[PATCH v12 12/24] cli: Enables using modern hush parser as command line parser
Francis Laniel
francis.laniel at amarulasolutions.com
Fri Dec 8 23:30:13 CET 2023
If one defines HUSH_MODERN_PARSER, it is then possible to use modern parser with:
=> cli get
old
=> cli set modern
=> cli get
modern
Reviewed-by: Simon Glass <sjg at chromium.org>
Signed-off-by: Francis Laniel <francis.laniel at amarulasolutions.com>
---
cmd/Kconfig | 12 ++++++++
cmd/Makefile | 2 +-
cmd/cli.c | 28 ++++++++++++++---
common/Makefile | 1 +
common/cli.c | 38 +++++++++++++++++++----
common/cli_hush_modern.c | 3 ++
common/cli_hush_upstream.c | 46 +++++++++++++++++++++++++---
doc/usage/cmd/cli.rst | 19 ++++++++++--
include/asm-generic/global_data.h | 4 +++
include/cli_hush.h | 51 +++++++++++++++++++++++++++++--
10 files changed, 184 insertions(+), 20 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 30ea081a10..8b49a97aca 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -34,6 +34,18 @@ config HUSH_OLD_PARSER
2005.
It is actually the default U-Boot shell when decided to use hush as shell.
+
+config HUSH_MODERN_PARSER
+ bool "Use hush modern parser"
+ help
+ This option enables the new flavor of hush based on hush upstream
+ Busybox.
+
+ This parser is experimental and not well tested.
+
+config HUSH_SELECTABLE
+ bool
+ default y if HUSH_OLD_PARSER && HUSH_MODERN_PARSER
endmenu
config CMDLINE_EDITING
diff --git a/cmd/Makefile b/cmd/Makefile
index 620f69c1c5..e260c81405 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -227,7 +227,7 @@ obj-$(CONFIG_CMD_AVB) += avb.o
# Foundries.IO SCP03
obj-$(CONFIG_CMD_SCP03) += scp03.o
-obj-$(CONFIG_HUSH_PARSER) += cli.o
+obj-$(CONFIG_HUSH_SELECTABLE) += cli.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_RISCV) += riscv/
diff --git a/cmd/cli.c b/cmd/cli.c
index 86c6471aa4..b93cc952ed 100644
--- a/cmd/cli.c
+++ b/cmd/cli.c
@@ -12,6 +12,8 @@ static const char *gd_flags_to_parser_name(void)
{
if (gd->flags & GD_FLG_HUSH_OLD_PARSER)
return "old";
+ if (gd->flags & GD_FLG_HUSH_MODERN_PARSER)
+ return "modern";
return NULL;
}
@@ -34,18 +36,31 @@ static int parser_string_to_gd_flags(const char *parser)
{
if (!strcmp(parser, "old"))
return GD_FLG_HUSH_OLD_PARSER;
+ if (!strcmp(parser, "modern"))
+ return GD_FLG_HUSH_MODERN_PARSER;
+ return -1;
+}
+
+static int gd_flags_to_parser_config(int flag)
+{
+ if (gd->flags & GD_FLG_HUSH_OLD_PARSER)
+ return CONFIG_VAL(HUSH_OLD_PARSER);
+ if (gd->flags & GD_FLG_HUSH_MODERN_PARSER)
+ return CONFIG_VAL(HUSH_MODERN_PARSER);
return -1;
}
static void reset_parser_gd_flags(void)
{
gd->flags &= ~GD_FLG_HUSH_OLD_PARSER;
+ gd->flags &= ~GD_FLG_HUSH_MODERN_PARSER;
}
static int do_cli_set(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
char *parser_name;
+ int parser_config;
int parser_flag;
if (argc < 2)
@@ -59,9 +74,14 @@ static int do_cli_set(struct cmd_tbl *cmdtp, int flag, int argc,
return CMD_RET_USAGE;
}
- if (parser_flag == GD_FLG_HUSH_OLD_PARSER &&
- !CONFIG_IS_ENABLED(HUSH_OLD_PARSER)) {
- printf("Want to set current parser to old, but its code was not compiled!\n");
+ parser_config = gd_flags_to_parser_config(parser_flag);
+ switch (parser_config) {
+ case -1:
+ printf("Bad value for parser flags: %d\n", parser_flag);
+ return CMD_RET_FAILURE;
+ case 0:
+ printf("Want to set current parser to %s, but its code was not compiled!\n",
+ parser_name);
return CMD_RET_FAILURE;
}
@@ -102,7 +122,7 @@ static int do_cli(struct cmd_tbl *cmdtp, int flag, int argc,
#if CONFIG_IS_ENABLED(SYS_LONGHELP)
static char cli_help_text[] =
"get - print current cli\n"
- "set - set the current cli, possible value is: old"
+ "set - set the current cli, possible value are: old, modern"
;
#endif
diff --git a/common/Makefile b/common/Makefile
index 23851a68e2..0d6075361a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -9,6 +9,7 @@ obj-y += init/
obj-y += main.o
obj-y += exports.o
obj-$(CONFIG_HUSH_OLD_PARSER) += cli_hush.o
+obj-$(CONFIG_HUSH_MODERN_PARSER) += cli_hush_modern.o
obj-$(CONFIG_AUTOBOOT) += autoboot.o
# # boards
diff --git a/common/cli.c b/common/cli.c
index d419671e8c..b3eb512b62 100644
--- a/common/cli.c
+++ b/common/cli.c
@@ -43,12 +43,15 @@ int run_command(const char *cmd, int flag)
return 1;
return 0;
-#else
+#elif CONFIG_IS_ENABLED(HUSH_OLD_PARSER)
int hush_flags = FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP;
if (flag & CMD_FLAG_ENV)
hush_flags |= FLAG_CONT_ON_NEWLINE;
return parse_string_outer(cmd, hush_flags);
+#else /* HUSH_MODERN_PARSER */
+ /* Not yet implemented. */
+ return 1;
#endif
}
@@ -108,7 +111,12 @@ int run_command_list(const char *cmd, int len, int flag)
buff[len] = '\0';
}
#ifdef CONFIG_HUSH_PARSER
+#if CONFIG_IS_ENABLED(HUSH_OLD_PARSER)
rcode = parse_string_outer(buff, FLAG_PARSE_SEMICOLON);
+#else /* HUSH_MODERN_PARSER */
+ /* Not yet implemented. */
+ rcode = 1;
+#endif
#else
/*
* This function will overwrite any \n it sees with a \0, which
@@ -254,8 +262,13 @@ err:
void cli_loop(void)
{
bootstage_mark(BOOTSTAGE_ID_ENTER_CLI_LOOP);
-#ifdef CONFIG_HUSH_PARSER
- parse_file_outer();
+#if CONFIG_IS_ENABLED(HUSH_PARSER)
+ if (gd->flags & GD_FLG_HUSH_MODERN_PARSER)
+ parse_and_run_file();
+ else if (gd->flags & GD_FLG_HUSH_OLD_PARSER)
+ parse_file_outer();
+
+ printf("Problem\n");
/* This point is never reached */
for (;;);
#elif defined(CONFIG_CMDLINE)
@@ -268,10 +281,23 @@ void cli_loop(void)
void cli_init(void)
{
#ifdef CONFIG_HUSH_PARSER
+ /* This if block is used to initialize hush parser gd flag. */
if (!(gd->flags & GD_FLG_HUSH_OLD_PARSER)
- && CONFIG_IS_ENABLED(HUSH_OLD_PARSER))
- gd->flags |= GD_FLG_HUSH_OLD_PARSER;
- u_boot_hush_start();
+ && !(gd->flags & GD_FLG_HUSH_MODERN_PARSER)) {
+ if (CONFIG_IS_ENABLED(HUSH_OLD_PARSER))
+ gd->flags |= GD_FLG_HUSH_OLD_PARSER;
+ else if (CONFIG_IS_ENABLED(HUSH_MODERN_PARSER))
+ gd->flags |= GD_FLG_HUSH_MODERN_PARSER;
+ }
+
+ if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
+ u_boot_hush_start();
+ } else if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
+ u_boot_hush_start_modern();
+ } else {
+ printf("No valid hush parser to use, cli will not initialized!\n");
+ return;
+ }
#endif
#if defined(CONFIG_HUSH_INIT_VAR)
diff --git a/common/cli_hush_modern.c b/common/cli_hush_modern.c
index 34278fdca2..626fed089b 100644
--- a/common/cli_hush_modern.c
+++ b/common/cli_hush_modern.c
@@ -221,6 +221,9 @@ static uint8_t xfunc_error_retval;
static const char defifsvar[] __aligned(1) = "IFS= \t\n";
#define defifs (defifsvar + 4)
+/* This define is used to check if exit command was called. */
+#define EXIT_RET_CODE -2
+
/*
* This define is used for changes that need be done directly in the upstream
* sources still. Ideally, its use should be minimized as much as possible.
diff --git a/common/cli_hush_upstream.c b/common/cli_hush_upstream.c
index 3f2e4a5495..4b6ab20f3b 100644
--- a/common/cli_hush_upstream.c
+++ b/common/cli_hush_upstream.c
@@ -7913,7 +7913,17 @@ static void parse_and_run_stream(struct in_str *inp, int end_trigger)
}
debug_print_tree(pipe_list, 0);
debug_printf_exec("parse_and_run_stream: run_and_free_list\n");
+#ifndef __U_BOOT__
run_and_free_list(pipe_list);
+#else /* __U_BOOT__ */
+ int rcode = run_and_free_list(pipe_list);
+ /*
+ * We reset input string to not run the following command, so running
+ * 'exit; echo foo' does not print foo.
+ */
+ if (rcode <= EXIT_RET_CODE)
+ setup_file_in_str(inp);
+#endif /* __U_BOOT__ */
empty = 0;
if (G_flag_return_in_progress == 1)
break;
@@ -10368,13 +10378,39 @@ static int run_list(struct pipe *pi)
#endif /* !__U_BOOT__ */
rcode = r = run_pipe(pi); /* NB: rcode is a smalluint, r is int */
#ifdef __U_BOOT__
- if (r == -2) {
- /* -2 indicates exit was called, so we need to quit now. */
- G.last_exitcode = rcode;
+ if (r <= EXIT_RET_CODE) {
+ int previous_rcode = G.last_exitcode;
+ /*
+ * This magic is to get the exit code given by the user.
+ * Contrary to old shell code, we use + EXIT_RET_CODE as EXIT_RET_CODE
+ * equals -2.
+ */
+ G.last_exitcode = -r + EXIT_RET_CODE;
- break;
+ /*
+ * This case deals with the following:
+ * => setenv inner 'echo entry inner; exit; echo inner done'
+ * => setenv outer 'echo entry outer; run inner; echo outer done'
+ * => run outer
+ * So, if we are in inner, we need to break and not run the other
+ * commands.
+ * Otherwise, we just continue in outer.
+ * As return code are propagated, we use the previous value to check if
+ * exit was just called or was propagated.
+ */
+ if (previous_rcode != r) {
+ /*
+ * If run from run_command, run_command_flags will be set, so we check
+ * this to know if we are in main input shell.
+ */
+ if (!G.run_command_flags)
+ printf("exit not allowed from main input shell.\n");
+
+ break;
+ }
+ continue;
}
-#endif
+#endif /* __U_BOOT__ */
if (r != -1) {
/* We ran a builtin, function, or group.
* rcode is already known
diff --git a/doc/usage/cmd/cli.rst b/doc/usage/cmd/cli.rst
index 89ece3203d..a0cf5958fb 100644
--- a/doc/usage/cmd/cli.rst
+++ b/doc/usage/cmd/cli.rst
@@ -26,7 +26,7 @@ cli set
It permits setting the value of the parser used by the CLI.
-Possible values are old and 2021.
+Possible values are old and modern.
Note that, to use a specific parser its code should have been compiled, that
is to say you need to enable the corresponding CONFIG_HUSH*.
Otherwise, an error message is printed.
@@ -41,7 +41,14 @@ Get the current parser::
Change the current parser::
+ => cli get
+ old
+ => cli set modern
+ => cli get
+ modern
=> cli set old
+ => cli get
+ old
Trying to set the current parser to an unknown value::
@@ -51,7 +58,15 @@ Trying to set the current parser to an unknown value::
Usage:
cli get - print current cli
- set - set the current cli, possible value is: old
+ set - set the current cli, possible values are: old, modern
+
+Trying to set the current parser to a correct value but its code was not
+compiled::
+
+ => cli get
+ modern
+ => cli set old
+ Want to set current parser to old, but its code was not compiled!
Return value
------------
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 0a9b6bd92a..99bde9ec7e 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -701,6 +701,10 @@ enum gd_flags {
* @GD_FLG_HUSH_OLD_PARSER: Use hush old parser.
*/
GD_FLG_HUSH_OLD_PARSER = 0x1000000,
+ /**
+ * @GD_FLG_HUSH_MODERN_PARSER: Use hush 2021 parser.
+ */
+ GD_FLG_HUSH_MODERN_PARSER = 0x2000000,
};
#endif /* __ASSEMBLY__ */
diff --git a/include/cli_hush.h b/include/cli_hush.h
index 2bd35670c7..007b8d6372 100644
--- a/include/cli_hush.h
+++ b/include/cli_hush.h
@@ -12,11 +12,58 @@
#define FLAG_REPARSING (1 << 2) /* >=2nd pass */
#define FLAG_CONT_ON_NEWLINE (1 << 3) /* continue when we see \n */
+#if CONFIG_IS_ENABLED(HUSH_OLD_PARSER)
extern int u_boot_hush_start(void);
-extern int parse_string_outer(const char *, int);
+extern int parse_string_outer(const char *str, int flag);
extern int parse_file_outer(void);
-
int set_local_var(const char *s, int flg_export);
+#else
+static inline int u_boot_hush_start(void)
+{
+ return 0;
+}
+
+static inline int parse_string_outer(const char *str, int flag)
+{
+ return 1;
+}
+
+static inline int parse_file_outer(void)
+{
+ return 0;
+}
+
+static inline int set_local_var(const char *s, int flg_export)
+{
+ return 0;
+}
+#endif
+#if CONFIG_IS_ENABLED(HUSH_MODERN_PARSER)
+extern int u_boot_hush_start_modern(void);
+extern int parse_string_outer_modern(const char *str, int flag);
+extern void parse_and_run_file(void);
+int set_local_var_modern(char *s, int flg_export);
+#else
+static inline int u_boot_hush_start_modern(void)
+{
+ return 0;
+}
+
+static inline int parse_string_outer_modern(const char *str, int flag)
+{
+ return 1;
+}
+
+static inline void parse_and_run_file(void)
+{
+}
+
+static inline int set_local_var_modern(char *s, int flg_export)
+{
+ return 0;
+}
+#endif
+
void unset_local_var(const char *name);
char *get_local_var(const char *s);
--
2.34.1
More information about the U-Boot
mailing list