[PATCH] mtd: nand: omap_gpmc: Fix NAND in SPL for AM335x
Roger Quadros
rogerq at kernel.org
Fri Dec 8 09:31:54 CET 2023
On 25/11/2023 13:16, Roger Quadros wrote:
> AM335x uses a special driver "am335x_spl_bch.c" as SPL
> NAND loader. This driver expects 1 sector at a time ECC
> and doesn't work well with multi-sector ECC that was implemented in
> commit 04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
>
> Switch back to 1 sector at a time read/ECC.
>
> Fixes: 04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
> Signed-off-by: Roger Quadros <rogerq at kernel.org>
Azure pipeline build fails. Not because of this patch though.
https://dev.azure.com/u-boot/u-boot/_build/results?buildId=7479&view=logs&j=c6c7c3ee-a125-5e20-d856-38cb989f4743&t=d274418e-7320-5c59-39b7-156cfcddae0b
> ---
> drivers/mtd/nand/raw/omap_gpmc.c | 95 ++++++++++----------------------
> 1 file changed, 29 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c
> index 1a5ed0de31..2d2d2c2b6d 100644
> --- a/drivers/mtd/nand/raw/omap_gpmc.c
> +++ b/drivers/mtd/nand/raw/omap_gpmc.c
> @@ -293,7 +293,7 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd,
> break;
> case OMAP_ECC_BCH8_CODE_HW:
> bch_type = 1;
> - nsectors = chip->ecc.steps;
> + nsectors = 1;
> if (mode == NAND_ECC_READ) {
> wr_mode = BCH_WRAPMODE_1;
> ecc_size0 = BCH8R_ECC_SIZE0;
> @@ -306,7 +306,7 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd,
> break;
> case OMAP_ECC_BCH16_CODE_HW:
> bch_type = 0x2;
> - nsectors = chip->ecc.steps;
> + nsectors = 1;
> if (mode == NAND_ECC_READ) {
> wr_mode = 0x01;
> ecc_size0 = 52; /* ECC bits in nibbles per sector */
> @@ -345,17 +345,16 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd,
> }
>
> /**
> - * _omap_calculate_ecc_bch - Generate BCH ECC bytes for one sector
> + * omap_calculate_ecc_bch - Generate BCH ECC bytes for one sector
> * @mtd: MTD device structure
> * @dat: The pointer to data on which ecc is computed
> * @ecc_code: The ecc_code buffer
> - * @sector: The sector number (for a multi sector page)
> *
> * Support calculating of BCH4/8/16 ECC vectors for one sector
> * within a page. Sector number is in @sector.
> */
> -static int _omap_calculate_ecc_bch(struct mtd_info *mtd, const u8 *dat,
> - u8 *ecc_code, int sector)
> +static int omap_calculate_ecc_bch(struct mtd_info *mtd, const u8 *dat,
> + u8 *ecc_code)
> {
> struct nand_chip *chip = mtd_to_nand(mtd);
> struct omap_nand_info *info = nand_get_controller_data(chip);
> @@ -368,7 +367,7 @@ static int _omap_calculate_ecc_bch(struct mtd_info *mtd, const u8 *dat,
> case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
> #endif
> case OMAP_ECC_BCH8_CODE_HW:
> - ptr = &gpmc_cfg->bch_result_0_3[sector].bch_result_x[3];
> + ptr = &gpmc_cfg->bch_result_0_3[0].bch_result_x[3];
> val = readl(ptr);
> ecc_code[i++] = (val >> 0) & 0xFF;
> ptr--;
> @@ -383,21 +382,21 @@ static int _omap_calculate_ecc_bch(struct mtd_info *mtd, const u8 *dat,
>
> break;
> case OMAP_ECC_BCH16_CODE_HW:
> - val = readl(&gpmc_cfg->bch_result_4_6[sector].bch_result_x[2]);
> + val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[2]);
> ecc_code[i++] = (val >> 8) & 0xFF;
> ecc_code[i++] = (val >> 0) & 0xFF;
> - val = readl(&gpmc_cfg->bch_result_4_6[sector].bch_result_x[1]);
> + val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[1]);
> ecc_code[i++] = (val >> 24) & 0xFF;
> ecc_code[i++] = (val >> 16) & 0xFF;
> ecc_code[i++] = (val >> 8) & 0xFF;
> ecc_code[i++] = (val >> 0) & 0xFF;
> - val = readl(&gpmc_cfg->bch_result_4_6[sector].bch_result_x[0]);
> + val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[0]);
> ecc_code[i++] = (val >> 24) & 0xFF;
> ecc_code[i++] = (val >> 16) & 0xFF;
> ecc_code[i++] = (val >> 8) & 0xFF;
> ecc_code[i++] = (val >> 0) & 0xFF;
> for (j = 3; j >= 0; j--) {
> - val = readl(&gpmc_cfg->bch_result_0_3[sector].bch_result_x[j]
> + val = readl(&gpmc_cfg->bch_result_0_3[0].bch_result_x[j]
> );
> ecc_code[i++] = (val >> 24) & 0xFF;
> ecc_code[i++] = (val >> 16) & 0xFF;
> @@ -431,22 +430,6 @@ static int _omap_calculate_ecc_bch(struct mtd_info *mtd, const u8 *dat,
> return 0;
> }
>
> -/**
> - * omap_calculate_ecc_bch - ECC generator for 1 sector
> - * @mtd: MTD device structure
> - * @dat: The pointer to data on which ecc is computed
> - * @ecc_code: The ecc_code buffer
> - *
> - * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
> - * when SW based correction is required as ECC is required for one sector
> - * at a time.
> - */
> -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
> - const u_char *dat, u_char *ecc_calc)
> -{
> - return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0);
> -}
> -
> static inline void omap_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
> {
> struct nand_chip *chip = mtd_to_nand(mtd);
> @@ -572,34 +555,6 @@ static void omap_nand_read_prefetch(struct mtd_info *mtd, uint8_t *buf, int len)
>
> #ifdef CONFIG_NAND_OMAP_ELM
>
> -/**
> - * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
> - * @mtd: MTD device structure
> - * @dat: The pointer to data on which ecc is computed
> - * @ecc_code: The ecc_code buffer
> - *
> - * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
> - */
> -static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd,
> - const u_char *dat, u_char *ecc_calc)
> -{
> - struct nand_chip *chip = mtd_to_nand(mtd);
> - int eccbytes = chip->ecc.bytes;
> - unsigned long nsectors;
> - int i, ret;
> -
> - nsectors = ((readl(&gpmc_cfg->ecc_config) >> 4) & 0x7) + 1;
> - for (i = 0; i < nsectors; i++) {
> - ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i);
> - if (ret)
> - return ret;
> -
> - ecc_calc += eccbytes;
> - }
> -
> - return 0;
> -}
> -
> /*
> * omap_reverse_list - re-orders list elements in reverse order [internal]
> * @list: pointer to start of list
> @@ -752,7 +707,6 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
> {
> int i, eccsize = chip->ecc.size;
> int eccbytes = chip->ecc.bytes;
> - int ecctotal = chip->ecc.total;
> int eccsteps = chip->ecc.steps;
> uint8_t *p = buf;
> uint8_t *ecc_calc = chip->buffers->ecccalc;
> @@ -760,24 +714,30 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
> uint32_t *eccpos = chip->ecc.layout->eccpos;
> uint8_t *oob = chip->oob_poi;
> uint32_t oob_pos;
> + u32 data_pos = 0;
>
> /* oob area start */
> oob_pos = (eccsize * eccsteps) + chip->ecc.layout->eccpos[0];
> oob += chip->ecc.layout->eccpos[0];
>
> - /* Enable ECC engine */
> - chip->ecc.hwctl(mtd, NAND_ECC_READ);
> + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize,
> + oob += eccbytes) {
> + /* Enable ECC engine */
> + chip->ecc.hwctl(mtd, NAND_ECC_READ);
>
> - /* read entire page */
> - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
> - chip->read_buf(mtd, buf, mtd->writesize);
> + /* read data */
> + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1);
> + chip->read_buf(mtd, p, eccsize);
>
> - /* read all ecc bytes from oob area */
> - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
> - chip->read_buf(mtd, oob, ecctotal);
> + /* read respective ecc from oob area */
> + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
> + chip->read_buf(mtd, oob, eccbytes);
> + /* read syndrome */
> + chip->ecc.calculate(mtd, p, &ecc_calc[i]);
>
> - /* Calculate ecc bytes */
> - omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc);
> + data_pos += eccsize;
> + oob_pos += eccbytes;
> + }
>
> for (i = 0; i < chip->ecc.total; i++)
> ecc_code[i] = chip->oob_poi[eccpos[i]];
> @@ -945,6 +905,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
> nand->ecc.hwctl = omap_enable_hwecc_bch;
> nand->ecc.correct = omap_correct_data_bch_sw;
> nand->ecc.calculate = omap_calculate_ecc_bch;
> + nand->ecc.steps = eccsteps;
> /* define ecc-layout */
> ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
> ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
> @@ -987,6 +948,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
> nand->ecc.correct = omap_correct_data_bch;
> nand->ecc.calculate = omap_calculate_ecc_bch;
> nand->ecc.read_page = omap_read_page_bch;
> + nand->ecc.steps = eccsteps;
> /* define ecc-layout */
> ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
> for (i = 0; i < ecclayout->eccbytes; i++)
> @@ -1020,6 +982,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
> nand->ecc.correct = omap_correct_data_bch;
> nand->ecc.calculate = omap_calculate_ecc_bch;
> nand->ecc.read_page = omap_read_page_bch;
> + nand->ecc.steps = eccsteps;
> /* define ecc-layout */
> ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
> for (i = 0; i < ecclayout->eccbytes; i++)
>
> base-commit: 9e53e45292ee2f1d9d2ccc59914b161bef9b10d7
--
cheers,
-roger
More information about the U-Boot
mailing list