[PATCH V3 6/7] board: rockchip: Add support for new boards to RGxx3

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Add support for the Anbernic RG-ARC-D, Anbernic RG-ARC-S, Powkiddy
RK2023, and Powkiddy RGB30 to the Anbernic RGxx3. While the Powkiddy
devices are manufactured by Powkiddy instead of Anbernic,
the hardware is so similar they can all use the same bootloader.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 44 +++++++++++++++++++---
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 7bef5a53f0..2445663d43 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -48,9 +48,13 @@ enum rgxx3_device_id {
 	RG353P,
 	RG353V,
 	RG503,
+	RGB30,
+	RK2023,
+	RGARCD,
 	/* Devices with duplicate ADC value */
 	RG353PS,
 	RG353VS,
+	RGARCS,
 };
 
 static const struct rg3xx_model rg3xx_model_details[] = {
@@ -83,6 +87,27 @@ static const struct rg3xx_model rg3xx_model_details[] = {
 		.fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb",
 		.detect_panel = 0,
 	},
+	[RGB30] = {
+		.adc_value = 383, /* Gathered from second hand information */
+		.board = "rk3566-powkiddy-rgb30",
+		.board_name = "RGB30",
+		.fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb",
+		.detect_panel = 0,
+	},
+	[RK2023] = {
+		.adc_value = 635, /* Observed average from device */
+		.board = "rk3566-powkiddy-rk2023",
+		.board_name = "RK2023",
+		.fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb",
+		.detect_panel = 0,
+	},
+	[RGARCD] = {
+		.adc_value = 183, /* Observed average from device */
+		.board = "rk3566-anbernic-rg-arc-d",
+		.board_name = "Anbernic RG ARC-D",
+		.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb",
+		.detect_panel = 0,
+	},
 	/* Devices with duplicate ADC value */
 	[RG353PS] = {
 		.adc_value = 860, /* Observed average from device */
@@ -98,6 +123,13 @@ static const struct rg3xx_model rg3xx_model_details[] = {
 		.fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb",
 		.detect_panel = 1,
 	},
+	[RGARCS] = {
+		.adc_value = 183, /* Observed average from device */
+		.board = "rk3566-anbernic-rg-arc-s",
+		.board_name = "Anbernic RG ARC-S",
+		.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb",
+		.detect_panel = 0,
+	},
 };
 
 struct rg353_panel {
@@ -332,19 +364,21 @@ int rgxx3_detect_device(void)
 	}
 
 	/*
-	 * Try to access the eMMC on an RG353V or RG353P. If it's
-	 * missing, it's an RG353VS or RG353PS. Note we could also
-	 * check for a touchscreen at 0x1a on i2c2.
+	 * Try to access the eMMC on an RG353V, RG353P, or RG Arc D.
+	 * If it's missing, it's an RG353VS, RG353PS, or RG Arc S.
+	 * Note we could also check for a touchscreen at 0x1a on i2c2.
 	 */
-	if (board_id == RG353V || board_id == RG353P) {
+	if (board_id == RG353V || board_id == RG353P || board_id == RGARCD) {
 		mmc = find_mmc_device(0);
 		if (mmc) {
 			ret = mmc_init(mmc);
 			if (ret) {
 				if (board_id == RG353V)
 					board_id = RG353VS;
-				else
+				if (board_id == RG353P)
 					board_id = RG353PS;
+				else
+					board_id = RGARCS;
 			}
 		}
 	}
-- 
2.34.1