[PATCH v2 13/17] video: rockchip: Add rk3328 vop support

Jagan Teki jagan at amarulasolutions.com
Mon Dec 18 20:11:10 CET 2023


From: Jagan Teki <jagan at edgeble.ai>

Add support for Rockchip RK3328 VOP.

Require VOP cleanup before handoff to Linux by writing reset values to
WIN registers. Without this Linux VOP trigger page fault as below
[    0.752016] Loading compiled-in X.509 certificates
[    0.787796] inno_hdmi_phy_rk3328_clk_recalc_rate: parent 24000000
[    0.788391] inno-hdmi-phy ff430000.phy: inno_hdmi_phy_rk3328_clk_recalc_rate rate 148500000 vco 148500000
[    0.798353] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops)
[    0.799403] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator
[    0.800288] rk_iommu ff373f00.iommu: Enable stall request timed out, status: 0x00004b
[    0.801131] dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator
[    0.802056] rk_iommu ff373f00.iommu: Disable paging request timed out, status: 0x00004b
[    0.803233] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[    0.805355] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[    0.808769] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops)
[    0.810869] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0

Signed-off-by: Jagan Teki <jagan at edgeble.ai>
---
Changes for v2:
- Add VOP cleanup
- Update commit

 drivers/video/rockchip/Makefile     |  1 +
 drivers/video/rockchip/rk3328_vop.c | 83 +++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+)
 create mode 100644 drivers/video/rockchip/rk3328_vop.c

diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile
index 4991303c73..f55beceebf 100644
--- a/drivers/video/rockchip/Makefile
+++ b/drivers/video/rockchip/Makefile
@@ -6,6 +6,7 @@
 ifdef CONFIG_VIDEO_ROCKCHIP
 obj-y += rk_vop.o
 obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288_vop.o
+obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328_vop.o
 obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399_vop.o
 obj-$(CONFIG_DISPLAY_ROCKCHIP_EDP) += rk_edp.o
 obj-$(CONFIG_DISPLAY_ROCKCHIP_LVDS) += rk_lvds.o
diff --git a/drivers/video/rockchip/rk3328_vop.c b/drivers/video/rockchip/rk3328_vop.c
new file mode 100644
index 0000000000..a4da3a91e8
--- /dev/null
+++ b/drivers/video/rockchip/rk3328_vop.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+#include <dm.h>
+#include <video.h>
+#include <asm/io.h>
+#include "rk_vop.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void rk3328_set_pin_polarity(struct udevice *dev,
+				    enum vop_modes mode, u32 polarity)
+{
+	struct rk_vop_priv *priv = dev_get_priv(dev);
+	struct rk3288_vop *regs = priv->regs;
+
+	switch (mode) {
+	case VOP_MODE_HDMI:
+		clrsetbits_le32(&regs->dsp_ctrl1,
+				M_RK3399_DSP_HDMI_POL,
+				V_RK3399_DSP_HDMI_POL(polarity));
+		break;
+	default:
+		debug("%s: unsupported output mode %x\n", __func__, mode);
+	}
+}
+
+static int rk3328_vop_probe(struct udevice *dev)
+{
+	/* Before relocation we don't need to do anything */
+	if (!(gd->flags & GD_FLG_RELOC))
+		return 0;
+
+	return rk_vop_probe(dev);
+}
+
+static int rk3328_vop_remove(struct udevice *dev)
+{
+	struct rk_vop_priv *priv = dev_get_priv(dev);
+	struct rk3288_vop *regs = priv->regs;
+	struct rk3288_vop *win_regs = priv->regs + priv->win_offset;
+
+	/* write reset values */
+	writel(0xef013f, &win_regs->win0_act_info);
+	writel(0xef013f, &win_regs->win0_dsp_info);
+	writel(0xa000a, &win_regs->win0_dsp_st);
+	writel(0x0, &win_regs->win0_yrgb_mst);
+	writel(0x01, &regs->reg_cfg_done);
+
+	return 0;
+}
+
+struct rkvop_driverdata rk3328_driverdata = {
+	.dsp_offset = 0x490,
+	.win_offset = 0xd0,
+	.features = VOP_FEATURE_OUTPUT_10BIT,
+	.set_pin_polarity = rk3328_set_pin_polarity,
+};
+
+static const struct udevice_id rk3328_vop_ids[] = {
+	{
+		.compatible = "rockchip,rk3328-vop",
+		.data = (ulong)&rk3328_driverdata
+	},
+	{ /* sentile */ }
+};
+
+static const struct video_ops rk3328_vop_ops = {
+};
+
+U_BOOT_DRIVER(rk3328_vop) = {
+	.name	= "rk3328_vop",
+	.id	= UCLASS_VIDEO,
+	.of_match = rk3328_vop_ids,
+	.ops	= &rk3328_vop_ops,
+	.bind	= rk_vop_bind,
+	.probe	= rk3328_vop_probe,
+	.remove = rk3328_vop_remove,
+	.priv_auto	= sizeof(struct rk_vop_priv),
+	.flags	= DM_FLAG_PRE_RELOC | DM_FLAG_OS_PREPARE,
+};
-- 
2.25.1



More information about the U-Boot mailing list