[PATCH 5/7] hmibsc: Enable RAUC support

Sumit Garg sumit.garg at linaro.org
Mon Dec 18 08:24:26 CET 2023


Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
---
 include/configs/hmibsc.h | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/include/configs/hmibsc.h b/include/configs/hmibsc.h
index 04052ed6dee..b614dec7870 100644
--- a/include/configs/hmibsc.h
+++ b/include/configs/hmibsc.h
@@ -16,4 +16,42 @@
 #define PHYS_SDRAM_1_SIZE		SZ_1G
 #define CFG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
+#undef CONFIG_BOOTCOMMAND
+# define CONFIG_BOOTCOMMAND \
+	"setenv devtype mmc; setenv devnum 0; " \
+	"test -n \"${BOOT_ORDER}\" || setenv BOOT_ORDER \"A B\"; " \
+	"test -n \"${BOOT_A_LEFT}\" || setenv BOOT_A_LEFT 3; " \
+	"test -n \"${BOOT_B_LEFT}\" || setenv BOOT_B_LEFT 3; " \
+	"setenv raucslot; " \
+	"for BOOT_SLOT in \"${BOOT_ORDER}\"; do " \
+	"  if test \"x${raucslot}\" != \"x\"; then " \
+	"      echo \"skip remaining slots...\"; " \
+	"  elif test \"x${BOOT_SLOT}\" = \"xA\"; then " \
+	"    if test ${BOOT_A_LEFT} -gt 0; then " \
+	"      setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1; " \
+	"      echo \"Found valid RAUC slot A\"; " \
+	"      setenv raucslot \"rauc.slot=A\"; " \
+	"      setenv raucpart A; setenv distro_bootpart 6;" \
+	"    fi; " \
+	"  elif test \"x${BOOT_SLOT}\" = \"xB\"; then " \
+	"    if test ${BOOT_B_LEFT} -gt 0; then " \
+	"      setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1; " \
+	"      echo \"Found valid RAUC slot B\"; " \
+	"      setenv raucslot \"rauc.slot=B\"; " \
+	"      setenv raucpart B; setenv distro_bootpart 7;" \
+	"    fi; " \
+	"  fi; " \
+	"done; " \
+	"if test -n \"${raucslot}\"; then " \
+	"  setenv bootargs console=ttyMSM1 root=PARTLABEL=rootfs_${raucpart} rw rootwait ${raucslot}; " \
+	"  saveenv; " \
+	"else " \
+	"  echo \"No valid RAUC slot found. Resetting tries to 3\"; " \
+	"  setenv BOOT_A_LEFT 3; " \
+	"  setenv BOOT_B_LEFT 3; " \
+	"  saveenv; " \
+	"  reset; " \
+	"fi; " \
+	"load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} /boot/fitImage && bootm"
+
 #endif
-- 
2.34.1



More information about the U-Boot mailing list