> + };
>> + };
>> +
>> + port at 1 {
>> + reg = <1>;
>> + dsi0_out: endpoint {
>> + };
>> + };
>> + };
>> + };
>> +
>> + dsi_phy0: phy at 1a98300 {
>> + compatible = "qcom,dsi-phy-28nm-lp";
>> + reg = <0x01a98300 0xd4>,
>> + <0x01a98500 0x280>,
>> + <0x01a98780 0x30>;
>> + reg-names = "dsi_pll",
>> + "dsi_phy",
>> + "dsi_phy_regulator";
>> +
>> + #clock-cells = <1>;
>> + #phy-cells = <0>;
>> +
>> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "ref";
>> + };
>> + };
>> +
>> + camss: camss at 1b00000 {
>> + compatible = "qcom,msm8916-camss";
>> + reg = <0x01b0ac00 0x200>,
>> + <0x01b00030 0x4>,
>> + <0x01b0b000 0x200>,
>> + <0x01b00038 0x4>,
>> + <0x01b08000 0x100>,
>> + <0x01b08400 0x100>,
>> + <0x01b0a000 0x500>,
>> + <0x01b00020 0x10>,
>> + <0x01b10000 0x1000>;
>> + reg-names = "csiphy0",
>> + "csiphy0_clk_mux",
>> + "csiphy1",
>> + "csiphy1_clk_mux",
>> + "csid0",
>> + "csid1",
>> + "ispif",
>> + "csi_clk_mux",
>> + "vfe0";
>> + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "csiphy0",
>> + "csiphy1",
>> + "csid0",
>> + "csid1",
>> + "ispif",
>> + "vfe0";
>> + power-domains = <&gcc VFE_GDSC>;
>> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
>> + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
>> + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
>> + <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CSI0_CLK>,
>> + <&gcc GCC_CAMSS_CSI0PHY_CLK>,
>> + <&gcc GCC_CAMSS_CSI0PIX_CLK>,
>> + <&gcc GCC_CAMSS_CSI0RDI_CLK>,
>> + <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CSI1_CLK>,
>> + <&gcc GCC_CAMSS_CSI1PHY_CLK>,
>> + <&gcc GCC_CAMSS_CSI1PIX_CLK>,
>> + <&gcc GCC_CAMSS_CSI1RDI_CLK>,
>> + <&gcc GCC_CAMSS_AHB_CLK>,
>> + <&gcc GCC_CAMSS_VFE0_CLK>,
>> + <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
>> + <&gcc GCC_CAMSS_VFE_AHB_CLK>,
>> + <&gcc GCC_CAMSS_VFE_AXI_CLK>;
>> + clock-names = "top_ahb",
>> + "ispif_ahb",
>> + "csiphy0_timer",
>> + "csiphy1_timer",
>> + "csi0_ahb",
>> + "csi0",
>> + "csi0_phy",
>> + "csi0_pix",
>> + "csi0_rdi",
>> + "csi1_ahb",
>> + "csi1",
>> + "csi1_phy",
>> + "csi1_pix",
>> + "csi1_rdi",
>> + "ahb",
>> + "vfe0",
>> + "csi_vfe0",
>> + "vfe_ahb",
>> + "vfe_axi";
>> + iommus = <&apps_iommu 3>;
>> + status = "disabled";
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> + };
>> +
>> + cci: cci at 1b0c000 {
>> + compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x01b0c000 0x1000>;
>> + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CCI_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CCI_CLK>,
>> + <&gcc GCC_CAMSS_AHB_CLK>;
>> + clock-names = "camss_top_ahb", "cci_ahb",
>> + "cci", "camss_ahb";
>> + assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
>> + <&gcc GCC_CAMSS_CCI_CLK>;
>> + assigned-clock-rates = <80000000>, <19200000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&cci0_default>;
>> + status = "disabled";
>> +
>> + cci_i2c0: i2c-bus at 0 {
>> + reg = <0>;
>> + clock-frequency = <400000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> + };
>> +
>> + gpu at 1c00000 {
>> + compatible = "qcom,adreno-306.0", "qcom,adreno";
>> + reg = <0x01c00000 0x20000>;
>> + reg-names = "kgsl_3d0_reg_memory";
>> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "kgsl_3d0_irq";
>> + clock-names =
>> + "core",
>> + "iface",
>> + "mem",
>> + "mem_iface",
>> + "alt_mem_iface",
>> + "gfx3d";
>> + clocks =
>> + <&gcc GCC_OXILI_GFX3D_CLK>,
>> + <&gcc GCC_OXILI_AHB_CLK>,
>> + <&gcc GCC_OXILI_GMEM_CLK>,
>> + <&gcc GCC_BIMC_GFX_CLK>,
>> + <&gcc GCC_BIMC_GPU_CLK>,
>> + <&gcc GFX3D_CLK_SRC>;
>> + power-domains = <&gcc OXILI_GDSC>;
>> + operating-points-v2 = <&gpu_opp_table>;
>> + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
>> +
>> + gpu_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-400000000 {
>> + opp-hz = /bits/ 64 <400000000>;
>> + };
>> + opp-19200000 {
>> + opp-hz = /bits/ 64 <19200000>;
>> + };
>> + };
>> + };
>> +
>> + venus: video-codec at 1d00000 {
>> + compatible = "qcom,msm8916-venus";
>> + reg = <0x01d00000 0xff000>;
>> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
>> + power-domains = <&gcc VENUS_GDSC>;
>> + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
>> + <&gcc GCC_VENUS0_AHB_CLK>,
>> + <&gcc GCC_VENUS0_AXI_CLK>;
>> + clock-names = "core", "iface", "bus";
>> + iommus = <&apps_iommu 5>;
>> + memory-region = <&venus_mem>;
>> + status = "okay";
>> +
>> + video-decoder {
>> + compatible = "venus-decoder";
>> + };
>> +
>> + video-encoder {
>> + compatible = "venus-encoder";
>> + };
>> + };
>> +
>> + apps_iommu: iommu at 1ef0000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + #iommu-cells = <1>;
>> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
>> + ranges = <0 0x01e20000 0x40000>;
>> + reg = <0x01ef0000 0x3000>;
>> + clocks = <&gcc GCC_SMMU_CFG_CLK>,
>> + <&gcc GCC_APSS_TCU_CLK>;
>> + clock-names = "iface", "bus";
>> + qcom,iommu-secure-id = <17>;
>> +
>> + /* VFE */
>> + iommu-ctx at 3000 {
>> + compatible = "qcom,msm-iommu-v1-sec";
>> + reg = <0x3000 0x1000>;
>> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + /* MDP_0 */
>> + iommu-ctx at 4000 {
>> + compatible = "qcom,msm-iommu-v1-ns";
>> + reg = <0x4000 0x1000>;
>> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + /* VENUS_NS */
>> + iommu-ctx at 5000 {
>> + compatible = "qcom,msm-iommu-v1-sec";
>> + reg = <0x5000 0x1000>;
>> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> + };
>> +
>> + gpu_iommu: iommu at 1f08000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + #iommu-cells = <1>;
>> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
>> + ranges = <0 0x01f08000 0x10000>;
>> + clocks = <&gcc GCC_SMMU_CFG_CLK>,
>> + <&gcc GCC_GFX_TCU_CLK>;
>> + clock-names = "iface", "bus";
>> + qcom,iommu-secure-id = <18>;
>> +
>> + /* GFX3D_USER */
>> + iommu-ctx at 1000 {
>> + compatible = "qcom,msm-iommu-v1-ns";
>> + reg = <0x1000 0x1000>;
>> + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + /* GFX3D_PRIV */
>> + iommu-ctx at 2000 {
>> + compatible = "qcom,msm-iommu-v1-ns";
>> + reg = <0x2000 0x1000>;
>> + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> + };
>> +
>> + spmi_bus: spmi at 200f000 {
>> + compatible = "qcom,spmi-pmic-arb";
>> + reg = <0x0200f000 0x001000>,
>> + <0x02400000 0x400000>,
>> + <0x02c00000 0x400000>,
>> + <0x03800000 0x200000>,
>> + <0x0200a000 0x002100>;
>> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> + interrupt-names = "periph_irq";
>> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,ee = <0>;
>> + qcom,channel = <0>;
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> + interrupt-controller;
>> + #interrupt-cells = <4>;
>> + };
>> +
>> + bam_dmux_dma: dma-controller at 4044000 {
>> + compatible = "qcom,bam-v1.7.0";
>> + reg = <0x04044000 0x19000>;
>> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + qcom,ee = <0>;
>> +
>> + num-channels = <6>;
>> + qcom,num-ees = <1>;
>> + qcom,powered-remotely;
>> +
>> + status = "disabled";
>> + };
>> +
>> + mpss: remoteproc at 4080000 {
>> + compatible = "qcom,msm8916-mss-pil";
>> + reg = <0x04080000 0x100>,
>> + <0x04020000 0x040>;
>> +
>> + reg-names = "qdsp6", "rmb";
>> +
>> + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
>> + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
>> + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
>> + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "wdog", "fatal", "ready",
>> + "handover", "stop-ack";
>> +
>> + power-domains = <&rpmpd MSM8916_VDDCX>,
>> + <&rpmpd MSM8916_VDDMX>;
>> + power-domain-names = "cx", "mx";
>> +
>> + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
>> + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
>> + <&gcc GCC_BOOT_ROM_AHB_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "bus", "mem", "xo";
>> +
>> + qcom,smem-states = <&hexagon_smp2p_out 0>;
>> + qcom,smem-state-names = "stop";
>> +
>> + resets = <&scm 0>;
>> + reset-names = "mss_restart";
>> +
>> + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
>> +
>> + status = "disabled";
>> +
>> + mba {
>> + memory-region = <&mba_mem>;
>> + };
>> +
>> + mpss {
>> + memory-region = <&mpss_mem>;
>> + };
>> +
>> + bam_dmux: bam-dmux {
>> + compatible = "qcom,bam-dmux";
>> +
>> + interrupt-parent = <&hexagon_smsm>;
>> + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
>> + interrupt-names = "pc", "pc-ack";
>> +
>> + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
>> + qcom,smem-state-names = "pc", "pc-ack";
>> +
>> + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
>> + dma-names = "tx", "rx";
>> +
>> + status = "disabled";
>> + };
>> +
>> + smd-edge {
>> + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
>> +
>> + qcom,smd-edge = <0>;
>> + qcom,ipc = <&apcs 8 12>;
>> + qcom,remote-pid = <1>;
>> +
>> + label = "hexagon";
>> +
>> + fastrpc {
>> + compatible = "qcom,fastrpc";
>> + qcom,smd-channels = "fastrpcsmd-apps-dsp";
>> + label = "adsp";
>> + qcom,non-secure-domain;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cb at 1 {
>> + compatible = "qcom,fastrpc-compute-cb";
>> + reg = <1>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + sound: sound at 7702000 {
>> + status = "disabled";
>> + compatible = "qcom,apq8016-sbc-sndcard";
>> + reg = <0x07702000 0x4>, <0x07702004 0x4>;
>> + reg-names = "mic-iomux", "spkr-iomux";
>> + };
>> +
>> + lpass: audio-controller at 7708000 {
>> + status = "disabled";
>> + compatible = "qcom,apq8016-lpass-cpu";
>> +
>> + /*
>> + * Note: Unlike the name would suggest, the SEC_I2S_CLK
>> + * is actually only used by Tertiary MI2S while
>> + * Primary/Secondary MI2S both use the PRI_I2S_CLK.
>> + */
>> + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
>> + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
>> + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
>> + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
>> + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
>> + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
>> + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
>> +
>> + clock-names = "ahbix-clk",
>> + "pcnoc-mport-clk",
>> + "pcnoc-sway-clk",
>> + "mi2s-bit-clk0",
>> + "mi2s-bit-clk1",
>> + "mi2s-bit-clk2",
>> + "mi2s-bit-clk3";
>> + #sound-dai-cells = <1>;
>> +
>> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "lpass-irq-lpaif";
>> + reg = <0x07708000 0x10000>;
>> + reg-names = "lpass-lpaif";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> + lpass_codec: audio-codec at 771c000 {
>> + compatible = "qcom,msm8916-wcd-digital-codec";
>> + reg = <0x0771c000 0x400>;
>> + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
>> + <&gcc GCC_CODEC_DIGCODEC_CLK>;
>> + clock-names = "ahbix-clk", "mclk";
>> + #sound-dai-cells = <1>;
>> + };
>> +
>> + sdhc_1: mmc at 7824000 {
>> + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
>> + reg = <0x07824900 0x11c>, <0x07824000 0x800>;
>> + reg-names = "hc", "core";
>> +
>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "core", "xo";
>> + mmc-ddr-1_8v;
>> + bus-width = <8>;
>> + non-removable;
>> + status = "disabled";
>> + };
>> +
>> + sdhc_2: mmc at 7864000 {
>> + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
>> + reg = <0x07864900 0x11c>, <0x07864000 0x800>;
>> + reg-names = "hc", "core";
>> +
>> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
>> + <&gcc GCC_SDCC2_APPS_CLK>,
>> + <&xo_board>;
>> + clock-names = "iface", "core", "xo";
>> + bus-width = <4>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_dma: dma-controller at 7884000 {
>> + compatible = "qcom,bam-v1.7.0";
>> + reg = <0x07884000 0x23000>;
>> + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "bam_clk";
>> + #dma-cells = <1>;
>> + qcom,ee = <0>;
>> + };
>> +
>> + blsp1_uart1: serial at 78af000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078af000 0x200>;
>> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 0>, <&blsp_dma 1>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&blsp1_uart1_default>;
>> + pinctrl-1 = <&blsp1_uart1_sleep>;
>> + status = "disabled";
>> + };
>> +
>> + blsp1_uart2: serial at 78b0000 {
>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>> + reg = <0x078b0000 0x200>;
>> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 2>, <&blsp_dma 3>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&blsp1_uart2_default>;
>> + pinctrl-1 = <&blsp1_uart2_sleep>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_i2c1: i2c at 78b5000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x078b5000 0x500>;
>> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&i2c1_default>;
>> + pinctrl-1 = <&i2c1_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_spi1: spi at 78b5000 {
>> + compatible = "qcom,spi-qup-v2.2.1";
>> + reg = <0x078b5000 0x500>;
>> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&spi1_default>;
>> + pinctrl-1 = <&spi1_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_i2c2: i2c at 78b6000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x078b6000 0x500>;
>> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 6>, <&blsp_dma 7>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&i2c2_default>;
>> + pinctrl-1 = <&i2c2_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_spi2: spi at 78b6000 {
>> + compatible = "qcom,spi-qup-v2.2.1";
>> + reg = <0x078b6000 0x500>;
>> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 6>, <&blsp_dma 7>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&spi2_default>;
>> + pinctrl-1 = <&spi2_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_i2c3: i2c at 78b7000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x078b7000 0x500>;
>> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 8>, <&blsp_dma 9>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&i2c3_default>;
>> + pinctrl-1 = <&i2c3_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_spi3: spi at 78b7000 {
>> + compatible = "qcom,spi-qup-v2.2.1";
>> + reg = <0x078b7000 0x500>;
>> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 8>, <&blsp_dma 9>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&spi3_default>;
>> + pinctrl-1 = <&spi3_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_i2c4: i2c at 78b8000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x078b8000 0x500>;
>> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 10>, <&blsp_dma 11>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&i2c4_default>;
>> + pinctrl-1 = <&i2c4_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_spi4: spi at 78b8000 {
>> + compatible = "qcom,spi-qup-v2.2.1";
>> + reg = <0x078b8000 0x500>;
>> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 10>, <&blsp_dma 11>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&spi4_default>;
>> + pinctrl-1 = <&spi4_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_i2c5: i2c at 78b9000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x078b9000 0x500>;
>> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 12>, <&blsp_dma 13>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&i2c5_default>;
>> + pinctrl-1 = <&i2c5_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_spi5: spi at 78b9000 {
>> + compatible = "qcom,spi-qup-v2.2.1";
>> + reg = <0x078b9000 0x500>;
>> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 12>, <&blsp_dma 13>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&spi5_default>;
>> + pinctrl-1 = <&spi5_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_i2c6: i2c at 78ba000 {
>> + compatible = "qcom,i2c-qup-v2.2.1";
>> + reg = <0x078ba000 0x500>;
>> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 14>, <&blsp_dma 15>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&i2c6_default>;
>> + pinctrl-1 = <&i2c6_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + blsp_spi6: spi at 78ba000 {
>> + compatible = "qcom,spi-qup-v2.2.1";
>> + reg = <0x078ba000 0x500>;
>> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
>> + <&gcc GCC_BLSP1_AHB_CLK>;
>> + clock-names = "core", "iface";
>> + dmas = <&blsp_dma 14>, <&blsp_dma 15>;
>> + dma-names = "tx", "rx";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&spi6_default>;
>> + pinctrl-1 = <&spi6_sleep>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + usb: usb at 78d9000 {
>> + compatible = "qcom,ci-hdrc";
>> + reg = <0x078d9000 0x200>,
>> + <0x078d9200 0x200>;
>> + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_USB_HS_AHB_CLK>,
>> + <&gcc GCC_USB_HS_SYSTEM_CLK>;
>> + clock-names = "iface", "core";
>> + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
>> + assigned-clock-rates = <80000000>;
>> + resets = <&gcc GCC_USB_HS_BCR>;
>> + reset-names = "core";
>> + phy_type = "ulpi";
>> + dr_mode = "otg";
>> + hnp-disable;
>> + srp-disable;
>> + adp-disable;
>> + ahb-burst-config = <0>;
>> + phy-names = "usb-phy";
>> + phys = <&usb_hs_phy>;
>> + status = "disabled";
>> + #reset-cells = <1>;
>> +
>> + ulpi {
>> + usb_hs_phy: phy {
>> + compatible = "qcom,usb-hs-phy-msm8916",
>> + "qcom,usb-hs-phy";
>> + #phy-cells = <0>;
>> + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
>> + clock-names = "ref", "sleep";
>> + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
>> + reset-names = "phy", "por";
>> + qcom,init-seq = /bits/ 8 <0x0 0x44>,
>> + <0x1 0x6b>,
>> + <0x2 0x24>,
>> + <0x3 0x13>;
>> + };
>> + };
>> + };
>> +
>> + wcnss: remoteproc at a21b000 {
>> + compatible = "qcom,pronto-v2-pil", "qcom,pronto";
>> + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
>> + reg-names = "ccu", "dxe", "pmu";
>> +
>> + memory-region = <&wcnss_mem>;
>> +
>> + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
>> + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
>> + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
>> + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
>> +
>> + power-domains = <&rpmpd MSM8916_VDDCX>,
>> + <&rpmpd MSM8916_VDDMX>;
>> + power-domain-names = "cx", "mx";
>> +
>> + qcom,smem-states = <&wcnss_smp2p_out 0>;
>> + qcom,smem-state-names = "stop";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&wcnss_pin_a>;
>> +
>> + status = "disabled";
>> +
>> + wcnss_iris: iris {
>> + /* Separate chip, compatible is board-specific */
>> + clocks = <&rpmcc RPM_SMD_RF_CLK2>;
>> + clock-names = "xo";
>> + };
>> +
>> + smd-edge {
>> + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
>> +
>> + qcom,ipc = <&apcs 8 17>;
>> + qcom,smd-edge = <6>;
>> + qcom,remote-pid = <4>;
>> +
>> + label = "pronto";
>> +
>> + wcnss_ctrl: wcnss {
>> + compatible = "qcom,wcnss";
>> + qcom,smd-channels = "WCNSS_CTRL";
>> +
>> + qcom,mmio = <&wcnss>;
>> +
>> + wcnss_bt: bluetooth {
>> + compatible = "qcom,wcnss-bt";
>> + };
>> +
>> + wcnss_wifi: wifi {
>> + compatible = "qcom,wcnss-wlan";
>> +
>> + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "tx", "rx";
>> +
>> + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
>> + qcom,smem-state-names = "tx-enable", "tx-rings-empty";
>> + };
>> + };
>> + };
>> + };
>> +
>> + intc: interrupt-controller at b000000 {
>> + compatible = "qcom,msm-qgic2";
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
>> + <0x0b001000 0x1000>, <0x0b004000 0x2000>;
>> + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> + };
>> +
>> + apcs: mailbox at b011000 {
>> + compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
>> + reg = <0x0b011000 0x1000>;
>> + #mbox-cells = <1>;
>> + clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
>> + clock-names = "pll", "aux";
>> + #clock-cells = <0>;
>> + };
>> +
>> + a53pll: clock at b016000 {
>> + compatible = "qcom,msm8916-a53pll";
>> + reg = <0x0b016000 0x40>;
>> + #clock-cells = <0>;
>> + clocks = <&xo_board>;
>> + clock-names = "xo";
>> + };
>> +
>> + timer at b020000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0b020000 0x1000>;
>> + clock-frequency = <19200000>;
>> +
>> + frame at b021000 {
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b021000 0x1000>,
>> + <0x0b022000 0x1000>;
>> + };
>> +
>> + frame at b023000 {
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b023000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame at b024000 {
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b024000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame at b025000 {
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b025000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame at b026000 {
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b026000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame at b027000 {
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b027000 0x1000>;
>> + status = "disabled";
>> + };
>> +
>> + frame at b028000 {
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x0b028000 0x1000>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + cpu0_acc: power-manager at b088000 {
>> + compatible = "qcom,msm8916-acc";
>> + reg = <0x0b088000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu0_saw: power-manager at b089000 {
>> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
>> + reg = <0x0b089000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu1_acc: power-manager at b098000 {
>> + compatible = "qcom,msm8916-acc";
>> + reg = <0x0b098000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu1_saw: power-manager at b099000 {
>> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
>> + reg = <0x0b099000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu2_acc: power-manager at b0a8000 {
>> + compatible = "qcom,msm8916-acc";
>> + reg = <0x0b0a8000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu2_saw: power-manager at b0a9000 {
>> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
>> + reg = <0x0b0a9000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu3_acc: power-manager at b0b8000 {
>> + compatible = "qcom,msm8916-acc";
>> + reg = <0x0b0b8000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> +
>> + cpu3_saw: power-manager at b0b9000 {
>> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
>> + reg = <0x0b0b9000 0x1000>;
>> + status = "reserved"; /* Controlled by PSCI firmware */
>> + };
>> + };
>> +
>> + thermal-zones {
>> + cpu0-1-thermal {
>> + polling-delay-passive = <250>;
>> + polling-delay = <1000>;
>> +
>> + thermal-sensors = <&tsens 5>;
>> +
>> + trips {
>> + cpu0_1_alert0: trip-point0 {
>> + temperature = <75000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> + cpu0_1_crit: cpu-crit {
>> + temperature = <110000>;
>> + hysteresis = <2000>;
>> + type = "critical";
>> + };
>> + };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu0_1_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> + };
>> +
>> + cpu2-3-thermal {
>> + polling-delay-passive = <250>;
>> + polling-delay = <1000>;
>> +
>> + thermal-sensors = <&tsens 4>;
>> +
>> + trips {
>> + cpu2_3_alert0: trip-point0 {
>> + temperature = <75000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> + cpu2_3_crit: cpu-crit {
>> + temperature = <110000>;
>> + hysteresis = <2000>;
>> + type = "critical";
>> + };
>> + };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu2_3_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> + };
>> +
>> + gpu-thermal {
>> + polling-delay-passive = <250>;
>> + polling-delay = <1000>;
>> +
>> + thermal-sensors = <&tsens 2>;
>> +
>> + trips {
>> + gpu_alert0: trip-point0 {
>> + temperature = <75000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> + gpu_crit: gpu-crit {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + camera-thermal {
>> + polling-delay-passive = <250>;
>> + polling-delay = <1000>;
>> +
>> + thermal-sensors = <&tsens 1>;
>> +
>> + trips {
>> + cam_alert0: trip-point0 {
>> + temperature = <75000>;
>> + hysteresis = <2000>;
>> + type = "hot";
>> + };
>> + };
>> + };
>> +
>> + modem-thermal {
>> + polling-delay-passive = <250>;
>> + polling-delay = <1000>;
>> +
>> + thermal-sensors = <&tsens 0>;
>> +
>> + trips {
>> + modem_alert0: trip-point0 {
>> + temperature = <85000>;
>> + hysteresis = <2000>;
>> + type = "hot";
>> + };
>> + };
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +};
>> +
>> +#include "msm8916-pins.dtsi"
>> diff --git a/arch/arm/dts/pm8916.dtsi b/arch/arm/dts/pm8916.dtsi
>> new file mode 100644
>> index 000000000000..f4fb1a92ab55
>> --- /dev/null
>> +++ b/arch/arm/dts/pm8916.dtsi
>> @@ -0,0 +1,183 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
>> +#include <dt-bindings/input/linux-event-codes.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/spmi/spmi.h>
>> +
>> +&spmi_bus {
>> +
>> + pm8916_0: pmic at 0 {
>> + compatible = "qcom,pm8916", "qcom,spmi-pmic";
>> + reg = <0x0 SPMI_USID>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pon at 800 {
>> + compatible = "qcom,pm8916-pon";
>> + reg = <0x800>;
>> + mode-bootloader = <0x2>;
>> + mode-recovery = <0x1>;
>> +
>> + pwrkey {
>> + compatible = "qcom,pm8941-pwrkey";
>> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
>> + debounce = <15625>;
>> + bias-pull-up;
>> + linux,code = <KEY_POWER>;
>> + };
>> +
>> + pm8916_resin: resin {
>> + compatible = "qcom,pm8941-resin";
>> + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
>> + debounce = <15625>;
>> + bias-pull-up;
>> + status = "disabled";
>> + };
>> +
>> + watchdog {
>> + compatible = "qcom,pm8916-wdt";
>> + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
>> + timeout-sec = <60>;
>> + };
>> + };
>> +
>> + pm8916_usbin: usb-detect at 1300 {
>> + compatible = "qcom,pm8941-misc";
>> + reg = <0x1300>;
>> + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
>> + interrupt-names = "usb_vbus";
>> + status = "disabled";
>> + };
>> +
>> + pm8916_temp: temp-alarm at 2400 {
>> + compatible = "qcom,spmi-temp-alarm";
>> + reg = <0x2400>;
>> + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
>> + io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
>> + io-channel-names = "thermal";
>> + #thermal-sensor-cells = <0>;
>> + };
>> +
>> + pm8916_vadc: adc at 3100 {
>> + compatible = "qcom,spmi-vadc";
>> + reg = <0x3100>;
>> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #io-channel-cells = <1>;
>> +
>> + adc-chan at 0 {
>> + reg = <VADC_USBIN>;
>> + qcom,pre-scaling = <1 10>;
>> + };
>> + adc-chan at 7 {
>> + reg = <VADC_VSYS>;
>> + qcom,pre-scaling = <1 3>;
>> + };
>> + adc-chan at 8 {
>> + reg = <VADC_DIE_TEMP>;
>> + };
>> + adc-chan at 9 {
>> + reg = <VADC_REF_625MV>;
>> + };
>> + adc-chan at a {
>> + reg = <VADC_REF_1250MV>;
>> + };
>> + adc-chan at e {
>> + reg = <VADC_GND_REF>;
>> + };
>> + adc-chan at f {
>> + reg = <VADC_VDD_VADC>;
>> + };
>> + };
>> +
>> + rtc at 6000 {
>> + compatible = "qcom,pm8941-rtc";
>> + reg = <0x6000>, <0x6100>;
>> + reg-names = "rtc", "alarm";
>> + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>> + };
>> +
>> + pm8916_mpps: mpps at a000 {
>> + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
>> + reg = <0xa000>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&pm8916_mpps 0 0 4>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + pm8916_gpios: gpio at c000 {
>> + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
>> + reg = <0xc000>;
>> + gpio-controller;
>> + gpio-ranges = <&pm8916_gpios 0 0 4>;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +
>> + pm8916_1: pmic at 1 {
>> + compatible = "qcom,pm8916", "qcom,spmi-pmic";
>> + reg = <0x1 SPMI_USID>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pm8916_pwm: pwm {
>> + compatible = "qcom,pm8916-pwm";
>> +
>> + #pwm-cells = <2>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + pm8916_vib: vibrator at c000 {
>> + compatible = "qcom,pm8916-vib";
>> + reg = <0xc000>;
>> + status = "disabled";
>> + };
>> +
>> + wcd_codec: audio-codec at f000 {
>> + compatible = "qcom,pm8916-wcd-analog-codec";
>> + reg = <0xf000>;
>> + reg-names = "pmic-codec-core";
>> + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
>> + clock-names = "mclk";
>> + interrupt-parent = <&spmi_bus>;
>> + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
>> + <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
>> + <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
>> + <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
>> + <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
>> + <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
>> + <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
>> + <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
>> + interrupt-names = "cdc_spk_cnp_int",
>> + "cdc_spk_clip_int",
>> + "cdc_spk_ocp_int",
>> + "mbhc_ins_rem_det1",
>> + "mbhc_but_rel_det",
>> + "mbhc_but_press_det",
>> + "mbhc_ins_rem_det",
>> + "mbhc_switch_int",
>> + "cdc_ear_ocp_int",
>> + "cdc_hphr_ocp_int",
>> + "cdc_hphl_ocp_det",
>> + "cdc_ear_cnp_int",
>> + "cdc_hphr_cnp_int",
>> + "cdc_hphl_cnp_int";
>> + vdd-cdc-io-supply = <&pm8916_l5>;
>> + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
>> + vdd-micbias-supply = <&pm8916_l13>;
>> + #sound-dai-cells = <1>;
>> + };
>> + };
>> +};
>> diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h
>> new file mode 100644
>> index 000000000000..61e7bdf8ea6e
>> --- /dev/null
>> +++ b/include/dt-bindings/arm/coresight-cti-dt.h
>> @@ -0,0 +1,37 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * This header provides constants for the defined trigger signal
>> + * types on CoreSight CTI.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
>> +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
>> +
>> +#define GEN_IO 0
>> +#define GEN_INTREQ 1
>> +#define GEN_INTACK 2
>> +#define GEN_HALTREQ 3
>> +#define GEN_RESTARTREQ 4
>> +#define PE_EDBGREQ 5
>> +#define PE_DBGRESTART 6
>> +#define PE_CTIIRQ 7
>> +#define PE_PMUIRQ 8
>> +#define PE_DBGTRIGGER 9
>> +#define ETM_EXTOUT 10
>> +#define ETM_EXTIN 11
>> +#define SNK_FULL 12
>> +#define SNK_ACQCOMP 13
>> +#define SNK_FLUSHCOMP 14
>> +#define SNK_FLUSHIN 15
>> +#define SNK_TRIGIN 16
>> +#define STM_ASYNCOUT 17
>> +#define STM_TOUT_SPTE 18
>> +#define STM_TOUT_SW 19
>> +#define STM_TOUT_HETE 20
>> +#define STM_HWEVENT 21
>> +#define ELA_TSTART 22
>> +#define ELA_TSTOP 23
>> +#define ELA_DBGREQ 24
>> +#define CTI_TRIG_MAX 25
>> +
>> +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */
>> diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
>> new file mode 100644
>> index 000000000000..46309c9953b2
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/qcom,rpmcc.h
>> @@ -0,0 +1,174 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright 2015 Linaro Limited
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
>> +#define _DT_BINDINGS_CLK_MSM_RPMCC_H
>> +
>> +/* RPM clocks */
>> +#define RPM_PXO_CLK 0
>> +#define RPM_PXO_A_CLK 1
>> +#define RPM_CXO_CLK 2
>> +#define RPM_CXO_A_CLK 3
>> +#define RPM_APPS_FABRIC_CLK 4
>> +#define RPM_APPS_FABRIC_A_CLK 5
>> +#define RPM_CFPB_CLK 6
>> +#define RPM_CFPB_A_CLK 7
>> +#define RPM_QDSS_CLK 8
>> +#define RPM_QDSS_A_CLK 9
>> +#define RPM_DAYTONA_FABRIC_CLK 10
>> +#define RPM_DAYTONA_FABRIC_A_CLK 11
>> +#define RPM_EBI1_CLK 12
>> +#define RPM_EBI1_A_CLK 13
>> +#define RPM_MM_FABRIC_CLK 14
>> +#define RPM_MM_FABRIC_A_CLK 15
>> +#define RPM_MMFPB_CLK 16
>> +#define RPM_MMFPB_A_CLK 17
>> +#define RPM_SYS_FABRIC_CLK 18
>> +#define RPM_SYS_FABRIC_A_CLK 19
>> +#define RPM_SFPB_CLK 20
>> +#define RPM_SFPB_A_CLK 21
>> +#define RPM_SMI_CLK 22
>> +#define RPM_SMI_A_CLK 23
>> +#define RPM_PLL4_CLK 24
>> +#define RPM_XO_D0 25
>> +#define RPM_XO_D1 26
>> +#define RPM_XO_A0 27
>> +#define RPM_XO_A1 28
>> +#define RPM_XO_A2 29
>> +#define RPM_NSS_FABRIC_0_CLK 30
>> +#define RPM_NSS_FABRIC_0_A_CLK 31
>> +#define RPM_NSS_FABRIC_1_CLK 32
>> +#define RPM_NSS_FABRIC_1_A_CLK 33
>> +
>> +/* SMD RPM clocks */
>> +#define RPM_SMD_XO_CLK_SRC 0
>> +#define RPM_SMD_XO_A_CLK_SRC 1
>> +#define RPM_SMD_PCNOC_CLK 2
>> +#define RPM_SMD_PCNOC_A_CLK 3
>> +#define RPM_SMD_SNOC_CLK 4
>> +#define RPM_SMD_SNOC_A_CLK 5
>> +#define RPM_SMD_BIMC_CLK 6
>> +#define RPM_SMD_BIMC_A_CLK 7
>> +#define RPM_SMD_QDSS_CLK 8
>> +#define RPM_SMD_QDSS_A_CLK 9
>> +#define RPM_SMD_BB_CLK1 10
>> +#define RPM_SMD_BB_CLK1_A 11
>> +#define RPM_SMD_BB_CLK2 12
>> +#define RPM_SMD_BB_CLK2_A 13
>> +#define RPM_SMD_RF_CLK1 14
>> +#define RPM_SMD_RF_CLK1_A 15
>> +#define RPM_SMD_RF_CLK2 16
>> +#define RPM_SMD_RF_CLK2_A 17
>> +#define RPM_SMD_BB_CLK1_PIN 18
>> +#define RPM_SMD_BB_CLK1_A_PIN 19
>> +#define RPM_SMD_BB_CLK2_PIN 20
>> +#define RPM_SMD_BB_CLK2_A_PIN 21
>> +#define RPM_SMD_RF_CLK1_PIN 22
>> +#define RPM_SMD_RF_CLK1_A_PIN 23
>> +#define RPM_SMD_RF_CLK2_PIN 24
>> +#define RPM_SMD_RF_CLK2_A_PIN 25
>> +#define RPM_SMD_PNOC_CLK 26
>> +#define RPM_SMD_PNOC_A_CLK 27
>> +#define RPM_SMD_CNOC_CLK 28
>> +#define RPM_SMD_CNOC_A_CLK 29
>> +#define RPM_SMD_MMSSNOC_AHB_CLK 30
>> +#define RPM_SMD_MMSSNOC_AHB_A_CLK 31
>> +#define RPM_SMD_GFX3D_CLK_SRC 32
>> +#define RPM_SMD_GFX3D_A_CLK_SRC 33
>> +#define RPM_SMD_OCMEMGX_CLK 34
>> +#define RPM_SMD_OCMEMGX_A_CLK 35
>> +#define RPM_SMD_CXO_D0 36
>> +#define RPM_SMD_CXO_D0_A 37
>> +#define RPM_SMD_CXO_D1 38
>> +#define RPM_SMD_CXO_D1_A 39
>> +#define RPM_SMD_CXO_A0 40
>> +#define RPM_SMD_CXO_A0_A 41
>> +#define RPM_SMD_CXO_A1 42
>> +#define RPM_SMD_CXO_A1_A 43
>> +#define RPM_SMD_CXO_A2 44
>> +#define RPM_SMD_CXO_A2_A 45
>> +#define RPM_SMD_DIV_CLK1 46
>> +#define RPM_SMD_DIV_A_CLK1 47
>> +#define RPM_SMD_DIV_CLK2 48
>> +#define RPM_SMD_DIV_A_CLK2 49
>> +#define RPM_SMD_DIFF_CLK 50
>> +#define RPM_SMD_DIFF_A_CLK 51
>> +#define RPM_SMD_CXO_D0_PIN 52
>> +#define RPM_SMD_CXO_D0_A_PIN 53
>> +#define RPM_SMD_CXO_D1_PIN 54
>> +#define RPM_SMD_CXO_D1_A_PIN 55
>> +#define RPM_SMD_CXO_A0_PIN 56
>> +#define RPM_SMD_CXO_A0_A_PIN 57
>> +#define RPM_SMD_CXO_A1_PIN 58
>> +#define RPM_SMD_CXO_A1_A_PIN 59
>> +#define RPM_SMD_CXO_A2_PIN 60
>> +#define RPM_SMD_CXO_A2_A_PIN 61
>> +#define RPM_SMD_AGGR1_NOC_CLK 62
>> +#define RPM_SMD_AGGR1_NOC_A_CLK 63
>> +#define RPM_SMD_AGGR2_NOC_CLK 64
>> +#define RPM_SMD_AGGR2_NOC_A_CLK 65
>> +#define RPM_SMD_MMAXI_CLK 66
>> +#define RPM_SMD_MMAXI_A_CLK 67
>> +#define RPM_SMD_IPA_CLK 68
>> +#define RPM_SMD_IPA_A_CLK 69
>> +#define RPM_SMD_CE1_CLK 70
>> +#define RPM_SMD_CE1_A_CLK 71
>> +#define RPM_SMD_DIV_CLK3 72
>> +#define RPM_SMD_DIV_A_CLK3 73
>> +#define RPM_SMD_LN_BB_CLK 74
>> +#define RPM_SMD_LN_BB_A_CLK 75
>> +#define RPM_SMD_BIMC_GPU_CLK 76
>> +#define RPM_SMD_BIMC_GPU_A_CLK 77
>> +#define RPM_SMD_QPIC_CLK 78
>> +#define RPM_SMD_QPIC_CLK_A 79
>> +#define RPM_SMD_LN_BB_CLK1 80
>> +#define RPM_SMD_LN_BB_CLK1_A 81
>> +#define RPM_SMD_LN_BB_CLK2 82
>> +#define RPM_SMD_LN_BB_CLK2_A 83
>> +#define RPM_SMD_LN_BB_CLK3_PIN 84
>> +#define RPM_SMD_LN_BB_CLK3_A_PIN 85
>> +#define RPM_SMD_RF_CLK3 86
>> +#define RPM_SMD_RF_CLK3_A 87
>> +#define RPM_SMD_RF_CLK3_PIN 88
>> +#define RPM_SMD_RF_CLK3_A_PIN 89
>> +#define RPM_SMD_MMSSNOC_AXI_CLK 90
>> +#define RPM_SMD_MMSSNOC_AXI_CLK_A 91
>> +#define RPM_SMD_CNOC_PERIPH_CLK 92
>> +#define RPM_SMD_CNOC_PERIPH_A_CLK 93
>> +#define RPM_SMD_LN_BB_CLK3 94
>> +#define RPM_SMD_LN_BB_CLK3_A 95
>> +#define RPM_SMD_LN_BB_CLK1_PIN 96
>> +#define RPM_SMD_LN_BB_CLK1_A_PIN 97
>> +#define RPM_SMD_LN_BB_CLK2_PIN 98
>> +#define RPM_SMD_LN_BB_CLK2_A_PIN 99
>> +#define RPM_SMD_SYSMMNOC_CLK 100
>> +#define RPM_SMD_SYSMMNOC_A_CLK 101
>> +#define RPM_SMD_CE2_CLK 102
>> +#define RPM_SMD_CE2_A_CLK 103
>> +#define RPM_SMD_CE3_CLK 104
>> +#define RPM_SMD_CE3_A_CLK 105
>> +#define RPM_SMD_QUP_CLK 106
>> +#define RPM_SMD_QUP_A_CLK 107
>> +#define RPM_SMD_MMRT_CLK 108
>> +#define RPM_SMD_MMRT_A_CLK 109
>> +#define RPM_SMD_MMNRT_CLK 110
>> +#define RPM_SMD_MMNRT_A_CLK 111
>> +#define RPM_SMD_SNOC_PERIPH_CLK 112
>> +#define RPM_SMD_SNOC_PERIPH_A_CLK 113
>> +#define RPM_SMD_SNOC_LPASS_CLK 114
>> +#define RPM_SMD_SNOC_LPASS_A_CLK 115
>> +#define RPM_SMD_HWKM_CLK 116
>> +#define RPM_SMD_HWKM_A_CLK 117
>> +#define RPM_SMD_PKA_CLK 118
>> +#define RPM_SMD_PKA_A_CLK 119
>> +#define RPM_SMD_CPUSS_GNOC_CLK 120
>> +#define RPM_SMD_CPUSS_GNOC_A_CLK 121
>> +#define RPM_SMD_MSS_CFG_AHB_CLK 122
>> +#define RPM_SMD_MSS_CFG_AHB_A_CLK 123
>> +#define RPM_SMD_BIMC_FREQ_LOG 124
>> +#define RPM_SMD_LN_BB_CLK_PIN 125
>> +#define RPM_SMD_LN_BB_A_CLK_PIN 126
>> +
>> +#endif
>> diff --git a/include/dt-bindings/interconnect/qcom,msm8916.h b/include/dt-bindings/interconnect/qcom,msm8916.h
>> new file mode 100644
>> index 000000000000..359a75feb198
>> --- /dev/null
>> +++ b/include/dt-bindings/interconnect/qcom,msm8916.h
>> @@ -0,0 +1,100 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Qualcomm interconnect IDs
>> + *
>> + * Copyright (c) 2019, Linaro Ltd.
>> + * Author: Georgi Djakov <georgi.djakov at linaro.org>
>> + */
>> +
>> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
>> +#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
>> +
>> +#define BIMC_SNOC_SLV 0
>> +#define MASTER_JPEG 1
>> +#define MASTER_MDP_PORT0 2
>> +#define MASTER_QDSS_BAM 3
>> +#define MASTER_QDSS_ETR 4
>> +#define MASTER_SNOC_CFG 5
>> +#define MASTER_VFE 6
>> +#define MASTER_VIDEO_P0 7
>> +#define SNOC_MM_INT_0 8
>> +#define SNOC_MM_INT_1 9
>> +#define SNOC_MM_INT_2 10
>> +#define SNOC_MM_INT_BIMC 11
>> +#define PCNOC_SNOC_SLV 12
>> +#define SLAVE_APSS 13
>> +#define SLAVE_CATS_128 14
>> +#define SLAVE_OCMEM_64 15
>> +#define SLAVE_IMEM 16
>> +#define SLAVE_QDSS_STM 17
>> +#define SLAVE_SRVC_SNOC 18
>> +#define SNOC_BIMC_0_MAS 19
>> +#define SNOC_BIMC_1_MAS 20
>> +#define SNOC_INT_0 21
>> +#define SNOC_INT_1 22
>> +#define SNOC_INT_BIMC 23
>> +#define SNOC_PCNOC_MAS 24
>> +#define SNOC_QDSS_INT 25
>> +
>> +#define BIMC_SNOC_MAS 0
>> +#define MASTER_AMPSS_M0 1
>> +#define MASTER_GRAPHICS_3D 2
>> +#define MASTER_TCU0 3
>> +#define MASTER_TCU1 4
>> +#define SLAVE_AMPSS_L2 5
>> +#define SLAVE_EBI_CH0 6
>> +#define SNOC_BIMC_0_SLV 7
>> +#define SNOC_BIMC_1_SLV 8
>> +
>> +#define MASTER_BLSP_1 0
>> +#define MASTER_DEHR 1
>> +#define MASTER_LPASS 2
>> +#define MASTER_CRYPTO_CORE0 3
>> +#define MASTER_SDCC_1 4
>> +#define MASTER_SDCC_2 5
>> +#define MASTER_SPDM 6
>> +#define MASTER_USB_HS 7
>> +#define PCNOC_INT_0 8
>> +#define PCNOC_INT_1 9
>> +#define PCNOC_MAS_0 10
>> +#define PCNOC_MAS_1 11
>> +#define PCNOC_SLV_0 12
>> +#define PCNOC_SLV_1 13
>> +#define PCNOC_SLV_2 14
>> +#define PCNOC_SLV_3 15
>> +#define PCNOC_SLV_4 16
>> +#define PCNOC_SLV_8 17
>> +#define PCNOC_SLV_9 18
>> +#define PCNOC_SNOC_MAS 19
>> +#define SLAVE_BIMC_CFG 20
>> +#define SLAVE_BLSP_1 21
>> +#define SLAVE_BOOT_ROM 22
>> +#define SLAVE_CAMERA_CFG 23
>> +#define SLAVE_CLK_CTL 24
>> +#define SLAVE_CRYPTO_0_CFG 25
>> +#define SLAVE_DEHR_CFG 26
>> +#define SLAVE_DISPLAY_CFG 27
>> +#define SLAVE_GRAPHICS_3D_CFG 28
>> +#define SLAVE_IMEM_CFG 29
>> +#define SLAVE_LPASS 30
>> +#define SLAVE_MPM 31
>> +#define SLAVE_MSG_RAM 32
>> +#define SLAVE_MSS 33
>> +#define SLAVE_PDM 34
>> +#define SLAVE_PMIC_ARB 35
>> +#define SLAVE_PCNOC_CFG 36
>> +#define SLAVE_PRNG 37
>> +#define SLAVE_QDSS_CFG 38
>> +#define SLAVE_RBCPR_CFG 39
>> +#define SLAVE_SDCC_1 40
>> +#define SLAVE_SDCC_2 41
>> +#define SLAVE_SECURITY 42
>> +#define SLAVE_SNOC_CFG 43
>> +#define SLAVE_SPDM 44
>> +#define SLAVE_TCSR 45
>> +#define SLAVE_TLMM 46
>> +#define SLAVE_USB_HS 47
>> +#define SLAVE_VENUS_CFG 48
>> +#define SNOC_PCNOC_SLV 49
>> +
>> +#endif
>> diff --git a/include/dt-bindings/reset/qcom,gcc-msm8916.h b/include/dt-bindings/reset/qcom,gcc-msm8916.h
>> new file mode 100644
>> index 000000000000..1f9be10872df
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/qcom,gcc-msm8916.h
>> @@ -0,0 +1,100 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright 2015 Linaro Limited
>> + */
>> +
>> +#ifndef _DT_BINDINGS_RESET_MSM_GCC_8916_H
>> +#define _DT_BINDINGS_RESET_MSM_GCC_8916_H
>> +
>> +#define GCC_BLSP1_BCR 0
>> +#define GCC_BLSP1_QUP1_BCR 1
>> +#define GCC_BLSP1_UART1_BCR 2
>> +#define GCC_BLSP1_QUP2_BCR 3
>> +#define GCC_BLSP1_UART2_BCR 4
>> +#define GCC_BLSP1_QUP3_BCR 5
>> +#define GCC_BLSP1_QUP4_BCR 6
>> +#define GCC_BLSP1_QUP5_BCR 7
>> +#define GCC_BLSP1_QUP6_BCR 8
>> +#define GCC_IMEM_BCR 9
>> +#define GCC_SMMU_BCR 10
>> +#define GCC_APSS_TCU_BCR 11
>> +#define GCC_SMMU_XPU_BCR 12
>> +#define GCC_PCNOC_TBU_BCR 13
>> +#define GCC_PRNG_BCR 14
>> +#define GCC_BOOT_ROM_BCR 15
>> +#define GCC_CRYPTO_BCR 16
>> +#define GCC_SEC_CTRL_BCR 17
>> +#define GCC_AUDIO_CORE_BCR 18
>> +#define GCC_ULT_AUDIO_BCR 19
>> +#define GCC_DEHR_BCR 20
>> +#define GCC_SYSTEM_NOC_BCR 21
>> +#define GCC_PCNOC_BCR 22
>> +#define GCC_TCSR_BCR 23
>> +#define GCC_QDSS_BCR 24
>> +#define GCC_DCD_BCR 25
>> +#define GCC_MSG_RAM_BCR 26
>> +#define GCC_MPM_BCR 27
>> +#define GCC_SPMI_BCR 28
>> +#define GCC_SPDM_BCR 29
>> +#define GCC_MM_SPDM_BCR 30
>> +#define GCC_BIMC_BCR 31
>> +#define GCC_RBCPR_BCR 32
>> +#define GCC_TLMM_BCR 33
>> +#define GCC_USB_HS_BCR 34
>> +#define GCC_USB2A_PHY_BCR 35
>> +#define GCC_SDCC1_BCR 36
>> +#define GCC_SDCC2_BCR 37
>> +#define GCC_PDM_BCR 38
>> +#define GCC_SNOC_BUS_TIMEOUT0_BCR 39
>> +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40
>> +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41
>> +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42
>> +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43
>> +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44
>> +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45
>> +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46
>> +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47
>> +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48
>> +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49
>> +#define GCC_MMSS_BCR 50
>> +#define GCC_VENUS0_BCR 51
>> +#define GCC_MDSS_BCR 52
>> +#define GCC_CAMSS_PHY0_BCR 53
>> +#define GCC_CAMSS_CSI0_BCR 54
>> +#define GCC_CAMSS_CSI0PHY_BCR 55
>> +#define GCC_CAMSS_CSI0RDI_BCR 56
>> +#define GCC_CAMSS_CSI0PIX_BCR 57
>> +#define GCC_CAMSS_PHY1_BCR 58
>> +#define GCC_CAMSS_CSI1_BCR 59
>> +#define GCC_CAMSS_CSI1PHY_BCR 60
>> +#define GCC_CAMSS_CSI1RDI_BCR 61
>> +#define GCC_CAMSS_CSI1PIX_BCR 62
>> +#define GCC_CAMSS_ISPIF_BCR 63
>> +#define GCC_CAMSS_CCI_BCR 64
>> +#define GCC_CAMSS_MCLK0_BCR 65
>> +#define GCC_CAMSS_MCLK1_BCR 66
>> +#define GCC_CAMSS_GP0_BCR 67
>> +#define GCC_CAMSS_GP1_BCR 68
>> +#define GCC_CAMSS_TOP_BCR 69
>> +#define GCC_CAMSS_MICRO_BCR 70
>> +#define GCC_CAMSS_JPEG_BCR 71
>> +#define GCC_CAMSS_VFE_BCR 72
>> +#define GCC_CAMSS_CSI_VFE0_BCR 73
>> +#define GCC_OXILI_BCR 74
>> +#define GCC_GMEM_BCR 75
>> +#define GCC_CAMSS_AHB_BCR 76
>> +#define GCC_MDP_TBU_BCR 77
>> +#define GCC_GFX_TBU_BCR 78
>> +#define GCC_GFX_TCU_BCR 79
>> +#define GCC_MSS_TBU_AXI_BCR 80
>> +#define GCC_MSS_TBU_GSS_AXI_BCR 81
>> +#define GCC_MSS_TBU_Q6_AXI_BCR 82
>> +#define GCC_GTCU_AHB_BCR 83
>> +#define GCC_SMMU_CFG_BCR 84
>> +#define GCC_VFE_TBU_BCR 85
>> +#define GCC_VENUS_TBU_BCR 86
>> +#define GCC_JPEG_TBU_BCR 87
>> +#define GCC_PRONTO_TBU_BCR 88
>> +#define GCC_SMMU_CATS_BCR 89
>> +
>> +#endif
>>
>> --
>> 2.42.1
>>
--
// Caleb (they/them)
More information about the U-Boot
mailing list