How to boot Fedora 39

[Simon Glass]

Hi,

I tried the instructions here with a rpi4:

https://docs.fedoraproject.org/en-US/quick-docs/raspberry-pi/#_installing_fedora_on_a_raspberry_pi_for_linux_users

xzcat Fedora-Workstation-39-1.5.aarch64.raw.xz | sudo dd
status=progress bs=4M of=/dev/sdb
16843096064 bytes (17 GB, 16 GiB) copied, 151 s, 112 MB/s
0+2051288 records in
0+2051288 records out
17179869184 bytes (17 GB, 16 GiB) copied, 152.023 s, 113 MB/s


Then booted:


U-Boot 2023.07 (Oct 25 2023 - 00:00:00 +0000)

DRAM:  992 MiB (effective 3.9 GiB)
RPI 4 Model B (0xc03111)
Core:  211 devices, 17 uclasses, devicetree: board
MMC:   mmcnr at 7e300000: 1, mmc at 7e340000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   eth0: ethernet at 7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus usb at 7e980000: USB DWC2
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus usb at 7e980000 for devices... 1 USB Device(s) found
scanning bus xhci_pci for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
966711 bytes read in 105 ms (8.8 MiB/s)
Card did not respond to voltage select! : -110
No EFI system partition
No EFI system partition
Failed to persist EFI variables
Booting /efi\boot\bootaa64.efi
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
error: ../../grub-core/commands/search.c:315:no such device:
77e306d4-532a-4d8c-b023-5bde5c8689ac.



                                   GRUB version 2.06

   Minimal BASH-like line editing is supported. For the first word,
TAB lists
   possible command completions. Anywhere else TAB lists possible
device or file
   completions.


grub>


I looked at the partition list and don't see that GUID, but perhaps
U-Boot is missing some config?

U-Boot> part list mmc 0

Partition Map for MMC device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     2048            1228800         7d51a49c-01     06 Boot
  2     1230848         2097152         7d51a49c-02     83
  3     3328000         30226432        7d51a49c-03     83
U-Boot>

Regards,
Simon